← Brushcutters & other equipment · series 4119

Stihl 4119 · Section C · 3 of 17 · 35 parts

Ignition system

Fits FS 220, FS 220 K, FS 280, FS 280 K, FS 290.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161717181922020213441424344454546474849550516789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (35)

PosPart numberDescriptionQty
1 4119 400 1201 Flywheel Fitment / change note → 1
2 9210 261 1140 Hexagon nut M8x1 1
3 0000 400 1306 Ignition module Fitment / change note → 1
3 4119 400 1306 Ignition module 1
4 not sold separately Ignition lead 295 mm not available as a separate item 1
5 0000 998 0606 Torsion spring 1
6 1106 405 1000 Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 1
7 9291 021 0121 Washer 5.3 2
8 9022 371 0710 Spline screw IS-M4x20 2
9 4119 405 1900 Retainer 1
10 4119 440 1107 Short circuit wire 1
11 0751 030 8958 Terminal socket 4.8-1 no longer available from factory 1
12 0751 030 8950 NLA Terminal socket A 4-1 no longer available from factory 1
13 0751 030 8470 Grommet no longer available from factory 1
14 0000 448 1203 Lead retainer 1
15 0000 448 1200 Lead retainer 1
16 4119 160 2906 Clutch drum 1
17 4119 160 2001 Clutch 1
18 0000 997 6205 Tension spring 1
19 0000 961 0505 Ring 2
20 0000 958 0609 Washer 4
21 9022 341 1350 Spline screw IS-M6x25 2
41 9291 021 0180 Washer 8.4 1
42 4119 440 1105 Short circuit wire 1
43 0751 030 8951 Terminal socket A3-1 no longer available from factory 1
44 0751 030 8950 NLA Terminal socket A 4-1 no longer available from factory 1
45 9041 216 0300 Pan head screw M3x4 1
46 4119 400 1301 Ignition coil 1
47 4119 400 1000 Trigger unit 1
48 4119 400 2400 Panel 1
49 9022 313 0650 Spline screw IS-M4x10 2
50 4119 442 0400 Hose 1
51 0000 989 1010 Grommet 1
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m not illustratedoption 1
— 0000 930 2251 Ignition lead 10 m not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 160 / FS 180 / FS 220 / FS 280

FS 160 / FS 180 / FS 220 / FS 280: series 4119 replacement ignition assignment

0000 400 1306 with flywheel 4119 400 1201; 290 mm ignition lead.

  • Printed series 4119. Use 0000 400 1306 with flywheel 4119 400 1201.
  • Printed ignition-lead length: 290 mm (11 7/16 in). Preserve both printed units.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.

Part numbers (2)
  • 0000 400 1306 — Replacement ignition moduleAssigned component · FS 160 / FS 180 / FS 220 / FS 280, printed series 4119, listed combination only
  • 4119 400 1201 — Assigned flywheelRequired pairing · FS 160 / FS 180 / FS 220 / FS 280, printed series 4119

Wrong number or missing part for the FS 220, FS 220 K, FS 280, FS 280 K, FS 290? Report a correction →