Stihl 1128 · Section E · 5 of 16 · 39 parts
Chain brake, Chain sprocket cover
Fits MS 460.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (39)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1128 790 9152 | Hand guard | 1 |
| 2 | 1124 084 8300 | Reflector foil | 1 |
| 3 | 1124 792 5500 | Bushing | 1 |
| 4 | 1124 792 5505 | Bushing | 1 |
| 5 | 9022 341 1080 | Spline screw IS-M5x35 | 1 |
| 6 | 1128 790 9153 | Hand guard | 1 |
| 7 | 1128 084 8304 | Reflector foil | 1 |
| 8 | 1128 792 0900 | Reflector foil | 1 |
| 9 | 1128 160 5000 | Lever | 1 |
| 10 | 9460 624 0400 | E-clip 4 | 2 |
| 11 | 1121 162 5010 | Lever | 1 |
| 12 | 0000 997 0628 | Spring | 1 |
| 13 | 1128 160 5400 | Brake band | 1 |
| 14 | 1128 160 5501 | Tension spring | 1 |
| 15 | 1128 162 8000 | Hose | 1 |
| 16 | 1128 021 1102 | Cover | 1 |
| 17 | 1128 021 1105 | Cover | 1 |
| 18 | 9022 313 0660 | Spline screw IS-M4x12 | 4 |
| 20 | 1125 640 1701 | Chain sprocket cover Fitment / change note → → replaced by 1122 640 1702, 1128 640 1706 TI 36/2000 | 1 |
| 21 | 1125 656 1501 | Guard | 1 |
| 22 | 1121 648 6610 | Bumper strip | 2 |
| 23 | 1122 648 0403 | Chain sprocket cover Fitment / change note → | 1 |
| 24 | 1122 656 1510 | Guard | 1 |
| 25 | 1128 664 0501 | Bumper spike | 1 |
| 26 | 9008 319 0960 | Hexagon head screw M5x12 | 2 |
| 27 | 9214 320 0700 | Lock nut M5 | 2 |
| 28 | 1122 650 7700 | Chain catcher | 1 |
| 29 | 1122 664 0506 | Bumper spike | 1 |
| 30 | 1128 664 0500 | Bumper spike | 1 |
| 31 | 9022 341 0960 | Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 | 1 |
| 32 | 1122 656 7700 | Chain catcher | 1 |
| 33 | 9022 341 1019 | Spline screw IS-M5x20 | 1 |
| 34 | 0000 955 0801 | Hexagon nut M8 | 2 |
| 35 | 9214 320 0700 | Lock nut M5 | 1 |
| 36 | 0000 967 3714 | Instruction label ARCTIC | 1 |
| 37 | 0000 967 3612 | Instruction label | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1128 640 1707 | Chain sprocket cover Fitment / change note → | 1 |
| — | 1128 640 1707 | Chain sprocket cover Fitment / change note → option | 1 |
| — | 1128 640 1708 | Chain sprocket cover Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · MS 460
MS 460: collar screws determine cover compatibility
Old covers without countersunk holes must not be used with new collar screws 1138 664 2400. New countersunk covers accept either collar screw type.
- Old covers without countersunk holes must not be used with new collar screws 1138 664 2400. New countersunk covers accept either collar screw type.
- Crankcase 1128 020 2123 with old screws remains a historical service option for older covers; 1128 020 2137 includes new screws.
- Wrap-around handlebars require the cover with an extended outward-projecting lower section; a countersink alone does not establish wrap-handle suitability.
- When fitting a new cover, replace the lugged side plate with the lug-free version and its specified screw; see the linked sheet note.
- This is a configuration rule, not permission to machine an old cover or infer an unrestricted 044/046 crankcase swap.
- Retained edition: English USA. Introduction is continuous, with no numeric serial cutoff. Historical availability is not current stock or universal regional applicability.
Source: TI 15/2007, p. 1 · TI 15/2007, p. 2 · TI 15/2007, p. 3 · TI 15/2007, p. 4 · TI 15/2007, p. 8 — Sections 1.1–1.3 and summary: model-specific cases/covers, compatibility matrix.
Part numbers (12)
- 1128 020 2123 — CrankcasePrevious version · MS 460; old collar screws
- 1128 020 2137 — CrankcaseRevised version · MS 460; new collar screws
- 0000 953 6605 — Collar screwPrevious version · Old or countersunk covers
- 1138 664 2400 — Collar screwNew version · Countersunk covers only
- 1125 640 1701 — Chain sprocket coverPrevious standard cover · Old collar screws only
- 1128 640 1706 — Chain sprocket coverNew standard cover · Either collar screw type; side-plate change required
- 1122 648 0401 — Wrap-handle sprocket coverPrevious wrap cover · Old collar screws only
- 1122 648 0403 — Wrap-handle sprocket coverNew wrap cover · Either collar screw type; extended lower section
- 1128 640 1701 — Cover with spike and catcherPrevious assembly · Old collar screws only
- 1128 640 1707 — Cover with spike and catcherNew assembly · Either collar screw type
- 1128 640 1700 — Wrap cover with spike and catcherPrevious assembly · Old collar screws only
- 1128 640 1708 — Wrap cover with spike and catcherNew assembly · Either collar screw type; includes 1122 648 0403
Conditional replacement · MS 440 / MS 460
MS 440 / MS 460: countersunk cover requires the lug-free side plate
When a countersunk sprocket cover is fitted, replace lugged side plate 1128 664 1002 with lug-free 1128 664 1001 and M4x8 screw 9041 216 0630.
- When a countersunk sprocket cover is fitted, replace lugged side plate 1128 664 1002 with lug-free 1128 664 1001 and M4x8 screw 9041 216 0630.
- The new cover has no cut-outs for retaining lugs; the old lugged plate cannot be used with it.
- The older cover remains a historical option for older machines without a wrap-around handlebar; do not erase the wrap-handle cover requirement.
- Retained edition: English USA. Introduction is continuous, with no numeric serial cutoff. Historical availability is not current stock or universal regional applicability.
Source: TI 15/2007, p. 1 · TI 15/2007, p. 3 · TI 15/2007, p. 4 — Sections 1.2.3 and 1.3: cover/side-plate pairing.
Part numbers (3)
- 1128 664 1002 — Side plate with retaining lugsIncompatible with new cover · Previous cover with cut-outs only
- 1128 664 1001 — Side plate without retaining lugsRequired replacement · Countersunk cover
- 9041 216 0630 — Screw M4x8Required matching fastener · Lug-free side plate
Wrong number or missing part for the MS 460? Report a correction →