← Brushcutters & other equipment · series 4119

Stihl 4119 · Section D · 4 of 17 · 23 parts

Tank housing

Fits FS 220, FS 220 K, FS 280, FS 280 K, FS 290.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111212131415161718192203456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (23)

PosPart numberDescriptionQty
1 4119 350 0800 Tank housing 1
2 1121 122 6600 Collar screw 2
3 9210 260 0700 Hexagon nut M5 1
4 not sold separately Hose 3.1x5.7x240 mm, R3 not available as a separate item 1
5 9443 825 7130 Hollow rivet 7.5x1x6.8 4
6 4119 141 2200 Manifold 1
7 9771 021 2550 Hose clip Ø 32x5 1
8 not sold separately Hose 3.1x5.7x53 mm, R3 not available as a separate item 1
9 not sold separately Hose 3.1x5.7x27 mm, R3 not available as a separate item 1
9 not sold separately Hose 3.1x5.7x22 mm, R3 not available as a separate item 1
10 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 4
11 9291 021 0120 Washer 5.3 1
12 4119 431 6700 Terminal socket no longer available from factory 2
13 9099 021 0810 Self-tapping screw 4.2x9.5 1
14 1113 141 1805 Sleeve 1
15 1121 121 8600 Washer 1
16 0000 350 3502 Pickup body 1
17 0000 358 1800 Filter 1
18 4116 350 0502 Filler cap Fitment / change note → 1
19 0000 350 0900 Rope Fitment / change note → 1
20 0000 353 0600 Hook Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2803 Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption 1
— 0712 923 8004 Hose 3.1x5.7 mm x 10 m, R3 not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 160 / FS 180 / FS 220 / FS 280

FS 160 / 180 / 220 / 280: sintered-filter cap at X 32 014 559

Same cap number 4116 350 0501, separate earlier serial boundary.

X 32 014 559 — Modified sintered-filter fuel filler cap introduced from this machine number on the named series 4119 models; not the other section changeover.

  • Modified cap 4116 350 0501 with a filter made from SINTERED MATERIAL is introduced from X 32 014 559, independently of the starter change X 32 735 494. Pressure equalization between tank and atmosphere remains through valve(1); filter(2) helps stop dirt entering the valve/fuel system. Cross-section labels 1/2 are not the exploded spare-table positions.
  • Complete cap keeps number 4116 350 0501 and includes items 1–7. Only the MODIFIED cap version is available from factory (remark 1). The printed availability prose abbreviates the number to 4116 350 050, while its opening paragraph/table use 0501; preserve this discrepancy rather than create a separate order number.
  • Table item 1 sealing ring 0000 992 7101 is unchanged. New filter item 2 is 0000 358 1810. New valve item 3 is 4114 353 1600; its original cell is an asterisk marker, not an identifiable old part. The source warns that not all individual parts are interchangeable between successive cap modifications. Matching the complete cap number does not establish internal interchange or revision.
  • Historical TI 08/1996 evidence for the named FS 160, FS 180, FS 220 and FS 280, series 4119. Shared sheets do not add FS 220 K, FS 280 K, FS 290 or FR 220. No hardware operation was performed; factory supply statements are historical, not current stock. Starter and fuel-cap serial changes are independent.

Source: TI 8/1996, p. 2 — FS 160 / 180 / 220 / 280: sintered-filter cap at X 32 014 559.

Part numbers (4)
  • 4116 350 0501 — Complete fuel filler cap including items 1–7same number; only modified version supplied · FS160/180/220/280; TI08/1996 stated configuration
  • 0000 992 7101 — Item 1 sealing ringunchanged · FS160/180/220/280; TI08/1996 stated configuration
  • 0000 358 1810 — Item 2 sintered filternew · FS160/180/220/280; TI08/1996 stated configuration
  • 4114 353 1600 — Item 3 valvenew; original number not given · FS160/180/220/280; TI08/1996 stated configuration

Historical fitment · FS 160 / FS 180 / FS 220 / FS 280

FS 160 / 180 / 220 / 280: cap subassembly supply restrictions

Tank vent not separate; cord/hook retained as spares for other models only.

X 32 014 559 — Modified sintered-filter fuel filler cap introduced from this machine number on the named series 4119 models; not the other section changeover.

  • Item 4 original tank vent 4116 350 5800 has an asterisk in the new column and remark 2: NOT AVAILABLE AS SEPARATE ITEM. This does not imply that the cap no longer contains a vent or that it can be omitted.
  • Item 5 cap retainer 4116 350 0900 is unchanged and INCLUDES items 6 and 7. Original cord item 6 is 0000 350 0900 and original hook item 7 is 0000 353 0600; both new cells are asterisks. Remark 3 says these remain available as spares FOR OTHER MODELS, not unrestricted separate replacements for this modified cap.
  • The complete cap includes 1–7 while the cap retainer nests 6–7. No extra duplicated cord/hook quantity is inferred. Not all cap internal parts interchange; the exploded illustration alone is not an interchange license. Last-TI16/1995 citation and imprint are bibliography, not additional cap fitment.
  • Historical TI 08/1996 evidence for the named FS 160, FS 180, FS 220 and FS 280, series 4119. Shared sheets do not add FS 220 K, FS 280 K, FS 290 or FR 220. No hardware operation was performed; factory supply statements are historical, not current stock. Starter and fuel-cap serial changes are independent.

Source: TI 8/1996, p. 2 — FS 160 / 180 / 220 / 280: cap subassembly supply restrictions.

Part numbers (4)
  • 4116 350 5800 — Item 4 tank ventnot available separately · FS160/180/220/280; TI08/1996 stated configuration
  • 4116 350 0900 — Item 5 cap retainerunchanged; includes 6/7 · FS160/180/220/280; TI08/1996 stated configuration
  • 0000 350 0900 — Item 6 cordspare retained for other models · FS160/180/220/280; TI08/1996 stated configuration
  • 0000 353 0600 — Item 7 hookspare retained for other models · FS160/180/220/280; TI08/1996 stated configuration

Historical fitment · FS 160 / FS 180 / FS 220 / FS 280 / FS 360 / FS 420 / FS 550

FS 160–550 named models: two-filter fuel cap and restricted spare-part supply

Complete cap replacement includes seven items; only cord and hook remain separate for the new version.

  • For FS 550, present fuel filler cap 4116 350 0501 is to be replaced in the FORESEEABLE FUTURE by 4116 350 0502; introduction remains IN PROGRESS. The new cap is ALSO a replacement for FS 160, FS 180, FS 220, FS 280, FS 360 and FS 420. This is an exact named-model list, NOT a continuous FS 160–550 range, and does not add K/L variants, FS 290, FS 500 or FR 220 from shared sheets or reused part numbers.
  • Figure 398TI010 KN shows TWO filters of SINTERED material with arrows to the two filter positions. Figure 398TI011 KN shows items 1–7 and the cord/hook routing: sealing ring (1), upper filter (2), valve (3), tank vent (4), lower filter (5), cord (6) and hook (7). It does not provide filter pore size, pressure limits, fabrication dimensions or a complete overhaul procedure.
  • To simplify stockkeeping and avoid assembly errors, only the COMPLETE NEW CAP and its separate CORD / HOOK are supplied as replacement parts. Cap 4116 350 0502 includes items 1–7. Original cap 4116 350 0501 is supplied only WHILE EXISTING STOCKS LAST (remark 1); this is not current availability.
  • Items 1–3 retain their ORIGINAL spare numbers 0000 992 7101 sealing ring, 0000 358 1810 filter and 4114 353 1600 valve under remark 2. Each NEW-version column is -*- with remark 3: NOT AVAILABLE SEPARATELY. Original cap-retainer assembly 4116 350 0900 likewise remains an ORIGINAL spare (remark 2), but the NEW retainer assembly is not separately supplied (remark 3). These retained old spares are not declared suitable to rebuild the new cap.
  • Tank vent item 4 has -*- in BOTH columns and remark 3; filter item 5 has --- original and -*- new with remark 3. No standalone part number is given for either new item, and none is invented. The footnote defines * as not separately available. Cord 0000 350 0900 and hook 0000 353 0600 have the SAME numbers in both columns and no numbered remark; they are the separately supplied new-cap retainer components. Do not confuse complete retainer 4116 350 0900 with cord 0000 350 0900.
  • All four exact-model tank-housing sheets retain cap 4116 350 0502 plus cord and hook. No variant expansion or IPL-row rewrite follows. Last TI44.97 is a bibliographic pointer, not a missing prerequisite for this self-contained cap replacement.
  • No hardware operation was performed. Historical factory supply is not current stock or verified physical interchange.

Source: TI 33/1998, p. 2 — Section 2 complete: two sintered filters, exact replacement models, complete-cap supply, exploded items 1–7, retainer rows, all remarks and footer.

Part numbers (8)
  • 4116 350 0501 — Original complete fuel filler capWhile stocks last · Only the seven named FS models; new cap versus original spares distinguished
  • 4116 350 0502 — New fuel filler cap including items 1–7Complete replacement · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 992 7101 — Original sealing ring, item 1Original spare retained; new version not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 358 1810 — Original filter, item 2Original spare retained; new version not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 4114 353 1600 — Original valve, item 3Original spare retained; new version not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 4116 350 0900 — Original cap retainer assembly including 6 and 7Original spare retained; new assembly not separate · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 350 0900 — Cord, item 6Unchanged; separate spare · Only the seven named FS models; new cap versus original spares distinguished
  • 0000 353 0600 — Hook, item 7Unchanged; separate spare · Only the seven named FS models; new cap versus original spares distinguished

Wrong number or missing part for the FS 220, FS 220 K, FS 280, FS 280 K, FS 290? Report a correction →