Stihl 4119 · Section F · 5 of 18 · 24 parts
Air filter
Fits FS 160, FS 180.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (24)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4119 182 7600 | Tensioner | 1 |
| 2 | 9307 021 0120 | Washer 5.3 | 2 |
| 3 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 1 |
| 4 | 4119 120 0602 | Carburetor C1S-S3E | 1 |
| 5 | 4119 123 7501 | Grommet | 1 |
| 6 | 9210 260 0700 | Hexagon nut M5 | 2 |
| 7 | 4119 182 9500 | Choke knob | 1 |
| 8 | 4119 182 0700 | Grommet | 1 |
| 9 | 4119 182 2102 | Support | 1 |
| 10 | 4119 182 2100 | Support | 1 |
| 11 | 9294 021 0080 | Washer 3.2 | 1 |
| 12 | 9099 021 1760 | Self-tapping screw 2.9x9.5 | 1 |
| 13 | 4119 120 1600 | Air filter | 1 |
| 14 | 4119 141 0300 | Auxiliary filter | 1 |
| 15 | 4119 141 1000 | Carburetor box cover | 1 |
| 16 | 4119 141 8302 | Slotted nut | 2 |
| 17 | 4119 084 0900 | Shroud | 1 |
| 18 | 4119 967 1509 | Model plate FS 160 Fitment / change note → | 1 |
| 18 | 4119 967 1511 | Model plate FS 180 Fitment / change note → | 1 |
| 19 | 9025 313 0741 | Spline screw M4x25 | 4 |
| 20 | 4119 141 1700 | Filter plate Fitment / change note → option | 1 |
| 40 | 4119 967 1505 | Model plate FS 160 Fitment / change note → | 1 |
| 40 | 4119 967 1510 | Model plate FS 180 Fitment / change note → | 1 |
| 41 | 0000 974 1000 | Round head rivet 3x6 Fitment / change note → | 2 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 160 / FS 180 / FS 220 / FS 280
FS 160 / 180 / 220 / 280: optional fine-dust filter replaces auxiliary filter
Oil-impregnated bonded foam mat 4119 141 1700 is for extremely dusty conditions.
- Optional filter mat 4119 141 1700 consists of bonded FINE-pored and COARSE-pored foam sheets, oil impregnated to retain extra-fine dust. It is installed IN PLACE OF the standard auxiliary filter, not stacked as an additional mat or substituted for the whole main filter assembly.
- The mat has been available for some time for extremely dusty conditions. Each comes with illustrated installation and cleaning instructions; this TI does not specify cleaning solvent, oil dose or layer orientation, so none is invented. Separate supplied instructions are not reviewed by proxy.
- Historical TI 15/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 15/1994, p. 3 — FS 160 / 180 / 220 / 280: optional fine-dust filter replaces auxiliary filter.
Part numbers (1)
- 4119 141 1700 — Oil-impregnated fine/coarse foam filter matspecial accessory replacing auxiliary filter · FS 160 / 180 / 220 / 280: optional fine-dust filter replaces auxiliary filter
Conditional replacement · FS 160 / FS 180 / FS 220 / FS 220 K / FS 280 / FS 280 K
FS160–280 nameplates: plastic plates require modified shroud
Six model-specific plate pairs retain aluminium spares; plastic clips cannot fit original shroud holes.
X 31 103 922 — Model-conditioned introduction of this specific change only; not a model-identification or production-year range.
- From X 31 103 922 riveted ALUMINIUM nameplates change to clip-in PLASTIC plates. Two retaining tabs lock the plastic plate into two newly COUNTERSUNK mounting holes. Plastic plates CANNOT BE FITTED to the ORIGINAL shroud because its holes differ. This is not permission to drill or modify an old shroud; no machining dimensions or shroud replacement numbers are specified.
- The table keeps each model separate: FS160 4119 967 1505 → 1509; FS180 1510 → 1511; FS220 1500 → 1501; FS220 K 1503 → 1507; FS280 1502 → 1506; FS280 K 1504 → 1508 (all share prefix 4119 967). MOQ 10 applies to each new plate, not ten plates installed per machine. K variants are explicitly included HERE, not inferred for the carburetor or filter sections.
- Original aluminium plates and the TWO round-head rivets 0000 974 1000, size 3x6, REMAIN AVAILABLE for older machines. The new-side dash on the rivet row does not mean old-machine rivets are no longer supplied. Later exact-model air-filter sheets retain the old and new plate numbers and rivet; none of this establishes compatibility with unmodified shroud holes.
- Historical TI guidance for the explicitly named models and stated versions only. Shared IPL sheets are navigation, not an extension to every listed variant or proof of unrestricted interchange. Supply statements are historical, not current stock guarantees. No hardware operation was performed.
Source: TI 16/1995, p. 3 — Section 3: plastic nameplate construction, shroud restriction and six-model table.
Part numbers (13)
- 4119 967 1505 — FS 160 aluminium nameplateoriginal; retained spare for old shroud · FS 160
- 4119 967 1509 — FS 160 plastic nameplatenew; MOQ 10; modified shroud only · FS 160
- 4119 967 1510 — FS 180 aluminium nameplateoriginal; retained spare for old shroud · FS 180
- 4119 967 1511 — FS 180 plastic nameplatenew; MOQ 10; modified shroud only · FS 180
- 4119 967 1500 — FS 220 aluminium nameplateoriginal; retained spare for old shroud · FS 220
- 4119 967 1501 — FS 220 plastic nameplatenew; MOQ 10; modified shroud only · FS 220
- 4119 967 1503 — FS 220 K aluminium nameplateoriginal; retained spare for old shroud · FS 220 K
- 4119 967 1507 — FS 220 K plastic nameplatenew; MOQ 10; modified shroud only · FS 220 K
- 4119 967 1502 — FS 280 aluminium nameplateoriginal; retained spare for old shroud · FS 280
- 4119 967 1506 — FS 280 plastic nameplatenew; MOQ 10; modified shroud only · FS 280
- 4119 967 1504 — FS 280 K aluminium nameplateoriginal; retained spare for old shroud · FS 280 K
- 4119 967 1508 — FS 280 K plastic nameplatenew; MOQ 10; modified shroud only · FS 280 K
- 0000 974 1000 — Round-head rivet 3x6two fitted to original aluminium plate; retained spare · FS 160; FS 180; FS 220; FS 220 K; FS 280; FS 280 K
Wrong number or missing part for the FS 160, FS 180? Report a correction →