Stihl 1130 · Section E · 5 of 10 · 17 parts
Quick chain tensioner
Fits 017.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (17)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1123 640 1700 NLA | Chain sprocket cover | 1 |
| 2 | 1123 648 3800 NLA | Cover plate | 1 |
| 3 | 1123 648 2202 NLA | Adjusting wheel | 1 |
| 4 | 9104 003 8600 NLA | Self-tapping screw P3x10 | 1 |
| 5 | 1121 660 1000 | Wing nut | 1 |
| 6 | not sold separately | Torsion spring not available as a separate item | 1 |
| 7 | not sold separately | Cap not available as a separate item | 1 |
| 8 | not sold separately | Handle not available as a separate item | 1 |
| 9 | not sold separately | Cylindrical pin 3m6x26 not available as a separate item | 2 |
| 10 | 1123 664 2402 NLA | Collar screw | 1 |
| 11 | 1123 660 3001 NLA | Tensioning gear | 1 |
| 12 | 9041 319 0600 NLA | Pan head screw M4x5 | 1 |
| 13 | 1123 664 0501 | Bumper spike | 1 |
| 14 | 9075 478 4115 | Pan head self-tapping screw IS-D5x16 | 2 |
| 15 | 1123 021 2800 | Insert | 1 |
| 16 | 0812 370 1000 | Screwdriver T27x120x70 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1123 007 1008 NLA | Quick tensioner parts Fitment / change note → option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 017
017 Picco Mini / PMN: 1.2-kW ceiling and 1.1-mm gauge
PMN and PM share 3/8-inch pitch but differ in gauge, kerf and depth-gauge setting.
- Picco Mini cutting attachments MUST NOT be used on machines with engine power MORE THAN 1.2 kW (1.6 bhp). This is an attachment power ceiling, not the 017 output of 1.1 kW. Compatibility below the ceiling is not universal fitment approval.
- The TI permits Picco Mini and Picco Micro bar/chain with optional quick chain tensioning system 1123 007 1008 on the described saw. Do not mix incompatible bar-groove/drive-link gauges just because both pitches are 3/8 inch.
- PMN means Picco Micro Mini, N = narrow; developed from PM Picco Micro. PM cutters and PMN cutters are distinct in the figures; the extracted captions “30” and “301” are corrupt. PMN cutters are marked PN; drive links stamped 1 denote 1.1-mm (0.043-in) gauge.
- Comparison PM versus PMN: pitch 3/8 inch for both; drive-link gauge 1.3 mm (0.050 in) versus 1.1 mm (0.043 in); depth-gauge setting 0.65 mm (0.025 in) versus 0.45 mm (0.018 in); kerf 6.4 mm (0.25 in) versus 5.4 mm (0.21 in); source cutting-performance index 100% versus 108%. Gauge, kerf and depth-gauge setting are different measurements.
- The source claims 16% narrower kerf, higher capacity, 30% lower attachment weight, reduced cutting noise and sensitivity to feed-pressure variation, and enhanced safety from a 7-tooth nose and offset/bent-over depth gauges. These are historical comparative claims, not new measurements or immunity to kickback.
- Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.
Source: TI 23/1995, p. 4 — Section 4.4 and 4.4.1, PM/PMN comparison and cutter figures.
Part numbers (1)
- 1123 007 1008 — Quick chain tensioning systemoptional; PM or PMN attachment as specified · 017; Section 4.4 and 4.4.1, PM/PMN comparison and cutter figures
Service note · 017
017 PMN sharpening, replacement links and NG3 concave riveting
Use the 0.45-mm filing gauge; adjust the NG3 anvil for the narrower chain.
- Figure 135TI017 contrasts conventional CONVEX rivet heads at left with new CONCAVE PMN heads at right. The TI attributes lower friction/vibration and easier breaking-punch centering to concave heads; these are source claims.
- PMN sharpening angles follow PM; the DIFFERENT DEPTH-GAUGE SETTING is 0.45 mm (0.018 in), using modified filing gauge 0000 893 4000. No numeric sharpening angles are printed here.
- Use PM setting data on USG and clamping rails for 1.3-mm (0.050-in) chain also for PMN. This is a TOOLING allowance, not permission to fit 1.1-mm PMN chain in an incompatible bar. Same dies/punches as PM may be used for repairs (examples NG4/NG5); a few convex heads do not interfere with smooth running, according to the TI.
- NG3 complete PMN spinning head 5804 750 5726 includes roller 5804 757 7805 and head WITHOUT roller 5804 757 7615. Complete PMN anvil 5804 750 6731 includes anvil 5804 757 8506. The anvil MUST BE ADJUSTED for the narrower chain; no numeric anvil setting is supplied.
- The US green-label tie strap is separately identified; no assembly counts, purchase minima or present availability are supplied. The chain remains subject to the 1.2-kW ceiling from the preceding page.
- Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.
Source: TI 23/1995, p. 5 — Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling.
Part numbers (12)
- 3987 662 0400 — PMN right-hand cutterchain replacement part · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 3987 662 0600 — PMN left-hand cutterchain replacement part · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 3987 660 6600 — PMN preset tie strapchain replacement part · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 3987 662 1200 — PMN tie strapchain replacement part · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 3987 662 1203 — PMN green-label tie strapfor US · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 3987 662 1000 — PMN drive link1.1-mm chain · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 0000 893 4000 — PMN filing gauge0.45-mm depth-gauge setting · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 5804 750 5726 — PMN spinning head completeNG3; includes roller and head · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 5804 757 7805 — Spinning rollerincluded in complete spinning head · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 5804 757 7615 — Spinning head without rollerincluded in complete spinning head · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 5804 750 6731 — PMN anvil completeNG3; adjust for narrow chain · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
- 5804 757 8506 — Anvilincluded in complete anvil · 017; Section 4.4.1 continuation, replacement parts, filing/repair and NG3 tooling
Service note · 017
017 Rollomatic Mini bars and alternative 63PM attachment
Mini nose has seven teeth and is not replaceable; alternative Rollomatic nose has nine.
- Rollomatic Mini thickness 3.2 mm (0.126 in), stated 0.7 mm (0.03 in) thinner than the standard bar; groove width 1.1 mm (0.043 in). Seven-tooth nose sprocket secured by ONE CENTRAL RIVET and NOT REPLACEABLE. The source “world’s first” claim is historical marketing, not independently established.
- Mini 3/8 P, 7-tooth nose: 30 cm (12 in) 3005 000 4105; 35 cm (14 in) 3005 000 4109. Apply the preceding 1.2-kW power ceiling and PMN 1.1-mm gauge; these are not 1.3-mm PM bars.
- Other attachment combination: chain type 3876, designation 63PM; Rollomatic 3/8 P, 9-tooth nose, 30 cm (12 in) 3005 000 4805 or 35 cm (14 in) 3005 000 4809. PM gauge is 1.3 mm in the preceding comparison. No drive-link counts are supplied; bar length alone does not establish chain-loop length.
- Seven or nine NOSE teeth must not be confused with the SIX-tooth POWERHEAD drive sprocket specified separately. This TI does not establish bar fitment on every 3005-mount saw or a cross-model conversion.
- Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.
Source: TI 23/1995, p. 4 · TI 23/1995, p. 6 — Sections 4.4, 4.4.2 and 4.4.5.
Part numbers (4)
- 3005 000 4105 — Rollomatic Mini 30 cm / 12 in3/8 P; 7-tooth nose; 1.1-mm groove · 017; Sections 4.4, 4.4.2 and 4.4.5
- 3005 000 4109 — Rollomatic Mini 35 cm / 14 in3/8 P; 7-tooth nose; 1.1-mm groove · 017; Sections 4.4, 4.4.2 and 4.4.5
- 3005 000 4805 — Rollomatic 30 cm / 12 inalternative 63PM; 3/8 P; 9-tooth nose · 017; Sections 4.4, 4.4.2 and 4.4.5
- 3005 000 4809 — Rollomatic 35 cm / 14 inalternative 63PM; 3/8 P; 9-tooth nose · 017; Sections 4.4, 4.4.2 and 4.4.5
Service note · 017
017 standard accessories and optional repair kits
Screwdriver availability is market-qualified; kit contents are not listed.
- Standard accessories: screwdriver 0000 890 2300, combination wrench 1123 893 3400 and chain scabbard 0000 792 9128. The asterisk NOT IN ALL MARKETS applies to the SCREWDRIVER; do not silently make it universal or apply the note to all accessories.
- Special user accessories: STIHL repair kit 1130 900 5000, filing gauge 0000 893 4000 and quick chain tensioner 1123 007 1008. Special SERVICE accessory: carburetor parts kit 1130 007 1060. User repair kit and service carburetor kit are not interchangeable names or a list of supplied internal parts.
- Later 017 K sheet key 13 has combination wrench 1129 890 3401, different from TI 1123 893 3400. This is a catalog difference, not an established supersession. The 017 E sheet retains 1123 007 1008 and marks it NLA; that later flag is not proof of present availability or absence in 1995.
- Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.
Source: TI 23/1995, p. 8 — Sections 4.8 and 4.9, including asterisk restriction.
Part numbers (7)
- 0000 890 2300 — Screwdriverstandard; not all markets · 017; Sections 4.8 and 4.9, including asterisk restriction
- 1123 893 3400 — Combination wrenchstandard TI version · 017; Sections 4.8 and 4.9, including asterisk restriction
- 0000 792 9128 — Chain scabbardstandard · 017; Sections 4.8 and 4.9, including asterisk restriction
- 1130 900 5000 — STIHL repair kitspecial user accessory; contents unspecified · 017; Sections 4.8 and 4.9, including asterisk restriction
- 0000 893 4000 — Filing gaugespecial user accessory; PMN setting · 017; Sections 4.8 and 4.9, including asterisk restriction
- 1123 007 1008 — Quick chain tensionerspecial user accessory · 017; Sections 4.8 and 4.9, including asterisk restriction
- 1130 007 1060 — Carburetor parts kitspecial service accessory; contents unspecified · 017; Sections 4.8 and 4.9, including asterisk restriction
Wrong number or missing part for the 017? Report a correction →