Stihl 1127 · Section B · 2 of 12 · 19 parts
Cylinder 039
Fits 039.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (19)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1127 020 1213 | Cylinder with piston Ø 49 mm — 64.0 cc | 1 |
| 2 | 1127 030 2005 | Piston Ø 49 mm — 64.0 cc | 1 |
| 3 | 1127 034 3007 | Piston ring Ø 49x1.5 mm — 64.0 cc | 2 |
| 3 | 1127 034 3000 | Piston ring Ø 49x1.5 mm — 64.0 cc | 2 |
| 4 | 1110 034 1500 | Piston pin 10x6x32 | 1 |
| 5 | 9463 650 1000 | Snap ring 10 | 2 |
| 6 | 0000 988 5211 | Connector | 1 |
| 7 | 9512 003 2340 | Needle cage 10x14x13 | 1 |
| 8 | 1127 030 0402 NLA | Crankshaft | 1 |
| 8 | 1127 030 0411 | Crankshaft | 1 |
| 9 | 9503 003 0440 | Grooved ball bearing 6203 | 2 |
| 10 | 9639 010 1743 | Oil seal 17x30x4.4 | 2 |
| 10 | 9639 003 1743 | Oil seal 17x30x4.4 | 2 |
| 11 | 1127 021 2500 | Engine pan | 1 |
| 13 | 9075 478 4735 | Pan head self-tapping screw IS-D6x52 | 4 |
| 14 | 0783 830 2000 | Tube of sealant Dirko HT red | 1 |
| 15 | 1127 084 0900 | Shroud | 1 |
| 17 | 1127 084 4100 | Shutter | 1 |
| 18 | 9075 478 3015 | Pan head self-tapping screw IS-D4x15 | 2 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 029 / 039
029 / 039: black ring compressor covers three piston sizes
1127 893 2601 covers 029 pistons of 45/46 mm and the 039 piston of 49 mm.
- Historical TI46/1997 guidance for the named 029/039 configurations only, not MS successors or every shared-sheet variant. No hardware operation was performed.
- Ring compressor 1127 893 2600 had to be modified for the larger 029 piston. New 1127 893 2601 is BLACK plastic rather than WHITE and is suitable for all stated 029 pistons (45 mm,46 mm) and 039 pistons (49 mm). The old tool is not thereby approved for the larger piston.
- Original tool supplied from factory only while stocks last; introduction in progress. Tool compatibility is not cylinder or piston interchange.
Source: TI 46/1997, p. 1 · TI 46/1997, p. 2 — Section 1 service note and summary row 7.
Part numbers (2)
- 1127 893 2600 — Original white ring compressorSpecial tool · Only stated 029/039 diameters
- 1127 893 2601 — New black ring compressorSpecial tool · Only stated 029/039 diameters
Conditional replacement · 039
039: revised cylinder keeps displacement and mounting dimensions
Combustion chamber and ports change; the 029 SUPER bore increase does not apply to 039.
- Historical TI46/1997 guidance for the named 029/039 configurations only, not MS successors or every shared-sheet variant. No hardware operation was performed.
- Combustion-chamber and cylinder-port modifications optimize combustion to reduce emissions. Displacement, bore, stroke and cylinder mounting dimensions remain unchanged.
- Cylinder with piston 1127 020 1201 becomes 1127 020 1211; all other parts included in that assembly remain unchanged. Old assembly supplied only while factory stocks last; introduction in progress without a serial cutoff.
- The retained later IPL lists cylinder 1127 020 1213. This does not rewrite the TI’s 1211 number or establish the missing intervening revision history.
Source: TI 46/1997, p. 2 — Section 2 complete.
Part numbers (2)
- 1127 020 1201 — Original cylinder with pistonHistorical cylinder assembly · 039 only
- 1127 020 1211 — Revised cylinder with pistonHistorical cylinder assembly · 039 only
Wrong number or missing part for the 039? Report a correction →