← 019 T · MS 190 T · MS 191 T

Stihl 1132 · Section G · 7 of 9 · 20 parts

Air filter, Tools

Fits 019 T.

Parts diagrams →

Historical fitment & changes (8) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192330456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (20)

PosPart numberDescriptionQty
1 1132 124 0800 Filter plate 1
2 1132 141 0501 Filter cover Fitment / change note → 1
3 0000 951 1101 Screw IS-M5x18 1
4 0000 967 3501 Instruction label 1
5 1132 120 4700 Diaphragm 1
6 9210 260 0700 Hexagon nut M5 2
7 1132 129 0900 Gasket 1
8 1132 129 0910 Gasket 1
9 9075 478 4155 Pan head self-tapping screw IS-D5x24 2
10 9022 341 1110 Spline screw IS-M5x52 2
11 1132 120 0603 Carburetor C1Q-S46A Fitment / change note → → replaced by 1132 120 0604 TI 14/2001 1
12 1132 180 2500 Choke rod 1
13 not sold separately Lever not available as a separate item 1
14 1132 122 4101 Intake pipe 1
15 1132 122 7000 Grommet 1
16 1132 120 3800 Intake casing Fitment / change note → 1
17 0000 890 2300 NLA Screwdriver 1
18 0000 792 9128 Chain scabbard 1
19 1129 890 3401 Combination wrench option 1
30 1132 120 0600 Carburetor WT-451A → replaced by 1132 120 0602 TI 51/1997 no longer available from factory 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 019 T

019 T: fuel system and historical standard carburetor settings

All-position diaphragm carburetor, H/L each open one turn; 0.29 l tank, STIHL-oil 50:1 mixture and felt filter.

  • Section 2.2 specifies an ALL-POSITION diaphragm carburetor with integral fuel pump. Standard setting: high-speed screw H open 1 turn; low-speed screw L open 1 turn. No carburetor maker/type or complete adjustment sequence is supplied; later C1Q-S46A and WT-451A catalog sheets do not establish the original fitted carburetor.
  • Fuel tank 0.29 l (0.61 US pt). Fuel mixture: regular brand-name gasoline and two-stroke engine oil. The explicit octane parenthesis is US/CAN pump octane MINIMUM 89 UNLEADED; no RON equivalence or other-market threshold is invented.
  • Mix ratio is 50:1 WITH STIHL 50:1 TWO-STROKE ENGINE OIL, visually confirmed on the scan where extracted text is corrupted. Air filter: FELT ELEMENT. No blanket ratio for other oils, later fuel formulation approval, or modern replacement-filter material is inferred.
  • Historical TI40/1996 introduction for 019 T, series 1132 only. Later 2012 catalog sheets are navigation anchors, not proof that every listed part is original 1996 equipment. No extension to MS 190 T or MS 191 T, serial cutoff or verified physical interchange. No hardware operation was performed.

Source: TI 40/1996, p. 3 — fuel system and historical standard carburetor settings.

No additional parts-table entry added.

Service note · 019 T

019 T: carburetor parts kit and servicing-aid scope

1132 007 1060 is the named servicing aid; contents and carburetor-maker assignment are not specified.

  • Section 4.2 names CARBURETOR PARTS KIT 1132 007 1060. No contents, quantities, gasket/diaphragm breakdown, carburetor maker/type, replacement-kit number or supersession is printed.
  • Other servicing aids are referred to the STIHL 019 T service manual. Do not infer that the kit fits both later catalog carburetors C1Q-S46A and WT-451A; this source makes a model-level assignment only. The air-filter/tools sheet provides an exact-model navigation anchor, not a kit drawing position.
  • Historical TI40/1996, exact 019 T only. Later 2012 IPL sheets are navigation anchors, not proof of original 1996 equipment. No extension to MS 190 T or MS 191 T, serial cutoff or verified physical interchange. No hardware operation was performed.

Source: TI 40/1996, p. 5 — carburetor parts kit and servicing-aid scope.

Part numbers (1)
  • 1132 007 1060 — Carburetor parts kitNamed servicing aid; contents and carburetor variant unspecified · 019 T in TI40/1996 section 4

Service note · 019 T

019 T: engine and carburetor test data; torque-source gap

Engine pressure/vacuum each printed 0.6 bar (8.7 psi); carburetor pressure 0.4 bar (5.8 psi).

  • Section 5.2 ENGINE: pressure test 0.6 bar (8.7 psi); VACUUM test 0.6 bar (8.7 psi). The scan prints the same unsigned magnitude for both. Preserve the vacuum label; this is not a second positive-pressure test or an absolute-pressure specification.
  • Section 5.2 CARBURETOR: pressure test 0.4 bar (5.8 psi). Do not substitute the engine value. No test duration, acceptable leakage/drop, sealing fixture, crankshaft position, test sequence or instrument reference is printed on this page; these three values alone are not a complete test procedure.
  • Section 5.3 gives NO TIGHTENING TORQUES and refers to the STIHL 019 T service manual. An exact applicable manual was not identified in the bounded local document/PDF metadata, exact 019 T product links or resource/owner filename inventory. This is a documented local source gap, not proof no manual exists. No MS190T/MS191T torque table or generic fastener torque is substituted.
  • Historical TI40/1996, exact 019 T only. Later 2012 IPL sheets are navigation anchors, not proof of original 1996 equipment. No extension to MS 190 T or MS 191 T, serial cutoff or verified physical interchange. No hardware operation was performed.

Source: TI 40/1996, p. 6 — engine and carburetor test data; torque-source gap.

No additional parts-table entry added.

Service note · 019 T

019 T: owner/service manual dependencies and separate parts list

The TI is not a complete service manual; original-era references are not replaced by the later 2012 catalog.

  • Pages 5–6 refer to the STIHL 019 T SERVICE MANUAL for other special servicing tools, other servicing aids and tightening torques; page 5 separately requires the OWNER’S MANUAL safety precautions if starting during repair/maintenance. No edition or ordering number is printed for either manual.
  • Bounded local metadata and exact 019 T product links plus resource/owner filename search did not identify an applicable 019 T service or owner manual. Preserve these named source gaps and reopen on new exact evidence. Similar names and later MS successors do not establish coverage. This search does not claim worldwide or full-corpus semantic absence.
  • Section 6 says a SEPARATE ILLUSTRATED PARTS LIST is available for STIHL 019 T. Retained exact-019 T 2012 catalog sheets supply useful navigation, but the 1996 list/edition is not identified and its original contents are not reconstructed. No interchange, updated part assignment or current stock is proved by the announcement.
  • Later2012 Special Tools Manual exact019 T assignments and parent oil-pump tool detail are reviewed in separate dated notes. The2012 repair timetable instead prints MS019T / MS191T; this unresolved label does not replace the original1996 table. Exact original service/owner/timetable/IPL gaps remain. Copyright1996 and Technical Documentation imprint inspected; footer5872 is not a component number.
  • Historical TI40/1996, exact 019 T only. Later 2012 IPL sheets are navigation anchors, not proof of original 1996 equipment. No extension to MS 190 T or MS 191 T, serial cutoff or verified physical interchange. No hardware operation was performed.

Source: TI 40/1996, p. 5 · TI 40/1996, p. 6 · TI 40/1996, p. 7 — owner/service manual dependencies and separate parts list.

No additional parts-table entry added.

Service note · 019 T

019 T intake casing and cover: sealed assembly only

Separate casing and cover cease factory supply.

  • Original intake casing 1132 122 3800 and cover 1132 122 9800 are NO LONGER AVAILABLE SEPARATELY. They are supplied only as COMPLETE INTAKE CASING 1132 120 3800, PERMANENTLY SEALED AS AN AIRTIGHT ASSEMBLY.
  • Table item1 includes items2and3. Original versions are no longer factory-supplied; new versions are not available separately. Asterisks in their new columns are not replacement part numbers. Do not turn this supply instruction into a recipe to split, reseal or repair the assembly.
  • Introduction is IN PROGRESS, with no serial cutoff. X 36 566 423 is for section1, not this sealed assembly. The displaced 1132 120 3800 at page2 table header is preserved as an original layout anomaly; page4 names its intake-casing role explicitly.
  • Historical 1997-21 evidence for 019 T only; not later MS successors or unlisted variants. Source-era factory supply is not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.

Source: TI 21/1997, p. 2 · TI 21/1997, p. 4 — 019 T intake casing and cover: sealed assembly only.

Part numbers (3)
  • 1132 122 3800 — Original intake casing, item2Separate factory supply discontinued · 019 T; 019 T intake casing and cover: sealed assembly only; stated configuration only
  • 1132 122 9800 — Original cover, item3Separate factory supply discontinued · 019 T; 019 T intake casing and cover: sealed assembly only; stated configuration only
  • 1132 120 3800 — Complete sealed intake casing, item1Includes casing and cover; assembly only · 019 T; 019 T intake casing and cover: sealed assembly only; stated configuration only

Conditional replacement · 019 T

019 T: unlettered filter cover and fan-cover model plate

Model designation moves to the round nameplate; introduction in progress.

  • Section4 replaces1132 141 0500 with1132 141 0501. The new filter cover has NO model designation; “STIHL019 T” now appears on round nameplate1132 967 1500 on the fan cover (section1). A missing filter-cover legend is not proof of the wrong model.
  • Introduction IN PROGRESS; previous filter cover supplied only while existing stocks last. Cross-reference to section1 explains label location, not an extension of its serial cutoff. Later019 T G/doc91 and E/doc89 associate the new cover and plate.
  • Historical TI43/1999 english/USA evidence for 019 T, series1132 only. No extension to 019, 020 T, MS190 T or MS191 T from shared parts/series. Factory-availability remarks describe the historical issue, not current stock. No universal retrofit, numerical service setting or physical interchange verification is inferred.

Source: TI 43/1999, p. 1 · TI 43/1999, p. 3 — unlettered filter cover and fan-cover model plate.

Part numbers (3)
  • 1132 141 0500 — Filter coverPrevious; stocks last · 019 T; TI43 section filter-cover
  • 1132 141 0501 — Filter cover without model designationNew · 019 T; TI43 section filter-cover
  • 1132 967 1500 — Round019 T nameplateOn fan cover, not filter cover · 019 T; TI43 section filter-cover

Conditional replacement · 019 T

019 T: fuel tank hose with integral grommet

Unchanged tank number hides a revised hose; change coincides with the carburetor.

  • Figure170TI011 KN depicts new hose1132 358 7700 with INTEGRALLY MOLDED GROMMET; old hose4205 141 8601 and separate grommet0000 989 0516 are deleted from this model configuration. The bend is pictured, but no dimensions or trimming specification is supplied.
  • Tank1132 350 0400 retains its number on both sides and includes items2–4; valve0747 313 6810 also remains unchanged. The table’s new grommet cell is blank because the new hose incorporates it, not because the seal may be omitted.
  • Introduction IN PROGRESS and explicitly coincident with the new carburetor (section7). Remark1: only modified tank version available from factory. Remark2: old hose AND old grommet remain available FOR OTHER MODELS. Do not read the prose “deleted” as universal discontinuation.
  • Later exact019 T B/doc86 lists both new hose and old separate hose/grommet. Preserve this edition/context distinction: that catalog coexistence does not erase the TI’s other-model qualification or establish mixed old/new fuel components as interchangeable.
  • Historical TI43/1999 english/USA evidence for 019 T, series1132 only. No extension to 019, 020 T, MS190 T or MS191 T from shared parts/series. Factory-availability remarks describe the historical issue, not current stock. No universal retrofit, numerical service setting or physical interchange verification is inferred.

Source: TI 43/1999, p. 4 · TI 43/1999, p. 5 — fuel tank hose with integral grommet.

Part numbers (5)
  • 1132 350 0400 — Fuel tankItem1 previous and new; includes2–4; modified version only · 019 T; TI43 section tank-hose
  • 0747 313 6810 — ValveItem2 unchanged · 019 T; TI43 section tank-hose
  • 0000 989 0516 — Separate grommetPrevious item3; remains for other models · 019 T; TI43 section tank-hose
  • 4205 141 8601 — HosePrevious item4; remains for other models · 019 T; TI43 section tank-hose
  • 1132 358 7700 — Hose with integrally molded grommetNew item4 · 019 T; TI43 section tank-hose

Conditional replacement · 019 T

019 T: C1Q-S37 to C1Q-S46A elbow and hose change

Carburetor elbow reoriented for the new hose; old-spare wording retained.

  • Figure170TI012 KN explicitly labels LEFT previous C1Q-S37 and RIGHT new C1Q-S46A. Section7 replaces1132 120 0602 with1132 120 0603; elbow position is adapted to the new suction hose (section6). The drawing shows different elbow orientations; no numeric angle or adjustment setting is printed.
  • Introduction IN PROGRESS. Preserve the wording tension: prose says previous carburetor has been DELETED and replaced, while table remark1 says previous version REMAINS AVAILABLE AS SPARE. Neither statement is suppressed; no unrestricted drop-in interchange or current availability is inferred.
  • Later exact019 T G/doc91 and H/doc92 associate0603 with C1Q-S46A. Sheet G also lists WT-451A; that does not extend this bulletin’s C1Q-S37-to-S46A change to the Walbro variant. No MS190 T or MS191 T binding is admitted.
  • Footer “Last Technical Information on model019 T:51.97” is a chronological reference, not a delegated repair instruction. Copyright, editorial code6747 and quiet page regions contain no additional fitment assertion.
  • Historical TI43/1999 english/USA evidence for 019 T, series1132 only. No extension to 019, 020 T, MS190 T or MS191 T from shared parts/series. Factory-availability remarks describe the historical issue, not current stock. No universal retrofit, numerical service setting or physical interchange verification is inferred.

Source: TI 43/1999, p. 4 · TI 43/1999, p. 5 — C1Q-S37 to C1Q-S46A elbow and hose change.

Part numbers (2)
  • 1132 120 0602 — Carburetor C1Q-S37Previous; prose deleted, table remains spare · 019 T; TI43 section carburetor
  • 1132 120 0603 — Carburetor C1Q-S46ANew; adapted elbow position · 019 T; TI43 section carburetor

Wrong number or missing part for the 019 T? Report a correction →