← 044/046 · MS 440/460/461

Stihl 1128 · Section K · 10 of 13 · 25 parts

Shroud, Air filter

Fits MS 440.

Parts diagrams →

Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131314151617181922021222323243456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (25)

PosPart numberDescriptionQty
1 1128 080 1624 Shroud Fitment / change note → 1
2 1128 967 1511 Model plate MS 440 1
3 1121 084 7100 Cap 1
4 1128 084 8301 Reflector foil 1
5 0000 963 0808 Bushing 3
6 1122 084 7100 Cap Fitment / change note → 1
7 9022 341 0980 Spline screw IS-M5x16 3
8 1128 120 1602 Air filter Fitment / change note → 1
9 1128 120 4101 Baffle Fitment / change note → 1
10 1128 141 8300 Slotted nut Fitment / change note → 2
11 1128 120 1603 Air filter Fitment / change note → 1
11 1128 120 1604 Air filter, fleece Fitment / change note → 1
12 1128 140 1909 Carburetor box cover Fitment / change note → 1
13 1124 140 9500 Twist lock 1
14 1122 141 4000 Slide Fitment / change note → 1
15 1128 124 3408 Filter base 1
16 1128 120 2201 Flange 1
17 1128 122 6610 Collar screw 1
18 9216 263 0700 Hexagon nut M5 → replaced by 9220 260 0701 TI 25/1994 2
19 0000 140 4402 Air filter HD2 Fitment / change note → 1
20 0000 124 0800 Filter insert Fitment / change note → 1
21 0000 141 0300 Prefilter Fitment / change note → 1
22 1128 140 1003 Filter cover 1
23 1124 121 9100 Bushing 1
24 0000 967 1593 Model plate Magnum 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · MS 440

MS 440 introduction: revised split-filter intake parts

TI 06/2001 identifies a coordinated intake revision at the 044-to-MS 440 transition.

  • These are the new MS 440 split-filter components, not an HD/HD2 filter kit.
  • The source retains predecessor filter parts for older machines. No blanket conversion of an older 044 by swapping individual filter halves is established.
  • The two outer filters listed are alternatives (standard and fleece), not two halves to install together.
  • Introduction is in progress without a numeric serial cutoff; retained edition is english / USA. Historical factory-availability remarks are not current stock information.
  • The TI states MS440 output of 4.0 kW, up 0.2 kW from 044 at 3.8 kW through improved intake flow. Power chronology remains unresolved: TI44/2000 already prints 4.0 kW for uprated 044 variants. Preserve market/version uncertainty; no universal power-change date or measured repair gain is established.
  • Drawing 175TI000 KN labels outer filter half (1), baffle (2), and inner half (3); these are not summary item numbers. The carburetor box cover is also revised. No machining dimensions or modification procedure for the old intake are supplied.
  • Summary item 12, the baffle, includes item 13, the slotted nut; item 16, the carburetor box cover, includes item 17, the shutter. All rows 11–17 carry remark 2: previous versions remain available for older machines. These predecessor numbers are reference matches, not permission to mix the revised assembly with old parts.
  • Inner filter half: previous 1128 120 1625 → new 1128 120 1602, within the documented split-filter intake transition.
  • Baffle: previous 1128 120 4100 → new 1128 120 4101, within the documented split-filter intake transition.
  • Slotted nut: previous 1124 141 8300 → new 1128 141 8300, within the documented split-filter intake transition.
  • Outer filter half: previous 1128 120 1610 → new 1128 120 1603, within the documented split-filter intake transition.
  • Fleece outer filter half: previous 1128 120 1605 → new 1128 120 1604, within the documented split-filter intake transition.
  • Carburetor box cover: previous 1128 140 1905 → new 1128 140 1909, within the documented split-filter intake transition.
  • Shutter: previous 1128 141 4001 → new 1122 141 4000, within the documented split-filter intake transition.

Source: TI 6/2001, p. 1 · TI 6/2001, p. 2 · TI 6/2001, p. 3 · TI 6/2001, p. 4 — Complete sections 1–9: 044/MS440 naming and power chronology, split-filter intake, cap operation, matching assemblies, vent construction/function, main bearing, clutch and all 17 summary rows.

Part numbers (14)
  • 1128 120 1602 — Inner filter halfMS 440 introduction · MS 440 split-filter arrangement
  • 1128 120 4101 — BaffleMS 440 introduction · MS 440 split-filter arrangement
  • 1128 141 8300 — Slotted nutMS 440 introduction · MS 440 baffle
  • 1128 120 1603 — Outer filter halfStandard option · MS 440 split-filter arrangement
  • 1128 120 1604 — Fleece outer filter halfFleece option · MS 440 split-filter arrangement
  • 1128 140 1909 — Carburetor box coverMS 440 introduction · MS 440 split-filter arrangement
  • 1122 141 4000 — ShutterMS 440 introduction · MS 440 revised cover
  • 1128 120 1625 — Inner filter halfPrevious version retained for older machines · 044 predecessor reference; not the new MS 440 component
  • 1128 120 4100 — BafflePrevious version retained for older machines · 044 predecessor reference; not the new MS 440 component
  • 1124 141 8300 — Slotted nutPrevious version retained for older machines · 044 predecessor reference; not the new MS 440 component
  • 1128 120 1610 — Outer filter halfPrevious version retained for older machines · 044 predecessor reference; not the new MS 440 component
  • 1128 120 1605 — Fleece outer filter halfPrevious version retained for older machines · 044 predecessor reference; not the new MS 440 component
  • 1128 140 1905 — Carburetor box coverPrevious version retained for older machines · 044 predecessor reference; not the new MS 440 component
  • 1128 141 4001 — ShutterPrevious version retained for older machines · 044 predecessor reference; not the new MS 440 component

Conditional replacement · MS 440

MS 440: shroud opening cap and separate dirt cover

The shroud cap and cylinder sealing plug serve different holes.

  • Shroud 1128 080 1624 replaces 1128 080 1605. Its valve opening has a raised molded edge to reduce accidental valve operation. The previous shroud is supplied only while factory stocks last.
  • On machines without a decompression valve, close the shroud opening with provided cap 1122 084 7100. This shroud cap is not the cylinder sealing plug 1122 025 2200; non-decompression configurations need their respective openings closed as described.
  • Cover 1122 084 1405 fits between cylinder and shroud to prevent dirt ingress; the illustration shows its position around the upper cylinder/valve area. It is distinct from both the shroud cap and the cylinder plug. Introduction is in progress without a numerical serial cutoff.
  • The named model scope is not extended to other models sharing series 1128 or later IPL sheets. Factory supply statements are historical, not current stock. No physical interchange test was performed.

Source: TI 28/2002, p. 2 · TI 28/2002, p. 3 — Sections 3–4, cap/cover diagrams and summary rows 5–8/remark 1.

Part numbers (5)
  • 1128 080 1605 — ShroudPrevious; stocks only · Only the named model and configuration; see conditions
  • 1128 080 1624 — ShroudNew; includes cap · Only the named model and configuration; see conditions
  • 1122 084 7100 — Shroud opening capNon-decompression configuration · Only the named model and configuration; see conditions
  • 1122 084 1405 — Dirt coverBetween cylinder and shroud · Only the named model and configuration; see conditions
  • 1122 025 2200 — Cylinder plugSeparate cylinder sealing function · Only the named model and configuration; see conditions

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

MS 440 / MS 460 / MS 650 / MS 660 / MS 880: HD2 retrofit

HD2 replaces HD and is used WITHOUT the old prefilter.

  • Exact cover scope: MS440/MS460 series1128, MS650/MS660 series1122 and MS880 series1124. Previous HD air filter 0000 120 1654 with prefilter 0000 141 0300 is replaced by HD2 0000 140 4402. HD2 has a black frame and pleated filter material; the illustration distinguishes old filter and wraparound prefilter from new HD2.
  • HD2 can also be used on older machines in this named scope. Use HD2 WITHOUT a prefilter. Prefilter 0000 141 0300 remains available for the old HD filter, NOT as a requirement for HD2. Do not confuse this prefilter with required filter insert 0000 124 0800 on equipped systems.
  • The old HD filter is no longer available from factory; summary row1 includes prefilter row2 and insert row3 in the old assembly. These inclusions must not be transferred to the new HD2 package. See separate insert note for system-dependent retention.
  • Changeover is model-by-model over the next few months in this 2010 bulletin; summary says continuously. No universal changeover date or serial is supplied, and unnamed 044/046/064/066/088 models are not silently added.
  • New material is described as oil/water repellent, sturdy, easy to clean, retaining integrity after numerous cleaning cycles and giving improved filtration especially in dust. These are historical vendor claims, not a quantified efficiency, service-life guarantee or locally reproduced test.
  • Retained 2012 IPL sheets still list the prefilter beside HD2. That catalog coexistence is not permission to install the old prefilter on HD2: this TI explicitly says WITHOUT a prefilter. Canonical IPL rows remain unchanged; the historical service restriction is shown separately.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 1 · TI 47/2010, p. 3 — MS 440 / MS 460 / MS 650 / MS 660 / MS 880: HD2 retrofit.

Part numbers (3)
  • 0000 120 1654 — HD air filterPrevious; discontinued from factory · TI47/2010 named models; preserve the stated filter-system conditions
  • 0000 141 0300 — Prefilter for HD filterRetained for old HD; omit on HD2 · TI47/2010 named models; preserve the stated filter-system conditions
  • 0000 140 4402 — HD2 air filterNew; older-machine use in named scope · TI47/2010 named models; preserve the stated filter-system conditions

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

HD2 retrofit: retain the separately ordered filter insert

Systems already using 0000 124 0800 must continue to use it.

  • Air filter systems equipped with filter insert 0000 124 0800 MUST still use that insert after switching to HD2. The source does not identify which individual model variants have it; do not require it universally or remove it from an equipped system.
  • Order insert 0000 124 0800 separately: it is NOT supplied with HD2 0000 140 4402. The insert illustration depicts a separate piece, unlike the old wraparound prefilter on page1.
  • Summary row3 retains the insert for older machines and refers to service notes; old HD summary row1 includes rows2/3. New HD2 row4 has no such inclusion. WITHOUT a prefilter means omit 0000 141 0300, not omit this required insert.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 1 · TI 47/2010, p. 2 · TI 47/2010, p. 3 — HD2 retrofit: retain the separately ordered filter insert.

Part numbers (2)
  • 0000 124 0800 — Filter insertRetain on equipped systems; order separately · TI47/2010 named models; preserve the stated filter-system conditions
  • 0000 140 4402 — HD2 air filterDoes not include the required separate insert · TI47/2010 named models; preserve the stated filter-system conditions

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

HD2 air filter: clean from inside outwards

Use non-flammable cleaner for stubborn dirt; no pressure washer or extreme heat.

  • Section1.2: knock out the air filter or blow clear with compressed air FROM INSIDE OUTWARDS. For stubborn dirt, wash in clean NON-FLAMMABLE liquid, e.g. warm soapy water, then rinse from inside to outside under a water jet.
  • DO NOT use high-pressure cleaners. Dry ALL air filter parts; DO NOT expose to extreme heat. No numerical compressed-air pressure, water pressure, drying temperature or service interval is specified.
  • This cleaning section belongs to the HD2 change; the adjacent wire-mesh accessory heading is a separate section. Do not silently generalize these instructions to every filter material.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 2 — HD2 air filter: clean from inside outwards.

No additional parts-table entry added.

Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880

Wire-mesh filter: green housing remains a special accessory

The HD-to-HD2 replacement does not delete the wire-mesh option.

  • Section2 and summary row5 retain wire-mesh air filter 0000 120 1653 as a SPECIAL ACCESSORY. The source identifies a green filter housing, distinct from the black HD2 frame.
  • No replacement of this wire-mesh filter by HD2 is stated, and no environmental-use recommendation or comparative filtering efficiency is supplied for it. Historical continued availability is not a present-stock promise.
  • Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.

Source: TI 47/2010, p. 2 · TI 47/2010, p. 3 — Wire-mesh filter: green housing remains a special accessory.

Part numbers (1)
  • 0000 120 1653 — Wire-mesh air filter, green housingRetained special accessory · TI47/2010 named models; preserve the stated filter-system conditions

Wrong number or missing part for the MS 440? Report a correction →