Stihl 1132 · Section F · 6 of 9 · 13 parts
Handlebar
Fits 019 T.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (13)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1132 791 1700 | Handlebar | 1 |
| 2 | 1132 791 0600 | Handle molding | 1 |
| 3 | 9075 478 4155 | Pan head self-tapping screw IS-D5x24 | 1 |
| 4 | 1120 790 9600 | Annular buffer | 1 |
| 5 | 9022 341 0950 | Spline screw IS-M5x10 | 2 |
| 6 | 1132 182 0900 | Switch shaft | 1 |
| 7 | 1129 442 1600 | Contact spring | 1 |
| 8 | 1132 180 1500 | Throttle trigger | 1 |
| 9 | 1117 182 4500 | Torsion spring | 1 |
| 10 | 1129 182 0800 | Lockout lever | 1 |
| 11 | 1132 180 1100 | Throttle cable | 1 |
| 12 | 1132 791 1000 | Handle housing | 1 |
| 13 | 9075 478 4155 | Pan head self-tapping screw IS-D5x24 | 2 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 019 T
019 T: top-handle purpose, reed-valve engine and AV design
1996 specialist tree-surgery saw; four transfer ports, reed valve, three-piece AV element and pull-out ring.
- The cover describes a favorably priced TOP HANDLE saw for tree surgery and tree maintenance, developed for QUALIFIED AND PROPERLY TRAINED SPECIALISTS. This historical positioning and product photograph are not a general-use recommendation or a current price/availability claim.
- Engine description: hemispherical combustion chamber with FOUR transfer ports in the cylinder (drawing 170TI001 KN); REED VALVE; high-volume carburetor air intake from the machine’s low-dust zone; durable MACHINED crankshaft. Section 2.1 separately calls the crankshaft durable BUILT-UP; both descriptions retained, not a claim of one-piece construction.
- Muffler has a spark-arresting screen. Multi-part AV element is described as patented; drawing 170TI005 KN identifies 1 Plug, 2 Annular buffer, 3 Plug. These are figure callouts, not spare-part numbers, dimensions or assembly torques. Patent wording is a 1996 source statement, not current legal status.
- Ergonomically curved handlebar with oval section; multifunction lever and SEPARATE choke lever for hot and cold starts. Page 3 drawing 170TI006 KN shows the PULL-OUT RING pivoting out from the housing. No load rating, fall-arrest function or lifting procedure is specified.
- Historical TI40/1996 introduction for 019 T, series 1132 only. Later 2012 catalog sheets are navigation anchors, not proof that every listed part is original 1996 equipment. No extension to MS 190 T or MS 191 T, serial cutoff or verified physical interchange. No hardware operation was performed.
Source: TI 40/1996, p. 1 · TI 40/1996, p. 2 · TI 40/1996, p. 3 — top-handle purpose, reed-valve engine and AV design.
No additional parts-table entry added.
Wrong number or missing part for the 019 T? Report a correction →