← Brushcutters & other equipment · series 4119

Stihl 4119 · Section H · 7 of 18 · 22 parts

Clutch housing, Drive tube assembly

Fits FS 160, FS 180.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122345678999
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (22)

PosPart numberDescriptionQty
1 4119 161 0501 Clutch housing 1
2 9503 003 6650 Grooved ball bearing 6203-2RS 1
3 9456 621 4330 Circlip 40x1.75 1
4 9455 621 1800 Circlip 17x1 1
5 4119 791 9300 Rubber insert 1
6 4119 791 7200 Sleeve 1
7 4119 792 6900 Washer 1
8 4119 162 2800 Cap 1
9 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 10
10 9307 021 0100 Washer 4.3 1
11 9022 313 0680 Spline screw IS-M4x16 1
12 4119 710 7104 Drive tube assembly Ø 28 mm / 1 1/8'' x 1.55 m / 61" 1
13 4119 710 7108 Drive tube assembly Ø 26 mm / 1 1/16'' 1
14 4119 711 7301 Flexible liner 1
15 0000 967 3725 Warning pictogram FS 1
16 0000 967 3684 Warning pictogram FS 1
17 4119 711 3201 Drive shaft 1
18 4119 791 9400 Cable clamp 1
19 4119 791 7205 Sleeve 1
20 4119 162 2805 Cap 1
21 4119 710 7109 Drive tube assembly Ø 26 mm / 1 1/16'' 1
22 4119 711 3212 Drive shaft 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 160 / FS 180 / FS 220 / FS 280

FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired

Unlined clutch shoes require the new drum; replacement assembly includes both.

X 28 469 096 — Printed introduction for this component only; not a universal machine cutoff or interchange guarantee.

  • From X 28 469 096, clutch 4119 160 2001 has shoes WITHOUT linings and is paired with a new drum of smaller inside diameter. Original and new versions CANNOT be combined. New clutch-with-drum assembly 4119 160 2050 includes items 1–3; clutch item 1 includes unchanged spring 0000 997 6205 (item 2). No drum bore dimension is printed.
  • Original drum 4119 160 2905 is no longer factory-available, so use the complete new assembly to replace it. The new drum (item 3, printed -*- rather than an order number) is NOT separately available up to the end of 1998. No later separate-drum number is supplied here.
  • Original clutch 4119 160 2000 remains available for older machines up to END OF 1998; after that date the new clutch AND new drum must be used. This is a historical supply timeline, not current stock evidence. All other parts remain as before. Cover scope does not silently include FS 290, FR 220 or K variants sharing an IPL sheet.
  • Historical TI 15/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 15/1994, p. 1 — FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired.

Part numbers (5)
  • 4119 160 2000 — Original lined clutchhistorically available through end of 1998 · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
  • 4119 160 2001 — New unlined clutch, item 1requires matching new drum · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
  • 4119 160 2050 — Clutch with drum, items 1–3complete replacement assembly · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
  • 0000 997 6205 — Clutch spring, item 2unchanged; included in clutch · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
  • 4119 160 2905 — Original clutch drum, item 3no longer factory-available · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired

Wrong number or missing part for the FS 160, FS 180? Report a correction →