Stihl 1132 · Section H · 8 of 9 · 39 parts
Carburetor C1Q-S46A
Fits 019 T.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (39)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1132 121 5400 | Valve jet | 1 |
| 2 | 4226 121 0700 | Cup plug | 1 |
| 3 | 1132 121 5600 | Fixed jet 0.48 | 1 |
| 4 | 4116 121 5100 | Inlet needle | 1 |
| 5 | 1120 122 3004 | Spring | 1 |
| 6 | 1125 121 5000 | Inlet control lever | 1 |
| 7 | 1120 121 9200 | Spindle | 1 |
| 8 | 1120 122 6600 | Collar screw | 1 |
| 9 | 1123 129 0901 | Gasket | 1 |
| 10 | 1123 121 4700 | Metering diaphragm | 1 |
| 11 | 1123 121 0801 | End cover | 1 |
| 12 | 4132 122 6600 | Collar screw | 2 |
| 13 | 1123 121 7800 | Strainer | 1 |
| 14 | 1129 121 4800 | Pump diaphragm | 1 |
| 15 | 1123 129 0905 | Gasket | 1 |
| 16 | 1123 121 0800 | End cover | 1 |
| 17 | 1120 122 7800 | Oval head screw | 1 |
| 18 | 1125 122 4200 | Clamp | 1 |
| 19 | 1123 122 6200 | Idle speed adjustment screw | 1 |
| 20 | 1123 122 3200 | Torsion spring | 1 |
| 21 | 1132 120 7201 | Choke shaft with lever | 1 |
| 22 | 1132 121 2901 | Choke shutter | 1 |
| 23 | 1125 122 7403 | Round head screw | 1 |
| 24 | 1125 122 9002 | E-clip | 1 |
| 25 | 1132 122 6801 | Low speed adjustment screw | 1 |
| 26 | 1120 122 3005 | Spring | 1 |
| 27 | 1123 122 3000 | Spring | 1 |
| 28 | 1132 120 7101 | Throttle shaft with lever | 1 |
| 29 | 1125 122 9001 | E-clip | 1 |
| 30 | 1120 122 7400 | Round head screw | 1 |
| 31 | 1132 121 3300 | Throttle shutter | 1 |
| 32 | not sold separately | Pump piston not available as a separate item | 1 |
| 33 | not sold separately | Sealing ring not available as a separate item | 1 |
| 34 | not sold separately | Spring not available as a separate item | 1 |
| 35 | 1132 121 7800 | Strainer | 1 |
| 36 | 1132 121 5640 | Fixed jet 0.40 option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1132 120 0603 | Carburetor C1Q-S46A Fitment / change note → → replaced by 1132 120 0604 TI 14/2001 | 1 |
| — | 1137 120 9700 | Pump piston kit | 1 |
| — | 1123 007 1060 | Set of carburetor parts | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 019 T
019 T: fuel tank hose with integral grommet
Unchanged tank number hides a revised hose; change coincides with the carburetor.
- Figure170TI011 KN depicts new hose1132 358 7700 with INTEGRALLY MOLDED GROMMET; old hose4205 141 8601 and separate grommet0000 989 0516 are deleted from this model configuration. The bend is pictured, but no dimensions or trimming specification is supplied.
- Tank1132 350 0400 retains its number on both sides and includes items2–4; valve0747 313 6810 also remains unchanged. The table’s new grommet cell is blank because the new hose incorporates it, not because the seal may be omitted.
- Introduction IN PROGRESS and explicitly coincident with the new carburetor (section7). Remark1: only modified tank version available from factory. Remark2: old hose AND old grommet remain available FOR OTHER MODELS. Do not read the prose “deleted” as universal discontinuation.
- Later exact019 T B/doc86 lists both new hose and old separate hose/grommet. Preserve this edition/context distinction: that catalog coexistence does not erase the TI’s other-model qualification or establish mixed old/new fuel components as interchangeable.
- Historical TI43/1999 english/USA evidence for 019 T, series1132 only. No extension to 019, 020 T, MS190 T or MS191 T from shared parts/series. Factory-availability remarks describe the historical issue, not current stock. No universal retrofit, numerical service setting or physical interchange verification is inferred.
Source: TI 43/1999, p. 4 · TI 43/1999, p. 5 — fuel tank hose with integral grommet.
Part numbers (5)
- 1132 350 0400 — Fuel tankItem1 previous and new; includes2–4; modified version only · 019 T; TI43 section tank-hose
- 0747 313 6810 — ValveItem2 unchanged · 019 T; TI43 section tank-hose
- 0000 989 0516 — Separate grommetPrevious item3; remains for other models · 019 T; TI43 section tank-hose
- 4205 141 8601 — HosePrevious item4; remains for other models · 019 T; TI43 section tank-hose
- 1132 358 7700 — Hose with integrally molded grommetNew item4 · 019 T; TI43 section tank-hose
Conditional replacement · 019 T
019 T: C1Q-S37 to C1Q-S46A elbow and hose change
Carburetor elbow reoriented for the new hose; old-spare wording retained.
- Figure170TI012 KN explicitly labels LEFT previous C1Q-S37 and RIGHT new C1Q-S46A. Section7 replaces1132 120 0602 with1132 120 0603; elbow position is adapted to the new suction hose (section6). The drawing shows different elbow orientations; no numeric angle or adjustment setting is printed.
- Introduction IN PROGRESS. Preserve the wording tension: prose says previous carburetor has been DELETED and replaced, while table remark1 says previous version REMAINS AVAILABLE AS SPARE. Neither statement is suppressed; no unrestricted drop-in interchange or current availability is inferred.
- Later exact019 T G/doc91 and H/doc92 associate0603 with C1Q-S46A. Sheet G also lists WT-451A; that does not extend this bulletin’s C1Q-S37-to-S46A change to the Walbro variant. No MS190 T or MS191 T binding is admitted.
- Footer “Last Technical Information on model019 T:51.97” is a chronological reference, not a delegated repair instruction. Copyright, editorial code6747 and quiet page regions contain no additional fitment assertion.
- Historical TI43/1999 english/USA evidence for 019 T, series1132 only. No extension to 019, 020 T, MS190 T or MS191 T from shared parts/series. Factory-availability remarks describe the historical issue, not current stock. No universal retrofit, numerical service setting or physical interchange verification is inferred.
Source: TI 43/1999, p. 4 · TI 43/1999, p. 5 — C1Q-S37 to C1Q-S46A elbow and hose change.
Part numbers (2)
- 1132 120 0602 — Carburetor C1Q-S37Previous; prose deleted, table remains spare · 019 T; TI43 section carburetor
- 1132 120 0603 — Carburetor C1Q-S46ANew; adapted elbow position · 019 T; TI43 section carburetor
Wrong number or missing part for the 019 T? Report a correction →