Stihl 1207 · Section B · 2 of 5 · 36 parts
Electric motor E 220 C, E 20 C
Fits E 20, E 220.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (36)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1207 600 0850 | Motor housing | 1 |
| 2 | 1206 084 2605 | Filter | 1 |
| 3 | 1207 432 2400 | Cap | 1 |
| 4 | 0000 988 6115 | Plug | 1 |
| 5 | 1207 600 0150 | Stator 230 V | 1 |
| 6 | 9074 478 4355 | Pan head self-tapping screw IS-P5x80 | 2 |
| 7 | 1206 084 1800 | Air guide ring | 1 |
| 8 | 1207 600 1000 | Rotor with fanwheel 230 V | 1 |
| 9 | 1206 608 1200 | Washer | 1 |
| 10 | 9503 003 9670 | Grooved ball bearing 608-2Z | 1 |
| 11 | 1206 086 0502 | Fanwheel | 1 |
| 12 | 1207 430 1400 | Electronic module | 1 |
| 13 | 1207 431 6400 | Insulating foil | 1 |
| 14 | 1206 435 0310 | Quick-action switch | 1 |
| 15 | 1207 430 2200 | Wiring harness | 1 |
| 16 | 0751 030 8401 | Terminal socket B2.8 no longer available from factory | 3 |
| 17 | 0751 030 8958 | Terminal socket 4.8-1 no longer available from factory | 5 |
| 18 | not sold separately | Terminal block not available as a separate item | 1 |
| 19 | 1207 440 2000 | Connecting cable 230 V | 1 |
| 19 | 1207 440 2001 | Connecting cable 230 V | 1 |
| 20 | 1204 431 2400 | Cable protector | 1 |
| 21 | 1207 435 0302 | Switch | 1 |
| 22 | 1206 435 0303 | Switch | 1 |
| 23 | 1204 431 2500 | Cable clamp | 1 |
| 24 | 9074 478 3025 | Pan head self-tapping screw IS-P4x16 | 3 |
| 26 | 9074 478 3075 | Pan head self-tapping screw IS-P4x19 | 8 |
| 27 | 1207 600 2602 | Brush holder | 2 |
| 28 | 1207 007 1005 | Set of carbon brushes | 1 |
| 29 | 1206 791 1506 | Front handle | 1 |
| 30 | 9074 478 3475 | Pan head self-tapping screw IS-P4.5x25 | 3 |
| 31 | 0000 967 3736 | Warning pictogram MSE | 1 |
| 32 | 1207 967 1808 | Rating plate E 220 C | 1 |
| 33 | 1207 431 6900 | Insulatur | 1 |
| 34 | 1206 084 1200 | Fan screen | 1 |
| 35 | 9074 478 3025 | Pan head self-tapping screw IS-P4x16 | 2 |
| 40 | 1207 967 1804 | Rating plate E 20 C | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · E 20 / E 20 C
E 20 / E 20 C: distinct clip-in nameplates replace riveted versions
The E20 and E20C have different nameplate pairs. The two rivets are deleted from the new clip-in arrangement; the clutch serial does not date this change.
- E20: aluminium nameplate 1207 967 1500 → plastic clip-in 1207 967 1501. E20C: 1207 967 1505 → 1207 967 1502. Do not merge the model-specific rows.
- Two round-head rivets 0000 974 1000 are deleted from the new arrangement. Original plates and rivets remain available for older machines in this bulletin; this is not a blanket rivet discontinuation.
- The logo is embedded in the carrier by a two-component process. Better scratch resistance and longer legibility are source claims, not tested here.
- Nameplate introduction is in progress, with no numeric cutoff. The X31 010 462 serial belongs only to friction-clutch summary3.1, not nameplate summary3.2.
- The catalog motor sheets are linked as contextual assembly pages: their titles distinguish E20 and E20C although their used_by label groups E20/E220. The source itself explicitly names E20C; no E220 coverage or unlisted retrofit fastening detail is inferred.
- TI35/1992 is listed only as the previous E20 bulletin. Its unavailable contents are not required to read these complete current rows and are not imported as compatibility evidence.
- TI40/1994 is dated November18,1994. Historical availability is not current stock; this review does not verify a physical retrofit. Shared E20/E220 catalog sheets do not extend this bulletin to E220, MSE220 or other successor models.
Source: TI 40/1994, p. 2 · TI 40/1994, p. 3 — Section2 and summary3.2, distinct model rows and availability.
Part numbers (5)
- 1207 967 1500 — Original aluminium E20 nameplateOld · E20 only
- 1207 967 1501 — Clip-in plastic E20 nameplateNew · E20 only
- 1207 967 1505 — Original aluminium E20C nameplateOld · E20C only
- 1207 967 1502 — Clip-in plastic E20C nameplateNew · E20C only
- 0000 974 1000 — Round-head rivet, twoDeleted from new arrangement · Retained for older nameplates
Wrong number or missing part for the E 20, E 220? Report a correction →