← 044/046 · MS 440/460/461

Stihl 1128 · Section C · 3 of 16 · 23 parts

Muffler

Fits MS 460.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220202122233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (23)

PosPart numberDescriptionQty
1 1128 140 0603 Muffler Fitment / change note → 1
2 1128 145 0803 Exhaust casing 1
3 1128 140 0609 Muffler 1
4 1128 145 0804 Exhaust casing 1
5 1118 141 9006 Screen 1
6 1128 149 0500 Gasket Fitment / change note → 1
7 1128 140 0610 Muffler 1
8 1128 145 0710 Inlet casing 1
9 1128 145 8000 Sleeve 1
10 1128 140 0616 Muffler 1
11 1128 140 0801 Exhaust casing 1
12 1128 141 9000 Screen 1
13 1128 148 4200 Bracket 1
14 9099 021 0810 Self-tapping screw 4.2x9.5 2
15 1128 140 0612 Muffler 1
16 1128 145 0805 Exhaust casing 1
17 1125 149 0601 Muffler gasket 1
18 9022 341 0910 Spline screw IS-M5x6 2
19 9022 341 0980 Spline screw IS-M5x16 2
20 9022 341 1370 Spline screw IS-M6x30 2
21 0000 148 6000 Tensioning gear 2
22 9022 341 1070 Spline screw IS-M5x30 1
23 9022 341 0910 Spline screw IS-M5x6 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 460

MS 460 muffler seal: order it separately from muffler 0603

The new seal sits between the upper and lower muffler mouldings.

  • Seal 1128 149 0500 is introduced BETWEEN THE UPPER AND LOWER MOULDINGS of muffler 1128 140 0603, as the exploded drawing shows. It is not the cylinder-to-muffler gasket or a blanket gasket application to every muffler listed on the muffler sheet.
  • The seal is NOT INCLUDED in muffler 1128 140 0603 and MUST BE ORDERED SEPARATELY. The summary lists it as a new part with no previous number; do not invent a predecessor or assume the new carburetor assembly includes the muffler seal.
  • Introduction is in progress without a numeric serial cutoff. The source gives no muffler-fastener torque, sealant requirement or replacement interval here. Preserve the exact 0603 muffler pairing rather than extending this instruction to catalytic or other muffler variants on the same catalog sheet.
  • Historical TI40/2003 English guidance for the specified MS 460 carburetor or muffler configuration; not a universal setting for every MS 460 revision or region. MS 460 C catalytic-converter conditions apply only where explicitly stated. No physical interchange test was performed.

Source: TI 40/2003, p. 4 · TI 40/2003, p. 5 — Section 2 and summary seal row complete.

Part numbers (2)
  • 1128 140 0603 — MufflerExact assembly requiring separately ordered seal · MS 460; exact historical configuration stated above
  • 1128 149 0500 — Seal between muffler mouldingsNew; not included in muffler 0603 · MS 460; exact historical configuration stated above

Wrong number or missing part for the MS 460? Report a correction →