← Brushcutters & other equipment · series 4119

Stihl 4119 · Section J · 8 of 18 · 29 parts

Two-handed handle bar, Control handle

Fits FS 160, FS 180.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220212223242425262734567889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (29)

PosPart numberDescriptionQty
1 4137 790 1701 Handlebar → replaced by 4128 790 1701, 4128 790 1701 TI 9/2003 1
2 4128 791 0300 Handle, left 1
3 4137 791 0900 Clamp 1
4 4119 791 6800 Clamp 1
5 4119 791 0900 Clamp 1
6 9022 341 1400 Spline screw IS-M6x40 4
7 9210 319 0900 Hexagon nut M6 4
8 4140 790 0301 Handle 1
9 4128 182 1700 Slide control 1
10 4128 182 4201 Detent spring 1
11 4128 182 6200 Collar screw 1
12 4128 182 4502 Torsion spring 1
13 4128 182 4504 Torsion spring 1
14 4128 182 4500 Torsion spring 1
15 4128 182 1000 Throttle trigger 1
16 4128 182 4501 Torsion spring 1
17 4128 182 0800 Lockout lever 1
18 9074 478 3025 Pan head self-tapping screw IS-P4x16 3
19 9214 320 0700 Lock nut M5 1
20 9022 346 1070 Spline screw IS-M5x30 1
21 9291 021 0120 Washer 5.3 1
22 4119 180 1101 Throttle cable 1
23 not sold separately Hose 830 mm / 32 3/4'' not available as a separate item 1
24 0751 030 8454 Spade terminal no longer available from factory 2
25 4119 182 2101 Support 1
26 4119 710 6700 Hose clamp 1
27 9022 341 1270 Spline screw IS-M6x14 1
Not numbered on the diagram — assemblies, kits and options
— 4140 790 1304 Control handle 1
— 4203 711 7201 Hose 960 mm / 37 13/16'' 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 74 / FS 76 / FS 81 / FS 86 / FS 96 / FS 106 / FS 160 / FS 180

FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection

4126 791 7610 → 4126 791 7611; 24mm tubes require sleeve 4121 791 7200.

  • Modified support 4126 791 7611 (item4) replaces 4126 791 7610 for 25.4 mm (1 in) and 26 mm (approximately 1 1/16 in) drive tubes. For 24 mm (approximately 15/16 in) tubes, fit sleeve 4121 791 7200 (item5). The scan clearly prints 1 1/16, not 11/16; extracted text lost the space.
  • Exact assignment table: FS 76 and FS 81 have 24 mm tubes, sleeve REQUIRED; FS 74 has 25.4 mm, NO sleeve; FS 86, FS 96, FS 106, FS 160 and FS 180 have 26 mm, NO sleeve. These are the listed historical bike-handle configurations, not a universal specification for every variant bearing those model names.
  • Introduction is in progress. Original support stock is supplied only until exhausted. The support is included in bike-handle kit 4133 007 1010, whose unmodified stock is also supplied until exhausted; this kit reference belongs to section9 FS 74/76, not an asserted conversion kit for every model in the diameter table.
  • The figure shows the support and sleeve together with the surrounding clamp pieces. No new part number for those other pieces or clamp torque is supplied; no measured physical fit test is claimed.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 10 · TI 1/1994, p. 11 — FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection.

Part numbers (4)
  • 4126 791 7610 — Original handlebar supportoriginal · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4126 791 7611 — Modified handlebar supportreplacement · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4121 791 7200 — Required sleeve only for the listed 24mm drive tubesconditional-component · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4133 007 1010 — Section9 FS74/76 bike-handle kit, not all table modelskit · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection

Wrong number or missing part for the FS 160, FS 180? Report a correction →