← FS 81, FS 86 · FS 88 · FS 106

Stihl 4126 · Section J · 9 of 12 · 20 parts

Gear head FS 81

Fits FS 81.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131517181922330456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (20)

PosPart numberDescriptionQty
1 4124 640 0500 Gear housing 1
2 9503 003 9850 Grooved ball bearing 609 → replaced by 9503 003 9853 TI 46/2000 2
3 not sold separately Drive pinion not available as a separate item 1
4 not sold separately Spur bevel gear not available as a separate item 1
5 9503 003 9853 Grooved ball bearing 609-2Z 1
6 9455 621 0750 Circlip 9x1 1
7 9456 621 2660 Circlip 24x1.2 1
8 4124 642 0600 Drive shaft 1
9 9503 003 5190 Grooved ball bearing 6001-2RS 1
10 9456 621 3100 Circlip 28x1.2 1
11 4119 713 6500 Screw plug 1
12 0000 958 0503 Washer 2
13 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 2
15 4126 710 3800 Thrust plate 1
17 4126 713 1600 Thrust washer 1
18 4126 713 3100 Rider plate 1
19 4126 642 7600 Collar nut M10x1 l/h thread 1
30 not sold separately Guard washer not available as a separate item 1
Not numbered on the diagram — assemblies, kits and options
— 4124 640 0101 Gearhead Fitment / change note → 1
— 4124 640 7300 Set of pinions 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 74 / FS 76 / FS 81

FS 74, FS 76, FS 81: gearhead assembly numbers stay unchanged

4130 640 0100 and 4124 640 0101 retain their numbers, with different factory-stock rules.

  • The page10 summary labels 4130 640 0100 Gearhead FS 74 and 4124 640 0101 Gearhead FS 76, 81. Both retain their numbers and include the plug and output bearing rows; other parts remain as before. The two complete gearheads are not asserted interchangeable.
  • Unmodified FS 74 gearhead 4130 640 0100 is supplied until existing factory stocks are exhausted; only the modified FS 76/81 gearhead 4124 640 0101 is factory-available. The common number alone does not establish which revision a used assembly contains.
  • The narrative heading names FS 74/76, while the summary also names FS 81. Preserve FS 81 only as the explicit assembly-row application; do not extrapolate the plug production serial, bearing production rule or AutoCut mounting instruction to FS 81 solely from this row.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 9 · TI 1/1994, p. 10 — FS 74, FS 76, FS 81: gearhead assembly numbers stay unchanged.

Part numbers (2)
  • 4130 640 0100 — FS74 complete gearhead; unchanged numberunchanged-number · FS 74, FS 76, FS 81: gearhead assembly numbers stay unchanged
  • 4124 640 0101 — FS76/81 complete gearhead; unchanged numberunchanged-number · FS 74, FS 76, FS 81: gearhead assembly numbers stay unchanged

Wrong number or missing part for the FS 81? Report a correction →