Stihl 4116 · Section G · 7 of 16 · 34 parts
Air filter, Shroud
Fits FS 500, FS 550, FS 550 L.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (34)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4116 120 1602 | Air filter | 1 |
| 2 | 4116 141 0300 | Auxiliary filter | 1 |
| 3 | 4116 149 0500 | Gasket | 1 |
| 4 | 4116 140 1901 | Carburetor box cover | 1 |
| 5 | 4116 141 8303 | Slotted nut | 2 |
| 6 | 4116 123 7500 | Grommet | 1 |
| 7 | 4116 182 9501 | Choke knob | 1 |
| 8 | 4116 141 1102 | Insert | 1 |
| 9 | 4116 080 1604 | Shroud Fitment / change note → | 1 |
| 10 | 9416 868 5630 | Hollow rivet 5.5x0.5x6.8 | 4 |
| 11 | 9286 620 9810 | Flat nut 4.2 | 3 |
| 12 | 4116 967 1505 | Model plate FS 500 | 1 |
| 13 | 4116 967 1506 | Model plate FS 550 Fitment / change note → | 1 |
| 14 | 9022 313 0680 | Spline screw IS-M4x16 | 4 |
| 15 | 4116 140 7101 | Protecting shroud | 1 |
| 16 | 9416 868 6630 | Hollow rivet 6.5x0.5x6.8 | 2 |
| 17 | 9100 021 3280 | Self-tapping screw 4.2x14 | 3 |
| 18 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 2 |
| 19 | 4116 080 1606 | Exhaust deflector | 1 |
| 20 | 9416 868 5630 | Hollow rivet 5.5x0.5x6.8 | 1 |
| 21 | 9286 620 9810 | Flat nut 4.2 | 1 |
| 22 | 9100 021 3280 | Self-tapping screw 4.2x14 | 1 |
| 23 | 9291 021 0100 | Washer 4.3 | 1 |
| 24 | 4116 141 2600 | Bow | 1 |
| 25 | 9307 021 0100 | Washer 4.3 | 1 |
| 26 | 4116 141 1800 | Sleeve | 1 |
| 27 | 9022 341 1070 | Spline screw IS-M5x30 | 1 |
| 28 | 9022 313 0740 | Spline screw IS-M4x25 | 1 |
| 29 | 4116 141 1700 | Filter plate | 1 |
| 30 | 4116 790 7805 | Guard plate | 1 |
| 31 | 9022 341 1220 | Spline screw IS-M5x48 | 2 |
| 32 | 9022 341 1070 | Spline screw IS-M5x30 | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4116 007 1017 | Wire guard kit | 1 |
| — | 4116 007 1012 | Guard plate kit | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 550 / FS 360 / FS 420
FS 550: shroud and drive-tube assembly inclusions
Drive tube includes plug and warning label; the FS 550 nameplate is separate.
- Drive tube item 20 INCLUDES plug 21 and warning label 22. Nameplate 19 is specifically FS 550; it is not listed as included with the shroud. No drive-tube length is printed in this table.
- Remark 1 identifies shroud 18 and drive tube 20 as predecessor FS 360/FS 420 spares too. It does not separately mark nameplate 19, plug 21 or warning label 22. Keep assembly inclusion distinct from a blanket predecessor-fitment claim for each component.
- Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.
Source: TI 44/1997, p. 10 — Section7 rows18–22 and remark1.
Part numbers (5)
- 4116 080 1604 — Item18 shroud; remark1Exact section7 row · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
- 4116 967 1506 — Item19 FS550 nameplateExact section7 row · FS 550 table context; no separate predecessor remark on this row
- 4116 710 7145 — Item20 FS550 drive tube including21/22; remark1Exact section7 row · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
- 4116 711 2100 — Item21 plugExact section7 row · FS 550 table context; no separate predecessor remark on this row
- 0000 967 3684 — Item22 warning labelExact section7 row · FS 550 table context; no separate predecessor remark on this row
Wrong number or missing part for the FS 500, FS 550, FS 550 L? Report a correction →