Stihl 4126 · Section M · 12 of 14 · 22 parts
Deflector
Fits FS 88.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (22)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4119 710 8103 | Deflector | 1 |
| 2 | 0000 716 3101 | Backing plate | 1 |
| 3 | 9022 373 1025 | Spline screw IS-M5x23 | 4 |
| 4 | 4119 716 3203 | Skirt | 1 |
| 5 | 4119 710 6000 | Blade | 1 |
| 6 | 4118 713 4105 | Blade | 1 |
| 7 | 9074 478 4125 | Pan head self-tapping screw IS-5x14 | 2 |
| 8 | not sold separately | O-ring 4x2 not available as a separate item | 4 |
| 9 | 0000 716 3100 | Backing plate | 1 |
| 10 | 9074 478 2970 | Pan head self-tapping screw IS-P4x10 | 2 |
| 11 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 4 |
| 12 | 9022 341 0980 | Spline screw IS-M5x16 | 4 |
| 13 | 4133 007 1007 | Deflector kit | 1 |
| 14 | 4133 007 1008 | Deflector kit | 1 |
| 15 | 4133 713 4110 | Blade | 1 |
| 16 | 9074 478 4405 | Pan head self-tapping screw IS-P6x14 | 1 |
| 17 | 4117 710 8200 | Limit stop Ø 200 Fitment / change note → | 1 |
| 18 | not sold separately | O-ring 4x2 not available as a separate item | 3 |
| 19 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 3 |
| 20 | 9022 341 0980 | Spline screw IS-M5x16 | 3 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4119 007 1027 | Deflector kit | 1 |
| — | 0000 007 1300 | Set of O-rings N 4x2-EPDM70 | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 88 / FS 108
FS 88 / 108: seven listed cutting heads
Historical approval names and numbers remain distinct; guard and line requirements still apply.
- Page 2 drawings and keys 1–7 match the seven listed heads. This does not establish compatibility of later heads sharing a name. Nylon-line specifications are separately modelled from page 6.
- Universal deflector requires its skirt before using cutting heads; a line-limiting blade must always be fitted before using heads with nylon line. Do not treat a head part number as a complete safe mounting kit. Metal cutting tools must not be fitted or used on loop-handle versions.
- Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.
Source: TI 37/1994, p. 2 · TI 37/1994, p. 4 · TI 37/1994, p. 6 — FS 88 / 108: seven listed cutting heads.
Part numbers (7)
- 4002 710 2140 — 1 Supercut 2-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
- 4002 710 2162 — 2 Supercut 20-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
- 4002 710 2108 — 3 Autocut 25-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
- 4002 710 2107 — 4 Autocut 30-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
- 4002 710 2120 — 5 Polymatic 30-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
- 4111 710 2100 — 6 Polycut 40-3 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
- 4001 713 2100 — 7 Fixed Line Headhistorical listed item · FS 88 / 108: seven listed cutting heads
Service note · FS 88 / FS 108
FS 88 / 108: deflector kits and mandatory skirt
A deflector alone is not the complete kit with blade and mounting hardware.
- Deflector for cutting heads (8) and universal deflector (9) screw rigidly to the gearhead flange in a fixed position relative to the tool. Skirt (10) extends universal deflector (9) and MUST ALWAYS be fitted before using cutting heads. Line-limiting blade (11) MUST ALWAYS be fitted before using heads with nylon line; drawing shows it on both depicted guard configurations.
- Universal kit 4119 007 1013 includes deflector, skirt, line-limiting blade and mounting hardware; 4119 713 4500 is DEFLECTOR ONLY. Cutting-head kit 4133 007 1002 includes deflector, line-limiting blade and hardware; 4133 710 8101 is DEFLECTOR ONLY.
- Circular-saw-blade limit stop 4117 710 8200 includes mounting hardware. It does not authorize metal cutting tools on loop-handle versions; that prohibition remains. No unprinted kit component numbers inferred.
- Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.
Source: TI 37/1994, p. 2 · TI 37/1994, p. 4 · TI 37/1994, p. 6 — FS 88 / 108: deflector kits and mandatory skirt.
Part numbers (5)
- 4119 007 1013 — Universal deflector complete kithistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
- 4119 713 4500 — Universal deflector onlyhistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
- 4133 007 1002 — Cutting-head deflector kithistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
- 4133 710 8101 — Cutting-head deflector onlyhistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
- 4117 710 8200 — Circular-saw limit stop with hardwarehistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
Service note · FS 88 / FS 108
FS 88 / 108: line sizes and Polycut blades
Red 2.7 mm line is listed only for Fixed Line Head and Polycut 40-3.
- Orange 2.4 mm (0.095 in) line applies to Supercut 2-2, Supercut 20-2, Autocut 25-2, Autocut 30-2, Polymatic 30-2, Fixed Line Head and Polycut 40-3. The five numbered packages contain 15, 44, 87, 261 and 434 m respectively. Printed feet are retained as historical rounded labels, not precision conversions.
- Red 2.7 mm (0.105 in) line applies ONLY to Fixed Line Head and Polycut 40-3, in 10.7 m or 72.0 m packages. Do not extend the red-line application to all seven heads. Package lengths are not installed line lengths.
- Polycut 40-3 thermoplastic-blade set 4111 007 1001 contains 12 blades, NOT twelve blades installed at once. These are not the prohibited metal cutting tools.
- Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.
Source: TI 37/1994, p. 2 · TI 37/1994, p. 6 — FS 88 / 108: line sizes and Polycut blades.
Part numbers (8)
- 0000 930 2243 — Orange 2.4 mm line, 15 m (50 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
- 0000 930 2244 — Orange 2.4 mm line, 44 m (143 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
- 0000 930 2245 — Orange 2.4 mm line, 87 m (285 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
- 0000 930 2246 — Orange 2.4 mm line, 261 m (855 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
- 0000 930 2247 — Orange 2.4 mm line, 434 m (1425 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
- 0000 930 2218 — Red 2.7 mm line, 10.7 m (35 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
- 0000 930 2224 — Red 2.7 mm line, 72.0 m (235 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
- 4111 007 1001 — Set of 12 thermoplastic blades for Polycut 40-3historical listed item · FS 88 / 108: line sizes and Polycut blades
Wrong number or missing part for the FS 88? Report a correction →