← 017/018 · MS 170/180

Stihl 1130 · Section K · 10 of 10 · 19 parts

Handle frame, Tools

Fits 017.

Parts diagrams →

Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151617220213456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (19)

PosPart numberDescriptionQty
1 1130 791 4901 Handle frame 1
2 1130 182 1502 Throttle rod 1
3 1123 791 2800 Annular buffer 1
4 1123 791 7305 Plug 1
5 1123 791 7300 Plug 1
6 1130 182 0800 Lockout lever 1
7 1130 182 1000 Throttle trigger 1
8 1117 182 4500 Torsion spring 1
9 1130 791 0601 Handle molding 1
10 9074 478 3075 Pan head self-tapping screw IS-P4x19 2
11 0000 967 3632 Warning pictogram MS 1
12 0000 967 3500 NLA Instruction label 1
13 1129 890 3401 Combination wrench 1
14 0000 792 9128 Chain scabbard Fitment / change note → 1
15 0000 890 2300 NLA Screwdriver Fitment / change note → 1
16 0000 890 2305 Screwdriver 1
17 0812 370 1000 Screwdriver T27x120x70 option 1
20 1130 791 0600 Handle molding 1
21 1130 791 4900 Handle frame → replaced by 1130 791 4901 TI 5/2000 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 017

017 standard accessories and optional repair kits

Screwdriver availability is market-qualified; kit contents are not listed.

  • Standard accessories: screwdriver 0000 890 2300, combination wrench 1123 893 3400 and chain scabbard 0000 792 9128. The asterisk NOT IN ALL MARKETS applies to the SCREWDRIVER; do not silently make it universal or apply the note to all accessories.
  • Special user accessories: STIHL repair kit 1130 900 5000, filing gauge 0000 893 4000 and quick chain tensioner 1123 007 1008. Special SERVICE accessory: carburetor parts kit 1130 007 1060. User repair kit and service carburetor kit are not interchangeable names or a list of supplied internal parts.
  • Later 017 K sheet key 13 has combination wrench 1129 890 3401, different from TI 1123 893 3400. This is a catalog difference, not an established supersession. The 017 E sheet retains 1123 007 1008 and marks it NLA; that later flag is not proof of present availability or absence in 1995.
  • Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.

Source: TI 23/1995, p. 8 — Sections 4.8 and 4.9, including asterisk restriction.

Part numbers (7)
  • 0000 890 2300 — Screwdriverstandard; not all markets · 017; Sections 4.8 and 4.9, including asterisk restriction
  • 1123 893 3400 — Combination wrenchstandard TI version · 017; Sections 4.8 and 4.9, including asterisk restriction
  • 0000 792 9128 — Chain scabbardstandard · 017; Sections 4.8 and 4.9, including asterisk restriction
  • 1130 900 5000 — STIHL repair kitspecial user accessory; contents unspecified · 017; Sections 4.8 and 4.9, including asterisk restriction
  • 0000 893 4000 — Filing gaugespecial user accessory; PMN setting · 017; Sections 4.8 and 4.9, including asterisk restriction
  • 1123 007 1008 — Quick chain tensionerspecial user accessory · 017; Sections 4.8 and 4.9, including asterisk restriction
  • 1130 007 1060 — Carburetor parts kitspecial service accessory; contents unspecified · 017; Sections 4.8 and 4.9, including asterisk restriction

Service note · 017

017 piston, ignition, clutch and holding tools

Exact tool applications, including hookless snap rings and 13/19-mm sockets.

  • Locking strip 0000 893 5903 blocks crankshaft; clip 1120 893 9100 holds big-end bearing; drift 1114 893 4700 installs piston pin; installing tool 8 5910 890 2208 fits HOOKLESS piston snap rings. The printed 8 is a tool designation, not eight tools.
  • Assembly tube 1117 890 0900 fits clutch spring; M8 stud puller 5910 893 0501 unscrews bar-mounting studs. Setting gauge 1111 890 6400 sets ignition module/flywheel air gap. Assembly tool 1116 893 4800 rewinds the rewind spring; hook 5910 893 8800 removes the FUEL pickup body, not the oil pickup.
  • Assembly stand 5910 890 3100 holds the saw; clamping bar 5910 890 2000 mounts it to the stand. Crimping tool 5910 890 8210 attaches electrical-wire connectors; puller 1116 893 0800 removes flywheel.
  • Socket 5910 893 5608 is 13 mm for the FLYWHEEL NUT; socket 5910 893 5612 is 19 mm for the CLUTCH. No complete interchange or machining specification for these tools is inferred.
  • Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.

Source: TI 23/1995, p. 9 — Section 5.2, assembly/holding, electrical, starter and socket rows.

Part numbers (15)
  • 0000 893 5903 — Piston locking stripblock crankshaft · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 1120 893 9100 — Cliphold big-end bearing · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 1114 893 4700 — Assembly driftinstall piston pin · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 890 2208 — Installing tool 8fit hookless piston snap rings · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 1117 890 0900 — Assembly tubefit clutch spring · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 893 0501 — M8 stud pullerunscrew bar-mounting studs · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 1111 890 6400 — Setting gaugeignition module/flywheel air gap · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 1116 893 4800 — Assembly toolrewind starter spring · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 893 8800 — Assembly hookremove fuel pickup body · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 890 3100 — Assembly standhold saw for repairs · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 890 2000 — Clamping barmount saw to stand · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 890 8210 — Crimping toolattach electrical connectors · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 1116 893 0800 — Flywheel pullerremove flywheel · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 893 5608 — 13-mm socketflywheel nut · 017; Section 5.2, assembly/holding, electrical, starter and socket rows
  • 5910 893 5612 — 19-mm socketclutch · 017; Section 5.2, assembly/holding, electrical, starter and socket rows

Service note · 017

017 torque wrenches and T27 drivers

0.5–18-Nm and 6–80-Nm ranges remain separate; signal versions identified.

  • Torque wrenches 5910 890 0301 and 5910 890 0302 cover 0.5–18 Nm; 5910 890 0311 and 5910 890 0312 cover 6–80 Nm. These are TOOL RANGES, not one torque instruction for every assembly.
  • Remark 2 (0301 and 0311 rows) says DG screws must ALWAYS be tightened with a torque wrench. Remark 3 identifies 0302 and 0312 versions as having optical/acoustic signals; do not attribute those signals to every listed wrench.
  • Screwdriver QI-T27x150 5910 890 2400 is listed for all IS screws; socket T27x125 0812 542 2104 for tightening IS screws. Retain their different lengths/types. Component torque values remain those in section 4.5.
  • Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.

Source: TI 23/1995, p. 9 — Section 5.2 torque-wrench/driver rows and remarks2–3.

Part numbers (6)
  • 5910 890 0301 — Torque wrench 0.5–18 Nmremark2 · 017; Section 5.2 torque-wrench/driver rows and remarks2–3
  • 5910 890 0302 — Torque wrench 0.5–18 Nmremark3; optical/acoustic signal · 017; Section 5.2 torque-wrench/driver rows and remarks2–3
  • 5910 890 0311 — Torque wrench 6–80 Nmremark2 · 017; Section 5.2 torque-wrench/driver rows and remarks2–3
  • 5910 890 0312 — Torque wrench 6–80 Nmremark3; optical/acoustic signal · 017; Section 5.2 torque-wrench/driver rows and remarks2–3
  • 5910 890 2400 — Screwdriver QI-T27x150all IS screws · 017; Section 5.2 torque-wrench/driver rows and remarks2–3
  • 0812 542 2104 — Socket T27x125tighten IS screws · 017; Section 5.2 torque-wrench/driver rows and remarks2–3

Service note · 017

017 repair-time schedule: two different stop-switch entries

Historical workshop allowances in decimal hours; source duplication retained.

  • If started during repairs/maintenance, the TI requires observing local/national safety regulations and owner-manual precautions. This reminder is not a complete operating procedure or authorization to run a saw. The referenced owner manual is not needed to identify the table values and is not falsely counted as a missing TI page.
  • Repair allowances assume TRAINED PERSONNEL in a PROPERLY EQUIPPED SERVICE WORKSHOP. Units are tenths of an HOUR (0.1 = 6 minutes), not minutes or guaranteed completion times.
  • Code 1 crankcase/crankcase cap 1.8 h; 2 crankshaft and/or bearings 2.0; 3 crankcase gasket/sealing 1.8; 4 crankshaft seals 0.8; 5 cylinder and/or piston 2.0; 6 ignition 0.5; 7 fuel hose/supply 0.5; 8 carb flange/connector 0.9; 9 carburetor 0.7; 10 oil-pump system 0.7; 11 handlebar/buffers/frame 0.7.
  • Code 12 recoil starter 0.5 h (code 12 is visible in the scan but missing from extracted text); 13 clutch 0.5; 14 chain brake 0.7; 15 muffler 0.4; 16 air filter/filter cover 0.3; 17 STOP SWITCH 0.4; 18 fuel tank/tank housing 1.2; 20 STOP SWITCH 0.5. There is NO CODE 19 row. The duplicate stop-switch labels with DIFFERENT times are a retained INTERNAL SOURCE AMBIGUITY; neither is silently renamed or selected as correct.
  • Footer: Waiblingen, March 2, 1995; © 1995 Andreas Stihl, D1/MTK-al, Technical Documentation. This printed issue date is distinct from PDF creation/modification metadata and is not a serial-production cutoff.
  • Historical TI guidance for model 017 as described in TI23/1995; shared series 1130 or tooling does not extend these specifications to 018, MS170, MS180 or later variants. No serial cutoff, present stock guarantee or physical interchange verification is implied. No hardware operation was performed.

Source: TI 23/1995, p. 11 — Sections 6–6.1, complete repair-time table and footer.

No additional parts-table entry added.

Wrong number or missing part for the 017? Report a correction →