Stihl 1128 · Section M · 12 of 17 · 43 parts
Carburetor C3M-S12B automatic choke
Fits 044.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (43)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4116 121 5100 | Inlet needle | 1 |
| 2 | 1125 121 5000 | Inlet control lever | 1 |
| 3 | 1128 122 3000 | Spring | 1 |
| 4 | 1120 121 9200 | Spindle | 1 |
| 5 | 1120 122 6600 | Collar screw | 1 |
| 6 | 1125 121 0700 | Cup plug | 1 |
| 7 | 1125 129 0901 | Gasket | 1 |
| 8 | 1125 121 4700 | Metering diaphragm | 1 |
| 9 | 1128 121 5400 | Valve jet Fitment / change note → | 1 |
| 10 | 1128 121 0800 | End cover | 1 |
| 11 | 1128 120 7102 | Throttle shaft with lever Fitment / change note → | 1 |
| 12 | 1120 122 6601 | Collar screw | 4 |
| 13 | 1125 122 4200 | Clamp | 1 |
| 14 | 1128 121 4802 | Pump diaphragm Fitment / change note → | 1 |
| 15 | 1125 129 0900 | Gasket | 1 |
| 16 | 1128 120 0800 | End cover | 1 |
| 17 | 1120 122 7800 | Oval head screw | 1 |
| 18 | 1128 122 3204 | Torsion spring | 1 |
| 19 | 1123 121 7800 | Strainer | 1 |
| 20 | 1125 122 9001 | E-clip | 1 |
| 21 | 1128 121 3300 | Throttle shutter | 1 |
| 23 | 1128 122 3203 | Torsion spring | 1 |
| 24 | not sold separately | Choke lever not available as a separate item | 1 |
| 25 | 1128 120 7201 | Choke shaft with lever | 1 |
| 26 | 1128 122 3202 | Torsion spring | 1 |
| 27 | 1125 122 9002 | E-clip | 1 |
| 28 | 1128 121 2901 | Choke shutter | 1 |
| 29 | 1125 122 7403 | Round head screw | 2 |
| 30 | 1128 122 6200 | Idle speed adjustment screw | 1 |
| 31 | 1120 122 3005 | Spring | 2 |
| 32 | 1125 122 6700 | High speed adjustment screw Fitment / change note → | 1 |
| 33 | 1128 122 6800 | Low speed adjustment screw Fitment / change note → | 1 |
| 34 | 1128 122 3205 | Torsion spring | 1 |
| 35 | 1128 120 9500 | Set of carburetor levers | 1 |
| 36 | 1124 121 9100 | Bushing | 1 |
| 50 | 1125 121 0803 | End cover Fitment / change note → | 1 |
| 51 | 1128 121 5401 | Valve jet Fitment / change note → | 1 |
| 52 | 1125 122 6701 | High speed adjustment screw Fitment / change note → | 1 |
| 53 | 1128 122 6802 | Low speed adjustment screw Fitment / change note → | 1 |
| 54 | 1128 120 7104 | Throttle shaft with lever Fitment / change note → | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1128 120 0615 | Carburetor C3M-S12B Fitment / change note → | 1 |
| — | 1128 007 1065 | Set of carburetor parts Fitment / change note → | 1 |
| — | 1128 120 0603 | Carburetor C3M-S12A Fitment / change note → no longer available from factory | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 044
044 automatic choke: serial table has a production exception
C3M-S12B replaces earlier automatic-choke carburetors, but S21 production continues temporarily. Replacing S12A requires a compensator-compatible filter or a separately ordered non-compensator end cover.
- Column A up to X 26 452 475 lists C3M-S12A 1128 120 0603. Column B from X 26 452 476 to X 28 047 977 lists C3M-S21 1128 120 0609. Column C from X 28 047 978 lists C3M-S12B 1128 120 0615 with an explicit note.
- The note says automatic-choke saws will still be built for a while with C3M-S21; C3M-S12B is already being shipped as a replacement unit. Therefore X 28 047 978 is not a guaranteed automatic-choke production cutoff. No end serial for the exception is supplied.
- When replacing S12A 1128 120 0603 with S12B 1128 120 0615, either install an air filter with compensator connection OR replace the supplied compensator end cover with 1125 121 0803 without a compensator connection. The latter must be ordered separately.
- The A/C idle-system relationship and B-to-C component roster apply to the named configuration, not an automatic conversion of every carburetor. The source summary marks old S21 as no longer supplied from the factory, while the narrative preserves temporary production use; these are different supply contexts.
- TI54/1992, referenced for earlier A-to-B changes, is absent from the retained corpus. This is not replaced by an inferred generic conversion procedure.
- TI16/1994 is dated March 21, 1994. Historical availability and production statements are not present inventory or verified physical interchange; no successor-model applicability is inferred.
Source: TI 16/1994, p. 3 · TI 16/1994, p. 4 — Automatic-choke table row, column-C note and service note.
Part numbers (4)
- 1128 120 0603 — Automatic-choke C3M-S12AHistorical version · 044 configuration described in this record
- 1128 120 0609 — Automatic-choke C3M-S21Historical version · 044 configuration described in this record
- 1128 120 0615 — Automatic-choke C3M-S12BHistorical version · 044 configuration described in this record
- 1125 121 0803 — End cover without compensator connectionHistorical version · 044 configuration described in this record
Historical fitment · 044
044 C3M: B-to-C component changes retain two throttle shafts
Valve jet and adjusting screws change with the return to the earlier idle system. Standard/heated carburetors and automatic-choke carburetors use different throttle-shaft rows.
- Table items1–4 are pump diaphragm, valve jet, high-speed and low-speed adjusting screws. Standard S20/S5G and heated S22/S23 assemblies include items1–4 plus5; automatic-choke S21/S12B assemblies include items1–4 plus6.
- Valve jet 1128 121 5401 → 1128 121 5400; high-speed screw 1125 122 6701 → 1125 122 6700; low-speed screw 1128 122 6802 → 1128 122 6800.
- Item5 standard/heated throttle shaft with lever: 1128 120 7103 → 1128 120 7100. Item6 automatic-choke shaft: 1128 120 7104 → 1128 120 7102. Do not collapse these into one interchangeable throttle shaft.
- The old valve jet, both adjusting screws and both throttle shafts remain available as spares; all other parts are as before. Pump diaphragm availability differs and is separately recorded. No mixture setting, turn count or RPM is supplied.
- The summary says introduced from X 28 047 978, subject to the automatic-choke S21 production exception on page3. Earlier A-to-B changes still depend on missing TI54/1992.
- TI16/1994 is dated March 21, 1994. Historical availability and production statements are not present inventory or verified physical interchange; no successor-model applicability is inferred.
Source: TI 16/1994, p. 3 · TI 16/1994, p. 4 — Sections2.2–2.3, inclusion keys and availability remarks.
Part numbers (10)
- 1128 121 5401 — Old valve jetHistorical version · 044 configuration described in this record
- 1128 121 5400 — New valve jetHistorical version · 044 configuration described in this record
- 1125 122 6701 — Old high-speed screwHistorical version · 044 configuration described in this record
- 1125 122 6700 — New high-speed screwHistorical version · 044 configuration described in this record
- 1128 122 6802 — Old low-speed screwHistorical version · 044 configuration described in this record
- 1128 122 6800 — New low-speed screwHistorical version · 044 configuration described in this record
- 1128 120 7103 — Old standard/heated throttle shaftHistorical version · 044 configuration described in this record
- 1128 120 7100 — New standard/heated throttle shaftHistorical version · 044 configuration described in this record
- 1128 120 7104 — Old automatic-choke throttle shaftHistorical version · 044 configuration described in this record
- 1128 120 7102 — New automatic-choke throttle shaftHistorical version · 044 configuration described in this record
Historical fitment · 034S / 036 / 044
034S / 036 / 044: pump diaphragm changes inside the same kit
Pump diaphragm 1125 121 4802 changes to 1128 121 4802; carburetor parts kit 1128 007 1065 keeps its number while its contents change.
- The new pump diaphragm uses a different material; the source does not identify that material or quantify compatibility with fuel blends.
- The kit summary explicitly names 034S, 036 and 044 and includes item1 (pump diaphragm). The unmodified kit is supplied until existing stocks are exhausted, so kit number alone does not identify the installed diaphragm.
- The old diaphragm is no longer factory supplied per remark1; this differs from the retained spare status of the valve jet, screws and shafts.
- 034S is named by the source but has no exact-model catalog sheet bound here. Do not extend it to ordinary034,036QS,MS360 or other successor/variant sheets. The linked036 sheets contain this kit; the044 production serial is not a036/034S serial boundary.
- TI16/1994 is dated March 21, 1994. Historical availability and production statements are not present inventory or verified physical interchange; no successor-model applicability is inferred.
Source: TI 16/1994, p. 3 · TI 16/1994, p. 4 — Sections2.1 and2.3, pump diaphragm and kit row.
Part numbers (3)
- 1125 121 4802 — Original pump diaphragmHistorical version · Named kit configurations
- 1128 121 4802 — Revised-material pump diaphragmHistorical version · Named kit configurations
- 1128 007 1065 — Carburetor parts kitUnchanged number; changed contents · 034S / 036 / 044 as printed
Wrong number or missing part for the 044? Report a correction →