← 044/046 · MS 440/460/461

Stihl 1128 · Section J · 9 of 16 · 31 parts

Tank housing

Fits MS 460.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220212223242526272829330456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (31)

PosPart numberDescriptionQty
1 1128 350 0845 Tank housing 1
2 1128 122 6603 Collar screw 2
3 1128 358 7703 Hose 1
4 0000 350 5800 Tank vent Fitment / change note → → replaced by 0000 350 5804 TI 41/2003 1
5 not sold separately O-ring not available as a separate item 1
6 1128 656 1500 Guard 1
7 9099 021 2770 Self-tapping screw 3.9x13 1
8 0000 967 3662 Warning pictogram MS 1
9 1128 180 0910 Switch shaft 1
10 0000 997 0227 Compression spring 1
11 1128 182 1700 Slide control 1
12 1128 180 3501 Switch housing 1
13 1128 442 1600 Contact spring 1
14 1128 442 1601 Contact spring 1
15 9099 021 1760 Self-tapping screw 2.9x9.5 1
16 0000 350 3504 Pickup body 1
17 0000 350 0525 Filler cap Fitment / change note → 1
18 9645 948 7734 O-ring 25x3.5 1
19 1128 182 1005 Throttle trigger 1
20 1128 182 1500 Throttle rod 1
21 1117 182 4500 Torsion spring 1
22 9371 470 2640 Cylindrical pin 5x24 1
23 1117 182 0805 Lockout lever 1
24 1128 791 0600 Handle molding 1
25 9074 478 3076 Pan head self-tapping screw IS-P4x19 1
26 0000 967 3605 Warning pictogram Filler cap 1
27 0000 967 3500 NLA Instruction label 1
27 0000 967 3685 Instruction label not illustrated 1
28 0000 967 3405 Instruction label no longer available from factory 1
29 1128 124 2802 NLA Filter option 1
30 0000 967 4056 Warning Spark arresting screen 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 046 / MS 460

046 repair / MS 460 transition: tank housing and matching cap

The revised tank housing uses a different filler opening; TI 05/2001 allows the housing-and-cap combination for 046 repairs.

  • Tank housing 1128 350 0822 → 1128 350 0833. The new housing is matched to cap 0000 350 0525 and includes the new vent configuration.
  • This is not a cap-only retrofit: the filler opening is modified. Do not fit the new cap alone to the old tank opening.
  • The source says the new cap would be supplied with replacement tanks for about three years, enabling 046 repairs. That historical packaging period is not a current kit-content guarantee.
  • Old cap 0000 350 0520 remains available for older machines in the source. Introduction is in progress; no serial cutoff is stated.
  • Retained edition is english / USA. This record does not prove every regional or equipment variant.
  • Section 1 renames 046 as STIHL MS 460 within the new naming structure (TI25/2000); the new nameplate stays on the shroud. This naming history is not a universal parts-interchange approval or a serial-identification range.
  • The tool-free cap has a grip for operation and is the same type for fuel and oil. To open, raise the grip upright, turn about one-quarter turn counterclockwise, and remove. To close, fit with grip upright and the cap/opening marks aligned, turn about one-quarter turn clockwise to the stop, then fold the grip down. The closing check is that the grip’s lug engages the recess; merely folding the grip down is not the stated check. Drawings 176TI001–004 KN show this sequence for the matching opening.
  • Summary item 1 includes items 2–5: filler cap and vent with its valve/filter contents. The nested contents are not additional separately orderable new vent internals. Remark 1 marks the previous housing no longer available from the factory at the time of this TI; remark 2 preserves the previous cap for older machines. Neither is a current stock statement.

Source: TI 5/2001, p. 1 · TI 5/2001, p. 2 · TI 5/2001, p. 3 · TI 5/2001, p. 4 — Complete sections 1–7: 046/MS460 naming, cap operation, tank and crankcase matching assemblies, vent construction/function, clutch and all summary rows.

Part numbers (5)
  • 1128 350 0822 — Tank housingPrevious version · 046 previous tank configuration
  • 1128 350 0833 — Tank housingNew matching assembly · MS 460 transition; 046 repair with matching cap
  • 0000 350 0520 — Filler capPrevious configuration · Older tank opening
  • 0000 350 0525 — Filler capRequired matching cap · New tank opening only
  • 0000 350 5800 — Tank ventNew tank configuration · MS 460 revised tank assembly

Conditional replacement · MS 460

MS 460 transition: integrated vent, no separate new valve/filter numbers

The revised tank uses vent 0000 350 5800; the older vent components remain separately identified for older machines.

  • Tank vent 1128 350 5802 → 0000 350 5800 in the revised MS 460 tank configuration.
  • 1110 353 1600 and 1122 358 1800 are the previous valve and filter, not new separately orderable internals for 0000 350 5800.
  • The new valve/filter versions are marked unavailable separately. Old vent, valve and filter remain available for older machines in this historical source.
  • This transition note does not erase the earlier dome-dependent 046 retrofit conditions or prove a vent-only retrofit to every old tank.
  • Construction drawing 176TI005 KN labels the perforated sheet/diaphragm (1), air-side filter (2), tank-side filter (3), and integral protective cap (4). These are local drawing labels, not summary-table item numbers. The exploded illustration explains construction; it does not make the new internals separately serviceable or orderable.
  • Function drawings 176TI006/007 KN use different local labels: air side (1), fuel-tank side (2), diaphragm (3), valve plate (4). With equal pressures, the spring presses the diaphragm against the plate and closes the valve. Fuel withdrawal initially creates a vacuum, lifting the diaphragm from the plate so air enters the tank. The valve closes again when pressures equalize.
  • This is a qualitative inlet-vent explanation, not an overpressure-relief specification or a pressure/vacuum test procedure. No opening-pressure threshold, leak limit or disassembly/repair procedure is supplied. Summary item 3 includes items 4 and 5; the new valve and filter are marked -*- and unavailable separately, not assigned the old component numbers.
  • Introduction is in progress without a numeric serial cutoff; retained edition is english / USA. Existing dome-dependent older 046 conditions remain controlling.

Source: TI 5/2001, p. 1 · TI 5/2001, p. 2 · TI 5/2001, p. 3 · TI 5/2001, p. 4 — Complete sections 1–7: 046/MS460 naming, cap operation, tank and crankcase matching assemblies, vent construction/function, clutch and all summary rows.

Part numbers (4)
  • 1128 350 5802 — Tank ventPrevious version · Previous tank configuration
  • 0000 350 5800 — Integrated tank ventNew version · Revised MS 460 tank configuration
  • 1110 353 1600 — ValvePrevious vent component · Older vent only; not a new vent service part
  • 1122 358 1800 — FilterPrevious vent component · Older vent only; not a new vent service part

Wrong number or missing part for the MS 460? Report a correction →