← 019 T · MS 190 T · MS 191 T

Stihl 1132 · Section J · 9 of 9 · 36 parts

Carburetor WT-451A

Fits 019 T.

Parts diagrams →

Historical fitment & changes (7) — includes parts and conditions not shown on this drawing.

Change documented in Technical Information 51/1997 — Carburetor (fixed-jet); fan housing .

Position —

Go to table row → Where else is this used →
11011121314151617181922021222324252627282933031323334456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (36)

PosPart numberDescriptionQty
1 1115 121 5401 Valve jet Fitment / change note → 1
2 4117 122 9402 Plug Fitment / change note → 1
3 4116 121 5100 Inlet needle Fitment / change note → 1
4 1120 122 3001 Spring Fitment / change note → 1
5 1113 121 5000 Inlet control lever Fitment / change note → 1
6 1113 121 9200 Spindle Fitment / change note → 1
7 1114 122 7400 Round head screw Fitment / change note → 1
8 1120 129 0900 Gasket Fitment / change note → 1
9 1113 121 4705 Metering diaphragm Fitment / change note → 1
10 1113 121 0800 End cover Fitment / change note → 1
11 1106 122 7400 Round head screw Fitment / change note → 1
12 1114 121 7800 Strainer Fitment / change note → 1
13 1121 121 4801 Pump diaphragm Fitment / change note → 1
14 1120 129 0905 Gasket Fitment / change note → 1
15 1123 121 0802 End cover Fitment / change note → 1
16 1114 122 7100 Screw Fitment / change note → 1
17 4117 122 3006 Spring Fitment / change note → 1
18 4117 122 6200 Idle speed adjustment screw Fitment / change note → 1
19 1113 122 3205 Torsion spring Fitment / change note → 1
20 1132 120 7100 Throttle shaft with lever Fitment / change note → 1
21 1123 121 3301 Throttle shutter Fitment / change note → 1
22 1115 122 7400 Round head screw Fitment / change note → 1
23 1117 122 9000 E-clip Fitment / change note → 1
24 1132 122 6800 Low speed adjustment screw Fitment / change note → 1
25 1115 122 3002 Spring Fitment / change note → 1
26 1132 122 6700 High speed adjustment screw Fitment / change note → 1
27 4117 122 3007 Spring Fitment / change note → 1
28 1123 122 3201 Torsion spring Fitment / change note → 1
29 1132 120 7200 Choke shaft with lever Fitment / change note → 1
30 1110 122 7400 Round head screw Fitment / change note → 1
31 1123 122 9000 E-clip Fitment / change note → 1
32 1130 121 2900 Choke shutter Fitment / change note → 1
33 4126 121 5800 Pump piston Fitment / change note → 1
34 1132 122 3000 Spring Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— not sold separately Carburetor WT-451A no longer available from factory 1
— 1123 007 1061 Set of carburetor parts 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 019 T

019 T WT451 to WT451A: revised H and L screws

Carburetor number unchanged; not the fixed-jet C1Q-S37.

  • Carburetor 1132 120 0600 changes type designation from WT 451 to WT 451 A with MODIFIED HIGH SPEED AND LOW SPEED SCREWS. BOTH original and new columns retain 1132 120 0600; the part number alone does not identify the screw version.
  • HIGH SPEED SCREW: 1118 122 6700 to 1132 122 6700. LOW SPEED SCREW: 1123 122 6801 to 1132 122 6800. Complete carburetor includes items2and3; all other parts as before. Only the modified carburetor is available from factory; original screws remain available FOR OTHER MODELS.
  • Prose says changes will be installed IN THE FUTURE; table says IN PROGRESS. Neither is an exact date or machine-number boundary. Do not assign section1 cutoff X 36 566 423, delete the H screw, or confuse WT451A with fixed-jet C1Q-S37. No screw settings, sealant or mixed-version retrofit are specified.
  • Last Technical Information 019 T:40.96 is bibliography, not delegated work. Copyright1997/document6054 gives no exact issue date. Retained catalogue title omits section1, but all four original pages including its diagrams and roster are reviewed.
  • Historical 1997-21 evidence for 019 T only; not later MS successors or unlisted variants. Source-era factory supply is not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.

Source: TI 21/1997, p. 4 — 019 T WT451 to WT451A: revised H and L screws.

Part numbers (5)
  • 1132 120 0600 — WT451 original / WT451A new carburetorSame number; modified version only · 019 T; 019 T WT451 to WT451A: revised H and L screws; stated configuration only
  • 1118 122 6700 — Original high-speed screwRetained for other models · 019 T; 019 T WT451 to WT451A: revised H and L screws; stated configuration only
  • 1132 122 6700 — New high-speed screwWT451A arrangement · 019 T; 019 T WT451 to WT451A: revised H and L screws; stated configuration only
  • 1123 122 6801 — Original low-speed screwRetained for other models · 019 T; 019 T WT451 to WT451A: revised H and L screws; stated configuration only
  • 1132 122 6800 — New low-speed screwWT451A arrangement · 019 T; 019 T WT451 to WT451A: revised H and L screws; stated configuration only

Conditional replacement · 019 T

019 T: C1Q-S37 fixed-jet change at X 37 623 374

Zama C1Q-S37 replaces Walbro WT 451 A; the fixed jet is Ø0.47 mm.

X 37 623 374 — Fixed-jet C1Q-S37 and associated fan-housing modification introduced from this machine number on 019 T; retain printed X prefix. Not a whole-model production range or permission to mix carburetor internals.

  • Historical TI51/1997 for 019 T, series 1132 only. The 2012 IPL is a navigation/comparison source, not proof that later C1Q-S46A internals match C1Q-S37. No extension to MS 190 T or MS 191 T. No hardware operation was performed.
  • From machine number X 37 623 374, Zama C1Q-S37 1132 120 0602 replaces Walbro WT 451 A 1132 120 0600. Original complete WT 451 A is no longer available from the factory (remark 1), while marked original components remain spares (remark 2).
  • The fixed jet is Ø0.47 mm, number 1132 121 5601. Drawing 170TI008 KN locates it and enlarges its 47 marking. Drawing 170TI007 KN labels LA above L; this is not a carburetor with an adjustable H screw. No mixture-turn setting, idle RPM or retrofit procedure is supplied here.
  • The table says each carburetor includes items 1–38, but version columns contain dashes: items 3,18,33,35 are new-only; items 36–38 are old-only. The broad inclusion heading does not put all 38 components in both carburetors, create a mixed-parts kit or establish component interchange.
  • The later 019 T IPL instead lists C1Q-S46A 1132 120 0603 and fixed jet 0.48, number 1132 121 5600. These are not this TI’s C1Q-S37/0602 and 0.47/5601. The later sheet does not silently replace the historical specification.

Source: TI 51/1997, p. 1 · TI 51/1997, p. 2 — Section 1 complete, three diagrams and summary assembly rows.

Part numbers (3)
  • 1132 120 0600 — Walbro WT 451 A complete carburetorOriginal assembly · 019 T; use only the stated original/new carburetor or housing version
  • 1132 120 0602 — Zama C1Q-S37 complete carburetorNew assembly · 019 T; use only the stated original/new carburetor or housing version
  • 1132 121 5601 — Fixed jet Ø0.47 mm, marking 47New fixed jet · 019 T; use only the stated original/new carburetor or housing version

Conditional replacement · 019 T

019 T: fixed-jet metering components and unchanged inlet needle

Rows 1–8 preserve the valve jet, plug, 0.47 jet and inlet-control changes.

X 37 623 374 — Fixed-jet C1Q-S37 and associated fan-housing modification introduced from this machine number on 019 T; retain printed X prefix. Not a whole-model production range or permission to mix carburetor internals.

  • Historical TI51/1997 for 019 T, series 1132 only. The 2012 IPL is a navigation/comparison source, not proof that later C1Q-S46A internals match C1Q-S37. No extension to MS 190 T or MS 191 T. No hardware operation was performed.
  • Row 1, Valve jet: 1115 121 5401 → 1132 121 5400.
  • Row 2, Plug: 4117 122 9402 → 4226 121 0700.
  • Row 3, Fixed jet 0.47: no original counterpart → 1132 121 5601.
  • Row 4, Inlet needle: 4116 121 5100 → 4116 121 5100. The number is unchanged.
  • Row 5, Spring: 1120 122 3001 → 1120 122 3004.
  • Row 6, Inlet control lever: 1113 121 5000 → 1125 121 5000.
  • Row 7, Spindle: 1113 121 9200 → 1120 121 9200.
  • Row 8, Round head screw: 1114 122 7400 → 1120 122 6600.
  • Remark 2: every original component numbered in these rows remains available as a spare part in this 1997 bulletin. This differs from the complete WT 451 A assembly, which is no longer available from the factory under remark 1. Historical supply statements do not establish current stock.
  • Only the inlet-needle number is unchanged in this group. Old/new columns document version assignments, not permission to exchange the other individual components. New-only fixed jet row 3 has no original counterpart and no old-part spare remark.

Source: TI 51/1997, p. 2 — Summary rows 1–8, version columns and remarks.

Part numbers (14)
  • 1115 121 5401 — Row 1: Valve jetOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 121 5400 — Row 1: Valve jetNew version · 019 T; use only the stated original/new carburetor or housing version
  • 4117 122 9402 — Row 2: PlugOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 4226 121 0700 — Row 2: PlugNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 121 5601 — Row 3: Fixed jet 0.47New version · 019 T; use only the stated original/new carburetor or housing version
  • 4116 121 5100 — Row 4: Inlet needleUnchanged original/new · 019 T; use only the stated original/new carburetor or housing version
  • 1120 122 3001 — Row 5: SpringOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1120 122 3004 — Row 5: SpringNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1113 121 5000 — Row 6: Inlet control leverOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1125 121 5000 — Row 6: Inlet control leverNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1113 121 9200 — Row 7: SpindleOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1120 121 9200 — Row 7: SpindleNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1114 122 7400 — Row 8: Round head screwOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1120 122 6600 — Row 8: Round head screwNew version · 019 T; use only the stated original/new carburetor or housing version

Conditional replacement · 019 T

019 T: metering and pump diaphragm component changes

Rows 9–17 retain both gasket/end-cover groups and their different fasteners.

X 37 623 374 — Fixed-jet C1Q-S37 and associated fan-housing modification introduced from this machine number on 019 T; retain printed X prefix. Not a whole-model production range or permission to mix carburetor internals.

  • Historical TI51/1997 for 019 T, series 1132 only. The 2012 IPL is a navigation/comparison source, not proof that later C1Q-S46A internals match C1Q-S37. No extension to MS 190 T or MS 191 T. No hardware operation was performed.
  • Row 9, Gasket: 1120 129 0900 → 1123 129 0901.
  • Row 10, Metering diaphragm: 1113 121 4705 → 1123 121 4700.
  • Row 11, End cover: 1113 121 0800 → 1123 121 0801.
  • Row 12, Round head screw: 1106 122 7400 → 4132 122 6600.
  • Row 13, Strainer: 1114 121 7800 → 1123 121 7800.
  • Row 14, Pump diaphragm: 1121 121 4801 → 1129 121 4800.
  • Row 15, Gasket: 1120 129 0905 → 1123 129 0905.
  • Row 16, End cover: 1123 121 0802 → 1123 121 0800.
  • Row 17, Screw: 1114 122 7100 → 1120 122 7800.
  • Remark 2: every original component numbered in these rows remains available as a spare part in this 1997 bulletin. This differs from the complete WT 451 A assembly, which is no longer available from the factory under remark 1. Historical supply statements do not establish current stock.
  • The two end covers and two gaskets belong to distinct rows; do not collapse them by shared descriptions. The TI calls rows 8 and 12 round head screws and row 17 screw; later IPL descriptions differ. Preserve TI names and numbers without inventing thread sizes or torque values.

Source: TI 51/1997, p. 2 — Summary rows 9–17, version columns and remarks.

Part numbers (18)
  • 1120 129 0900 — Row 9: GasketOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 129 0901 — Row 9: GasketNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1113 121 4705 — Row 10: Metering diaphragmOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 121 4700 — Row 10: Metering diaphragmNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1113 121 0800 — Row 11: End coverOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 121 0801 — Row 11: End coverNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1106 122 7400 — Row 12: Round head screwOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 4132 122 6600 — Row 12: Round head screwNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1114 121 7800 — Row 13: StrainerOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 121 7800 — Row 13: StrainerNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1121 121 4801 — Row 14: Pump diaphragmOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1129 121 4800 — Row 14: Pump diaphragmNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1120 129 0905 — Row 15: GasketOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 129 0905 — Row 15: GasketNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 121 0802 — Row 16: End coverOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 121 0800 — Row 16: End coverNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1114 122 7100 — Row 17: ScrewOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1120 122 7800 — Row 17: ScrewNew version · 019 T; use only the stated original/new carburetor or housing version

Conditional replacement · 019 T

019 T: choke, throttle and low-speed control changes

Rows 18–31 retain the new-only ball, shaft changes and historical low-speed screw number.

X 37 623 374 — Fixed-jet C1Q-S37 and associated fan-housing modification introduced from this machine number on 019 T; retain printed X prefix. Not a whole-model production range or permission to mix carburetor internals.

  • Historical TI51/1997 for 019 T, series 1132 only. The 2012 IPL is a navigation/comparison source, not proof that later C1Q-S46A internals match C1Q-S37. No extension to MS 190 T or MS 191 T. No hardware operation was performed.
  • Row 18, Ball: no original counterpart → 1125 122 4200.
  • Row 19, Idle speed screw: 4117 122 6200 → 1123 122 6200.
  • Row 20, Torsion spring: 1113 122 3205 → 1123 122 3200.
  • Row 21, Choke shaft with lever: 1132 120 7200 → 1132 120 7201.
  • Row 22, Choke shutter: 1130 121 2900 → 1132 121 2901.
  • Row 23, Round head screw: 1115 122 7400 → 1125 122 7403.
  • Row 24, E-clip: 1117 122 9000 → 1125 122 9002.
  • Row 25, Low speed screw: 1123 122 6800 → 1132 122 6801.
  • Row 26, Spring: 1115 122 3002 → 1120 122 3005.
  • Row 27, Torsion spring: 1123 122 3201 → 1123 122 3000.
  • Row 28, Throttle shaft with lever: 1132 120 7100 → 1132 120 7101.
  • Row 29, E-clip: 1123 122 9000 → 1125 122 9001.
  • Row 30, Round head screw: 1110 122 7400 → 1120 122 7400.
  • Row 31, Throttle valve: 1123 121 3301 → 1132 121 3300.
  • Remark 2: every original component numbered in these rows remains available as a spare part in this 1997 bulletin. This differs from the complete WT 451 A assembly, which is no longer available from the factory under remark 1. Historical supply statements do not establish current stock.
  • Row 18 calls 1125 122 4200 a BALL, with no old counterpart. The later C1Q-S46A IPL calls that number CLAMP. Both source descriptions are retained; reused numbering does not resolve the naming conflict.
  • Row 25 prints original low-speed screw 1123 122 6800. The later WT-451A IPL lists 1132 122 6800. Do not normalize 1123 to 1132 or infer an alias: the conflict remains unresolved. Row 27 calls 1123 122 3000 a torsion spring; it is not the separately numbered pump spring in row 34.
  • The old low/high screw number conflicts and the later carburetor designation do not alter this original/new table. No setting is inferred from the fan-housing diagram’s L/LA markings.

Source: TI 51/1997, p. 2 — Summary rows 18–31, version columns and remarks.

Part numbers (27)
  • 1125 122 4200 — Row 18: BallNew version · 019 T; use only the stated original/new carburetor or housing version
  • 4117 122 6200 — Row 19: Idle speed screwOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 122 6200 — Row 19: Idle speed screwNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1113 122 3205 — Row 20: Torsion springOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 122 3200 — Row 20: Torsion springNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 120 7200 — Row 21: Choke shaft with leverOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 120 7201 — Row 21: Choke shaft with leverNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1130 121 2900 — Row 22: Choke shutterOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 121 2901 — Row 22: Choke shutterNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1115 122 7400 — Row 23: Round head screwOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1125 122 7403 — Row 23: Round head screwNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1117 122 9000 — Row 24: E-clipOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1125 122 9002 — Row 24: E-clipNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 122 6800 — Row 25: Low speed screwOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 122 6801 — Row 25: Low speed screwNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1115 122 3002 — Row 26: SpringOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1120 122 3005 — Row 26: SpringNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 122 3201 — Row 27: Torsion springOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 122 3000 — Row 27: Torsion springNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 120 7100 — Row 28: Throttle shaft with leverOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 120 7101 — Row 28: Throttle shaft with leverNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 122 9000 — Row 29: E-clipOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1125 122 9001 — Row 29: E-clipNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1110 122 7400 — Row 30: Round head screwOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1120 122 7400 — Row 30: Round head screwNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1123 121 3301 — Row 31: Throttle valveOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 121 3300 — Row 31: Throttle valveNew version · 019 T; use only the stated original/new carburetor or housing version

Conditional replacement · 019 T

019 T: pump piston, seal, spring and strainer changes

Rows 32–35 preserve new-only seal/strainer and distinct pump-spring numbers.

X 37 623 374 — Fixed-jet C1Q-S37 and associated fan-housing modification introduced from this machine number on 019 T; retain printed X prefix. Not a whole-model production range or permission to mix carburetor internals.

  • Historical TI51/1997 for 019 T, series 1132 only. The 2012 IPL is a navigation/comparison source, not proof that later C1Q-S46A internals match C1Q-S37. No extension to MS 190 T or MS 191 T. No hardware operation was performed.
  • Row 32, Pump piston: 4126 121 5800 → 1132 121 5800.
  • Row 33, Sealing ring: no original counterpart → 1132 122 3600.
  • Row 34, Spring: 1132 122 3000 → 1132 122 3001.
  • Row 35, Strainer: no original counterpart → 1132 121 7800.
  • Remark 2: every original component numbered in these rows remains available as a spare part in this 1997 bulletin. This differs from the complete WT 451 A assembly, which is no longer available from the factory under remark 1. Historical supply statements do not establish current stock.
  • New-only sealing ring row 33 and strainer row 35 have no original counterpart. The new pump piston and spring have individual order numbers in this TI; the later IPL lists piston, seal and spring as kit-referenced rows without individual numbers. That later packaging does not erase this historical list.

Source: TI 51/1997, p. 2 — Summary rows 32–35, version columns and remarks.

Part numbers (6)
  • 4126 121 5800 — Row 32: Pump pistonOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 121 5800 — Row 32: Pump pistonNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 122 3600 — Row 33: Sealing ringNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 122 3000 — Row 34: SpringOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 122 3001 — Row 34: SpringNew version · 019 T; use only the stated original/new carburetor or housing version
  • 1132 121 7800 — Row 35: StrainerNew version · 019 T; use only the stated original/new carburetor or housing version

Conditional replacement · 019 T

019 T: H screw and two springs are absent from the new carburetor

Rows 36–38 are old-only parts, retained as spares for the original version.

X 37 623 374 — Fixed-jet C1Q-S37 and associated fan-housing modification introduced from this machine number on 019 T; retain printed X prefix. Not a whole-model production range or permission to mix carburetor internals.

  • Historical TI51/1997 for 019 T, series 1132 only. The 2012 IPL is a navigation/comparison source, not proof that later C1Q-S46A internals match C1Q-S37. No extension to MS 190 T or MS 191 T. No hardware operation was performed.
  • Row 36, Spring: 4117 122 3006 → no new counterpart.
  • Row 37, High speed screw: 1118 122 6700 → no new counterpart.
  • Row 38, Spring: 4117 122 3007 → no new counterpart.
  • Remark 2: every original component numbered in these rows remains available as a spare part in this 1997 bulletin. This differs from the complete WT 451 A assembly, which is no longer available from the factory under remark 1. Historical supply statements do not establish current stock.
  • The new C1Q-S37 column has dashes for all three rows. This documents their absence from the new fixed-jet design, not instructions to remove them from a WT 451 A.
  • Row 37 prints original high-speed screw 1118 122 6700. The later WT-451A IPL lists 1132 122 6700. Preserve the unresolved 1118/1132 conflict; neither number is silently corrected or treated as an alias.

Source: TI 51/1997, p. 2 — Summary rows 36–38, version columns and remarks.

Part numbers (3)
  • 4117 122 3006 — Row 36: SpringOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 1118 122 6700 — Row 37: High speed screwOriginal version · 019 T; use only the stated original/new carburetor or housing version
  • 4117 122 3007 — Row 38: SpringOriginal version · 019 T; use only the stated original/new carburetor or housing version

Wrong number or missing part for the 019 T? Report a correction →