← 029/039 · MS 290/310/390

Stihl 1127 · Section C · 3 of 12 · 31 parts

Engine housing

Fits 029, 039.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516161717181819220212223242526272829330456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (31)

PosPart numberDescriptionQty
1 1127 020 3003 Engine housing Fitment / change note → 1
2 1128 640 9100 Valve 1
3 0000 974 1200 Notched pin 2.6x8 1
4 1120 162 5200 Pin 1
5 1127 664 2400 Collar screw 1
6 1127 790 9900 Annular buffer 1
7 9645 945 7444 O-ring 4x1.5 1
8 1121 162 5200 Pin 1
9 1123 162 5205 Pin 1
10 1123 162 5200 Pin 1
11 0000 967 3662 Warning pictogram MS 1
12 1127 664 2405 Collar screw 1
13 0000 350 0525 Filler cap Fitment / change note → 2
14 9645 948 7734 O-ring 25x3.5 2
15 1127 350 0500 Filler cap Fitment / change note → 1
16 0000 359 1220 Sealing ring 1
17 0000 350 0900 Rope 1
18 0000 353 0600 Hook 1
19 0000 350 0520 Filler cap Fitment / change note → → replaced by 1127 350 0500 TI 48/1995 1
20 1123 791 7300 Plug 1
21 1117 350 5800 Tank vent → replaced by 0000 350 5802, 0000 350 5800 TI 5/2002 1
22 1120 358 8105 Vent insert 2
23 1127 358 7703 Hose 1
24 0000 350 3500 Pickup body Fitment / change note → 1
25 not sold separately Spur gear not available as a separate item 1
26 not sold separately Adjusting screw not available as a separate item 1
27 1127 640 1900 Tensioner slide 1
28 1123 664 1400 Thrust pad 1
29 1127 664 2200 Cover 1
30 9075 478 3015 Pan head self-tapping screw IS-D4x15 1
Not numbered on the diagram — assemblies, kits and options
— 1127 007 1003 Spur gear / chain adjusting screw kit 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 029 / 039

029 / 039 fuel pickup: standardized replacement, no serial cutoff

0000 350 3500 replaces 1127 350 3500; timing wording is retained.

  • Fuel pickup 0000 350 3500 replaces 1127 350 3500. Prose says installed FOR SOME TIME; table says introduction IN PROGRESS. Preserve both timing descriptions without inventing a serial or borrowing the chain-brake cutoff.
  • Improved operation, longer service life and better filtration are attributed TI claims, not measured performance or a specified replacement interval. Standardization with unnamed other models does not authorize arbitrary cross-model fitment.
  • Original pickup no longer factory available; new MOQ 1. Summary key is blank. Later exact 029/039 C sheet key 24 lists 0000 350 3500; this is the FUEL pickup, not the distinct oil pickup on sheet D.
  • Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 25/1995, p. 2 — Section2, summary and supply remark.

Part numbers (2)
  • 1127 350 3500 — Original fuel pickup bodyno longer factory available · 029 / 039; Section 2, summary and supply remark
  • 0000 350 3500 — Standardized fuel pickup bodynew; MOQ 1 · 029 / 039; Section 2, summary and supply remark

Conditional replacement · 029 / 039

029/039 lugged fuel cap: exclusive model restriction from X 33 373 883

1127 350 0500 replaces the fuel cap only; oil cap remains unchanged.

X 33 373 883 — Fuel-cap/housing-content change introduced from this machine number for 029/039 only; not a model-identification range or a spark-plug-cover deletion cutoff.

  • From machine number X 33 373 883, the FUEL tank filler cap changes from 0000 350 0520 to 1127 350 0500 on 029 and 039. The X prefix is retained literally; this is a model-conditioned changeover, not a production range identifying every higher serial.
  • The figure’s arrow identifies a lug providing better tightening leverage. The new cap is EXCLUSIVELY for the FUEL tanks of 029 and 039 and MUST NOT be used on other models: an unfavorable lug position could be knocked accidentally and loosen the cap. No universal-thread or MS-successor interchange is inferred.
  • The OIL tank filler cap remains unchanged. The summary’s continuing 0000 350 0520 row is therefore not a contradiction or proof the fuel cap stayed the same. New cap MOQ H is 1; this ordering column is not a general installed-quantity field.
  • Historical TI evidence, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; their later edition is not backdated to 1995.

Source: TI 48/1995, p. 1 — 029/039 lugged fuel cap: exclusive model restriction from X 33 373 883.

Part numbers (2)
  • 0000 350 0520 — Original fuel cap; retained unchanged oil-cap numberoriginal · 029/039; fuel use before change, oil use retained
  • 1127 350 0500 — Lugged fuel tank filler capnew · 029/039 fuel tanks exclusively

Historical fitment · 029 / 039

029/039 engine housing keeps its number while cap contents change

1127 020 3000 unchanged number; old-style cap quantity falls from two to one.

X 33 373 883 — Fuel-cap/housing-content change introduced from this machine number for 029/039 only; not a model-identification range or a spark-plug-cover deletion cutoff.

  • Replacement engine housing 1127 020 3000 retains the SAME number in both original/new table columns. Factory-supplied housings come only with the new fuel-cap version; remark 1 says only the modified housing version is available from the factory. This is a historical supply rule, not current availability.
  • Within the housing’s “including” list, 0000 350 0520 remains the same number in both columns, but remark 2 reduces its quantity from TWO TO ONE. The fuel cap 1127 350 0500 is the added row (original column dash, MOQ H 1); the oil cap is explicitly unchanged. Do not delete the old number globally or count two unchanged caps after the modification.
  • The page repeats introduction from X 33 373 883. No housing dimension or interchange assertion beyond these component/supply changes is supplied. All other parts remain as before.
  • Historical TI evidence, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; their later edition is not backdated to 1995.

Source: TI 48/1995, p. 1 — 029/039 engine housing keeps its number while cap contents change.

Part numbers (3)
  • 1127 020 3000 — Engine housing; modified supplied cap contentsretained-number · 029/039 factory replacement housing
  • 0000 350 0520 — Cap quantity reduced from 2 to 1retained · 029/039 housing contents; oil cap unchanged
  • 1127 350 0500 — New fuel cap included with replacement housingnew · 029/039 only

Historical fitment · 029 / 039

029 / 039: quarter-turn caps require the revised housing context

From 1 40 158 284, except spark-arrestor versions introduced later; original parts remain available for unaffected machines.

1 40 158 284 — 029 / 039 revised filler caps AND housing; excludes spark-arrestor versions until an unspecified later introduction. Not a model-identification range.

  • From machine number 1 40 158 284, 029 and 039 receive newly developed filler caps. The engine housing is MODIFIED IN THE AREA OF THE FILLER OPENINGS and changes from 1127 020 3000 to 1127 020 3003. This is a model-conditioned equipment change, not a serial range identifying every higher-numbered machine.
  • EXCEPTION: versions with a SPARK ARRESTING SCREEN IN THE MUFFLER receive this modification AT A LATER DATE. No later date or separate serial cutoff is given. The repeated page 2 cutoff explicitly says see Note; do not apply it universally to spark-arrestor versions.
  • The new housing 1127 020 3003 is supplied INCLUDING THE FILLER CAPS to facilitate replacement. Both tank caps are now 0000 350 0525: fuel replaces 1127 350 0500 and oil replaces 0000 350 0520. This paired housing/cap change does not establish a cap-only retrofit into the original filler openings; no conversion dimensions or machining procedure are printed.
  • Summary item 4: instruction label 0000 967 3692 has a dash in the new-version column, with no replacement number. Remark 1 applies to ALL FOUR summary rows: original housing, fuel cap, oil cap and label remain available FOR OLDER MACHINES AND VERSIONS NOT YET AFFECTED BY THE CHANGE. Not a global deletion of old parts or a promise of present-day stock. All other parts as before.
  • The retained 01-2012 USA 029/039 engine-housing C sheet lists housing 3003 at position 1; cap 0525 at position 13, quantity 2; original fuel cap 0500 at position 15 and oil cap 0520 at position 19, each quantity 1. These are alternatives across configurations, not five caps on one saw. The old housing 3000 and instruction label 3692 are absent from that sheet; the later warning pictogram 3662 is not a TI-specified replacement for 3692.
  • The catalog also carries the older TI 48/1995 fuel-cap supersession on cap 0520. That older fuel-only change does not erase the distinct original OIL cap row in this 1998 table. This bulletin describes a later, revised-opening design; it does not retroactively make the earlier lugged fuel cap universal or extend the new cutoff to MS successors.
  • Footer reference TI 46/1997 is a last-bulletin locator, not a missing prerequisite or a new interchange rule. Copyright 1998, D1/MTK-sc and documentation number 6289 are bibliographic context.
  • Historical TI 15/1998 for 029 and 039 only. The shared series and later catalog do not extend this introduction to MS 290, MS 310 or MS 390. Supply statements are historical, not current stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 15/1998, p. 1 · TI 15/1998, p. 2 — Page1 introduction, housing change and spark-arrestor exception; page2 availability, all four summary rows, serial repeat, remark and footer.

Part numbers (6)
  • 1127 020 3000 — Original engine housingOriginal; retained for unaffected machines · 029 / 039 original filler openings
  • 1127 020 3003 — Modified engine housing, includes filler capsNew housing with revised filler openings · 029 / 039; spark-arrestor introduction delayed
  • 1127 350 0500 — Original fuel tank filler capOriginal fuel cap retained for unaffected machines · 029 / 039 original fuel opening
  • 0000 350 0520 — Original oil tank filler capOriginal oil cap retained for unaffected machines · 029 / 039 original oil opening
  • 0000 350 0525 — New common fuel and oil filler capNew cap; supplied with modified housing · 029 / 039 revised openings; one cap for each tank
  • 0000 967 3692 — Original instruction labelNo new-version replacement number; old label remains available historically · Older and not-yet-modified 029 / 039

Service note · 029 / 039

029 / 039: hinged-cap opening and closing sequence

Align the marks before the clockwise quarter-turn; fold the handle down after reaching the stop.

  • This illustrated sequence applies to the NEW QUARTER-TURN CAPS and revised filler openings described in TI 15/1998, not the earlier lugged/threaded cap. The opening illustration starts from the closed position: (1) fold the handle OUTWARDS; (2) twist ONE QUARTER TURN COUNTERCLOCKWISE; (3) remove the cap. Figures 139TI023–026 show the closed state, hinge movement, rotation and removal respectively.
  • Closing: (1) fit the cap with handle pointing OUTWARDS and MARKS LINED UP; (2) twist ONE QUARTER TURN CLOCKWISE AS FAR AS THE STOP; (3) fold the handle DOWN. Figures 139TI027–029 and the repeated closed-state139TI023 show the alignment marks and movement arrows. No tightening torque or extra turn is specified.
  • All six stated advantages are retained: tool-free opening/closing; hinged handle for quick/simple operation; smooth surface without ribs/recesses that stays clean; low profile that does not snag branches; snaps into the closed position; identical fuel and oil caps. These are source design descriptions, not independent performance or leak-test results.
  • The fuel/oil common-cap statement is limited to this revised design. The drawings do not authorize refueling, starting a machine, machining old openings or substituting the procedure for an exact-machine owner’s manual. No hardware operation was performed.
  • Historical TI 15/1998 for 029 and 039 only. The shared series and later catalog do not extend this introduction to MS 290, MS 310 or MS 390. Supply statements are historical, not current stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 15/1998, p. 1 · TI 15/1998, p. 2 — Page1 all six advantages, overview and complete opening sequence; page2 complete closing sequence, alignment marks, rotation arrows and closed position.

No additional parts-table entry added.

Wrong number or missing part for the 029, 039? Report a correction →