Stihl 4116 · Section J · 9 of 16 · 14 parts
Drive tube assembly
Fits FS 500, FS 550, FS 550 L.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (14)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4116 710 7159 | Drive tube assembly Ø 35 mm / 1 3/8'' | 1 |
| 2 | 4116 710 7160 | Drive tube assembly Ø 35 mm / 1 3/8'' | 1 |
| 3 | 4116 710 7155 | Drive tube assembly Ø 35 mm / 1 3/8'' Fitment / change note → | 1 |
| 4 | 4116 711 7300 | Flexible liner | 1 |
| 5 | 4116 711 2100 | Plug Fitment / change note → | 2 |
| 6 | 0000 967 3725 | Warning pictogram FS | 1 |
| 7 | 4116 711 7301 | Flexible liner | 1 |
| 8 | 0000 967 3684 | Warning pictogram FS Fitment / change note → | 1 |
| 9 | 4116 711 3212 | Drive shaft | 1 |
| 10 | 4116 711 3211 | Drive shaft | 1 |
| 11 | 0781 120 1110 | Gear lubricant 225 g option | 1 |
| 12 | 4116 710 7149 | Drive tube assembly Ø 35 mm / 1 3/8'' | 1 |
| 13 | 4116 710 7150 | Drive tube assembly Ø 35 mm / 1 3/8'' | 1 |
| 14 | 4116 710 7145 | Drive tube assembly Ø 35 mm / 1 3/8'' Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 550
FS 550: separate shaft, gearhead and seal lubricants
Keep three lubricant applications distinct; the carburetor kit names HD 22 and HD 23.
- STIHL gear lubricant 0781 120 1109, 3 oz/80 g tube, is for the DRIVE SHAFT IN THE DRIVE TUBE. Gear lubricant 0781 120 1117, 3 oz/80 g tube, is for the GEARHEAD. Lubricating grease 0781 120 1111, 13 oz/370 g tube, is for OIL SEALS. The TI does not state these products are interchangeable.
- Carburetor parts kit 4116 007 1061 explicitly lists Walbro HD 22 and HD 23. Gasket set 4116 007 1051 has no separate application text in its row; do not silently copy the carburetor-kit restriction or infer its component contents. Common service-kit availability does not establish identical HD 22/HD 23 adjustment settings.
- Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.
Source: TI 44/1997, p. 7 · TI 44/1997, p. 8 — Section4 lubricant rows and complete section5.2 servicing-aids table.
Part numbers (5)
- 0781 120 1109 — Drive-shaft gear lubricant;80 gPrinted application only · Only named models/configurations and restrictions in this note
- 0781 120 1117 — Gearhead lubricant;80 gPrinted application only · Only named models/configurations and restrictions in this note
- 0781 120 1111 — Oil-seal lubricating grease;370 gPrinted application only · Only named models/configurations and restrictions in this note
- 4116 007 1061 — Walbro HD22/HD23 carburetor parts kitPrinted application only · Only named models/configurations and restrictions in this note
- 4116 007 1051 — Set of gaskets; contents not specifiedPrinted application only · Only named models/configurations and restrictions in this note
Service note · FS 550 / FS 360 / FS 420
FS 550: shroud and drive-tube assembly inclusions
Drive tube includes plug and warning label; the FS 550 nameplate is separate.
- Drive tube item 20 INCLUDES plug 21 and warning label 22. Nameplate 19 is specifically FS 550; it is not listed as included with the shroud. No drive-tube length is printed in this table.
- Remark 1 identifies shroud 18 and drive tube 20 as predecessor FS 360/FS 420 spares too. It does not separately mark nameplate 19, plug 21 or warning label 22. Keep assembly inclusion distinct from a blanket predecessor-fitment claim for each component.
- Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.
Source: TI 44/1997, p. 10 — Section7 rows18–22 and remark1.
Part numbers (5)
- 4116 080 1604 — Item18 shroud; remark1Exact section7 row · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
- 4116 967 1506 — Item19 FS550 nameplateExact section7 row · FS 550 table context; no separate predecessor remark on this row
- 4116 710 7145 — Item20 FS550 drive tube including21/22; remark1Exact section7 row · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
- 4116 711 2100 — Item21 plugExact section7 row · FS 550 table context; no separate predecessor remark on this row
- 0000 967 3684 — Item22 warning labelExact section7 row · FS 550 table context; no separate predecessor remark on this row
Conditional replacement · FS 550
FS 550: sleeved drive tube and matching deflector clamp
Mount only on the 37.5 mm sleeve immediately behind the gearhead; old parts remain for older machines.
- The sleeve defines the correct deflector position IMMEDIATELY BEHIND THE GEARHEAD. It raises the tube diameter in the CLAMP AREA to 37.5 mm (printed 1.5 inches) over a 50 mm (printed 2 inches) length. Modified deflector and clamp fit that larger area, so the deflector can now be secured ONLY WITHIN THE SLEEVE AREA. These rounded inch values are source equivalents, not new machining tolerances.
- Figure 398TI009 KN identifies drive tube (1), deflector (2) and clamp (3); all three mating areas are marked diameter 37.5 mm. The integrally CAST number INSIDE the NEW clamp begins 4116..., distinguishing the ORIGINAL 4110... clamp. Do not use a generic external marking or the source figure as a fabrication template; no tightening torque is given.
- The drive-tube row is explicitly FS 550 (USA): 4116 710 7145 becomes 4116 710 7155. Deflector kit WITHOUT GRASS SHIELD changes 4116 007 1016 to 4116 007 1020; deflector assembly changes 4116 710 8101 to 4116 710 8102. The table says each of the above includes deflector item 2 (4116 713 4501 to 4116 713 4502) and clamp item 3 (4110 716 6501 to 4116 716 6501). Keep the USA drive-tube qualification distinct from the kit/assembly descriptions.
- All five rows carry remark 1: ORIGINAL versions remain available for OLDER MACHINES AND FS 360 / FS 420. This is not authorization to fit the NEW FS 550 parts to those models. All other parts as before; introduction IN PROGRESS, with no serial boundary or unconditional whole-system retrofit statement.
- The retained FS 500/550/550 L J sheet lists the exact new drive tube at position 3 as diameter 35 mm / 1 3/8 inches. That nominal tube description does NOT erase the source 37.5 mm SLEEVE-AREA diameter. O sheet retains exact kit, assembly, deflector and clamp rows; shared-sheet FS 500 and FS 550 L coverage is not added. Preserve IPL quantities, geometry and contents independently from the historical TI.
- No hardware operation was performed. Historical factory supply is not current stock or verified physical interchange.
Source: TI 33/1998, p. 1 — Section 1 complete: sleeve location and dimensions, clamp identification, exploded figure, five part rows, inclusions and availability remark.
Part numbers (10)
- 4116 710 7145 — Drive tube FS 550 (USA)Original · FS 550; USA restriction on drive-tube row
- 4116 710 7155 — Drive tube FS 550 (USA), sleevedNew · FS 550; USA restriction on drive-tube row
- 4116 007 1016 — Deflector kit without grass shieldOriginal · FS 550; USA restriction on drive-tube row
- 4116 007 1020 — Deflector kit without grass shieldNew · FS 550; USA restriction on drive-tube row
- 4116 710 8101 — Deflector assemblyOriginal · FS 550; USA restriction on drive-tube row
- 4116 710 8102 — Deflector assemblyNew · FS 550; USA restriction on drive-tube row
- 4116 713 4501 — Deflector, item 2Original · FS 550; USA restriction on drive-tube row
- 4116 713 4502 — Deflector, item 2New · FS 550; USA restriction on drive-tube row
- 4110 716 6501 — Clamp, item 3Original · FS 550; USA restriction on drive-tube row
- 4116 716 6501 — Clamp, item 3New · FS 550; USA restriction on drive-tube row
Wrong number or missing part for the FS 500, FS 550, FS 550 L? Report a correction →