Stihl 1130 · Section F · 6 of 10 · 22 parts
Air filter, Shroud
Fits 017.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (22)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1130 140 2803 | Filter housing | 1 |
| 2 | 1130 141 1101 | Insert | 1 |
| 3 | 1130 140 2800 | Filter housing Fitment / change note → | 1 |
| 4 | 1130 141 1100 | Insert | 1 |
| 5 | 1130 141 4300 | Packing | 1 |
| 6 | 1130 124 7100 | Sleeve Fitment / change note → | 1 |
| 7 | 1130 124 0800 | Filter plate | 1 |
| 8 | 9216 261 0700 | Hexagon nut M5 | 2 |
| 9 | 1130 140 4709 | Shroud | 1 |
| 10 | 1130 141 2300 | Twist lock | 1 |
| 11 | 1130 141 1801 | Sleeve Fitment / change note → | 1 |
| 12 | 1130 084 8300 | Reflector foil | 1 |
| 13 | 0000 967 3692 | Warning pictogram Filler cap | 1 |
| 14 | 1130 141 1800 | Sleeve | 1 |
| 15 | 1130 022 2000 | Ring | 1 |
| 16 | 1130 141 2200 | Manifold | 1 |
| 17 | 1130 120 0603 | Carburetor C1Q-S57C | 1 |
| 18 | 1130 120 0601 | Carburetor C1Q-S43B → replaced by 1130 120 0603 TI 49/2000 | 1 |
| 19 | 1130 120 0600 | Carburetor WT-325A → replaced by 1130 120 0601 TI 5/2000 | 1 |
| 20 | 1122 442 1603 | Contact spring | 1 |
| 21 | 1130 182 0900 | Switch shaft | 1 |
| 22 | 1130 185 2000 | Choke rod | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 017
017 introduction: fixed jet, spark screen and tool-free shroud
Original 1995 equipment includes AV handles and an inertia-tripped chain brake.
- The compact lightweight entry-level saw is described for homeowners/DIY cutting around house and garden. Reliability, ease of use, ergonomics, favorable price and matched cutting attachment are source descriptions, not measured present-day performance.
- Equipment: AV handle system, electronic magneto ignition, inertia-tripped chain brake and exhaust spark-arresting screen. The muffler screen is specified in ALL MARKETS; the exploded figure shows the screen between muffler body and cover, not an optional US-only item.
- The carburetor has a FIXED JET and NO HIGH-SPEED SCREW. The central shroud can be removed WITHOUT TOOLS. The figures give component layout, not an undisclosed part number, carburetor maker/type or conversion procedure.
- The TI attributes meeting US CARB emissions standards to the fixed-jet carburetor and engine tuning. This is a historical source claim, not verification of current emissions compliance or permission to modify emissions equipment.
- Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.
Source: TI 23/1995, p. 1 · TI 23/1995, p. 2 — Sections 1–3, overview and figures 143TI001–003.
No additional parts-table entry added.
Service note · 017
017 fuel, fixed-jet setting and leakage-test pressures
Low-speed screw one turn open; no adjustable high-speed screw or numeric maximum rpm supplied.
- All-position diaphragm carburetor with integral fuel pump and fixed main jet; NO HIGH-SPEED SCREW. Main jet is NOT ADJUSTABLE and the TI says maximum engine speed is permanently set by it; no numeric maximum engine speed or adjustable H setting is supplied. Standard LOW-SPEED SCREW setting is ONE TURN OPEN.
- Crankcase leakage test: gauge pressure 0.4 bar (5.8 psi); vacuum magnitude 0.4 bar (5.8 psi). Carburetor leakage test: gauge pressure 0.4 bar (5.8 psi). Vacuum is not a second positive pressure. The page does not supply a hold time, allowable decay or full test procedure.
- Fuel tank capacity 0.25 l (0.53 US pt). Regular brand-name gasoline and two-stroke engine oil; USA/CAN minimum pump octane 89 UNLEADED; 50:1 with STIHL 50:1 two-stroke oil. Do not relabel pump octane as RON or generalize the named-oil ratio to unlisted oils.
- Flat felt-mat air filter. Later 017 F sheet lists several carburetors (C1Q-S57C, C1Q-S43B and WT-325A); TI23 names none. These later catalog choices are not proof that all share this 1995 adjustment specification.
- Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.
Source: TI 23/1995, p. 3 — Sections 4.1 crankcase tests and 4.2 fuel system.
No additional parts-table entry added.
Historical fitment · 017
017: filter-housing lug gains its own sleeve
Filter housing 1130 140 2800 includes sleeve 1130 124 7100; the old housing remains available only while factory stocks last.
- The filter-housing lug was modified and a sleeve fitted over it to improve shroud security. Figure 143TI000 KN points to this lug sleeve, not the separate shroud mounting sleeve.
- The filter housing changes from 1130 124 3500 to 1130 140 2800. The new housing includes item 2, sleeve 1130 124 7100. The sleeve has a dash in the original-version column; this is not a claim that the old housing can accept it.
- First-table remark 1 applies to the filter housing: the original version is supplied from the factory only until existing stocks are exhausted. The table says all other parts as before. This differs from the modified-only shroud and fan-housing remarks.
- The later 01-2012 exact 017 air-filter/shroud sheet lists housing 1130 140 2800 at position 3 and sleeve 1130 124 7100 at position 6; it also lists housing 1130 140 2803 at position 1. TI46 does not establish a 2800-to-2803 supersession. The missing old 3500 row does not erase the historical number.
- TI 46/1998 names Model 017, series 1130 only. Shared part numbers in 018 or MS 170/MS 180 catalogs do not extend this historical change to those models. Both modification introductions are in progress, with no serial cutoff. Factory availability statements describe 1998, not current stock; no physical interchange or retrofit procedure is established.
Source: TI 46/1998, p. 1 · TI 46/1998, p. 2 — Page1 section1 filter-housing paragraphs and figure143TI000 KN; page2 first summary items1–2, remark1 and introduction line.
Part numbers (3)
- 1130 124 3500 — Original filter housing; first table item1Original version; factory supply until stocks exhausted · 017; TI 46/1998 only
- 1130 140 2800 — Modified filter housing; first table item1New number; includes item2 · 017; TI 46/1998 only
- 1130 124 7100 — Filter-housing lug sleeve; first table item2Included in new filter housing · 017; TI 46/1998 only
Historical fitment · 017
017: shroud mounting sleeve and gunning sight
Shroud 1130 140 4700 keeps its number despite a changed front-left mounting and added gunning sight.
- The front-left shroud mounting was modified to take sleeve 1130 141 1801. Figure 143TI013 KN shows the mounting arrow and a separate arrow at the applied gunning sight. The shroud number remains 1130 140 4700; the number alone does not distinguish original and modified versions.
- The first summary repeats 1130 140 4700 in both version columns and says the shroud includes item 4, sleeve 1130 141 1801. Remark 2 says only the modified shroud version is available from the factory.
- The shroud sleeve 1130 141 1801 is distinct from filter-housing lug sleeve 1130 124 7100. The later exact 017 sheet separately lists manifold-side sleeve 1130 141 1800 at position 14; neither a similar name nor an adjacent number establishes interchange.
- The later 01-2012 exact 017 sheet lists sleeve 1130 141 1801 at position 11 but shroud 1130 140 4709 at position 9, not historical 1130 140 4700. Preserve the dated catalog difference; this TI provides no 4700-to-4709 replacement rule or change date.
- TI 46/1998 names Model 017, series 1130 only. Shared part numbers in 018 or MS 170/MS 180 catalogs do not extend this historical change to those models. Both modification introductions are in progress, with no serial cutoff. Factory availability statements describe 1998, not current stock; no physical interchange or retrofit procedure is established.
Source: TI 46/1998, p. 1 · TI 46/1998, p. 2 — Page1 section1 shroud paragraph and both arrows in143TI013 KN; page2 first summary items3–4 and remark2.
Part numbers (2)
- 1130 140 4700 — Original and modified shroud; first table item3Unchanged number; modified-only factory supply; includes item4 · 017; TI 46/1998 only
- 1130 141 1801 — Shroud mounting sleeve; first table item4Included in modified shroud; not the filter-housing sleeve · 017; TI 46/1998 only
Wrong number or missing part for the 017? Report a correction →