Stihl 1127 · Section J · 9 of 12 · 37 parts
Carburetor HD-19C
Fits 029, 039.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (37)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4116 121 5100 | Inlet needle | 1 |
| 2 | 4116 121 5000 | Inlet control lever | 1 |
| 3 | 4116 122 3002 | Spring | 1 |
| 4 | 1113 121 9200 | Spindle | 1 |
| 5 | 1114 122 7400 | Round head screw | 1 |
| 6 | 1128 121 5403 | Valve jet Fitment / change note → | 1 |
| 7 | 4117 122 9402 | Plug | 1 |
| 8 | 1128 129 0906 | Gasket Fitment / change note → | 1 |
| 9 | 4116 121 4700 | Metering diaphragm | 1 |
| 10 | 1128 121 0801 | End cover Fitment / change note → | 1 |
| 11 | 1121 122 7101 | Screw Fitment / change note → | 4 |
| 12 | 4116 121 4800 | Pump diaphragm | 1 |
| 13 | 4116 129 0902 | Gasket | 1 |
| 14 | 1127 121 0800 | End cover | 1 |
| 15 | 1114 122 7100 | Screw | 1 |
| 16 | 1127 122 3200 | Torsion spring | 1 |
| 17 | 1127 120 7100 | Throttle shaft with lever | 1 |
| 18 | 1117 122 9000 | E-clip | 1 |
| 19 | 1127 121 3301 | Throttle shutter | 1 |
| 20 | 1115 122 7400 | Round head screw | 1 |
| 21 | 1127 122 3205 | Torsion spring | 1 |
| 22 | 1127 120 7200 | Choke shaft with lever | 1 |
| 23 | 1123 122 9000 | E-clip | 1 |
| 24 | 1122 121 2900 | Choke shutter | 1 |
| 25 | 1110 122 7400 | Round head screw | 1 |
| 26 | 1127 122 6201 | Idle speed adjustment screw | 1 |
| 27 | 1128 122 3003 | Spring Fitment / change note → | 2 |
| 28 | 1127 122 6701 | High speed adjustment screw Fitment / change note → | 1 |
| 29 | 1128 122 6803 | Low speed adjustment screw | 1 |
| 30 | 4203 122 3600 | Sealing ring | 1 |
| 31 | 1114 121 7800 | Strainer | 1 |
| 32 | 1122 121 7700 | Clamp | 1 |
| 33 | 1127 121 5602 | Fixed jet 0.58 Fitment / change note → | 1 |
| 34 | 1130 121 5600 NLA | Fixed jet 0.54 option | 1 |
| 35 | 4116 121 0800 | End cover Fitment / change note → option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1127 120 0650 | Carburetor HD-19C Fitment / change note → | 1 |
| — | 1127 007 1062 | Set of carburetor parts Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 029 / 039
029 / 039 non-EPA: HD19A replacement and complete component changes
HD19A replaces HD5 only on machines without EPA approval; the original end cover is supplied for non-compensator machines.
- Historical TI46/1997 guidance for the named 029/039 configurations only, not MS successors or every shared-sheet variant. No hardware operation was performed.
- New replacement HD19A 1127 120 0650 is for all 029/039 WITHOUT EPA approval. HD5 1127 120 0601 is no longer available from factory. Original end cover 4116 121 0800 comes with HD19A for use on machines WITHOUT compensator; the drawing shows both end-cover forms. This is not EPA-removal advice.
- Rows 3–6: valve jet 1115 121 5401 →1128 121 5403; gasket 1127 129 0900 →1128 129 0906; end cover 4116 121 0800 →1128 121 0801; round-head screw 1106 122 7400 →1121 122 7101.
- Rows 7–9: two springs 4116 122 3001 →1128 122 3003; H screw 1127 122 6700 →1127 122 6701; L screw 4116 122 6800 →1127 122 6802. Each new screw includes item 10 sealing ring. Item 10 has no orderable number and is NOT available separately; the printed -*- is not a part number.
- Rows 11–13: retaining ring 1116 122 9000 has no new counterpart; fixed jet 58 changes 1127 121 5600 →1127 121 5602; sealing ring 1120 122 3600 has no new counterpart. All other parts as HD5. The dash does not itself authorize omitting an old part from an older assembly.
- Carburetor parts kit 1127 007 1060 →1127 007 1062 includes changed gasket item 4; all other parts as before. Remark 1 retains all marked original components and original kit as spares for older machines, distinct from HD5’s no-longer-available remark 2. Introduction in progress.
- The later IPL calls 1127 120 0650 HD19C; do not silently relabel this TI’s HD19A or copy later internals backward.
Source: TI 46/1997, p. 6 · TI 46/1997, p. 7 — Section 3.5 HD5/HD19A diagram, rows 3–13, kit and remarks 1–4.
Part numbers (22)
- 1127 120 0601 — Original HD5Original or new as described · 029/039 NON-EPA only; match component version
- 1127 120 0650 — Replacement HD19AOriginal or new as described · 029/039 NON-EPA only; match component version
- 1115 121 5401 — Original valve jetOriginal or new as described · 029/039 NON-EPA only; match component version
- 1128 121 5403 — New valve jetOriginal or new as described · 029/039 NON-EPA only; match component version
- 1127 129 0900 — Original gasketOriginal or new as described · 029/039 NON-EPA only; match component version
- 1128 129 0906 — New gasketOriginal or new as described · 029/039 NON-EPA only; match component version
- 4116 121 0800 — Original end cover; also supplied for no compensatorOriginal or new as described · 029/039 NON-EPA only; match component version
- 1128 121 0801 — New compensator end coverOriginal or new as described · 029/039 NON-EPA only; match component version
- 1106 122 7400 — Original round-head screwOriginal or new as described · 029/039 NON-EPA only; match component version
- 1121 122 7101 — New round-head screwOriginal or new as described · 029/039 NON-EPA only; match component version
- 4116 122 3001 — Original spring, twoOriginal or new as described · 029/039 NON-EPA only; match component version
- 1128 122 3003 — New spring, twoOriginal or new as described · 029/039 NON-EPA only; match component version
- 1127 122 6700 — Original H screwOriginal or new as described · 029/039 NON-EPA only; match component version
- 1127 122 6701 — New H screw including ringOriginal or new as described · 029/039 NON-EPA only; match component version
- 4116 122 6800 — Original L screwOriginal or new as described · 029/039 NON-EPA only; match component version
- 1127 122 6802 — New L screw including ringOriginal or new as described · 029/039 NON-EPA only; match component version
- 1116 122 9000 — Original retaining ringOriginal or new as described · 029/039 NON-EPA only; match component version
- 1127 121 5600 — Original jet 58Original or new as described · 029/039 NON-EPA only; match component version
- 1127 121 5602 — New jet 58Original or new as described · 029/039 NON-EPA only; match component version
- 1120 122 3600 — Original sealing ringOriginal or new as described · 029/039 NON-EPA only; match component version
- 1127 007 1060 — Original carburetor kitOriginal or new as described · 029/039 NON-EPA only; match component version
- 1127 007 1062 — New carburetor kitOriginal or new as described · 029/039 NON-EPA only; match component version
Wrong number or missing part for the 029, 039? Report a correction →