Stihl 4128 · Section E · 5 of 21 · 15 parts
Fuel tank
Fits FS 400, FS 450, FS 480.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (15)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4128 350 0401 | Fuel tank | 1 |
| 2 | 4128 358 0800 | Hose | 1 |
| 3 | 0000 350 3506 | Pickup body | 1 |
| 4 | 0000 989 0516 | Grommet | 1 |
| 5 | not sold separately | Hose 2.2x5.4x155 mm, R1 not available as a separate item | 1 |
| 6 | 0000 351 3200 | Sleeve | 4 |
| 7 | 1125 084 8900 | Grommet | 4 |
| 8 | 4128 021 2800 | Insert Fitment / change note → | 1 |
| 9 | 4128 350 0505 | Filler cap | 1 |
| 10 | 0000 350 0900 | Rope | 1 |
| 11 | 0000 353 0800 | Filler cap retainer | 1 |
| 12 | 4128 352 6500 | Guard plate | 1 |
| 13 | 0000 951 1102 | Screw IS-D5x26 | 4 |
| 14 | 0000 967 3693 | Warning pictogram Filler cap | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 930 2802 | Hose 2.2x5.4 mm x 1 m, R1 not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 120 / FS 200 / FS 350 / FS 400 / FS 450
FS120/200/350/400/450: ignition, plugs and fuel capacities
305 mm ignition lead applies only to FS400/450.
- Ignition module has INTEGRAL ELECTRONIC SPEED LIMITER. Suppressed spark plugs listed are Bosch WSR6F, NGK BPMR7A OR Champion RCJ6Y; these are alternatives, not a requirement to combine them. No plug gap, torque or ignition timing is specified here.
- Ignition lead length305 mm (12 in) is explicitly FS400/450 ONLY. It is not an ignition-module part number or a length requirement for FS120/200/350.
- Transparent tank enables fuel-level identification. Capacity FS120/200/350 =0.64 l (1.35 US pt); FS400/450 =0.68 l (1.43 US pt). No fuel mixture specification or tank interchange is established on these pages.
- Historical TI42/1997 configurations only, not all later versions sharing a model name. No hardware operation was performed. No part interchange or numeric serial cutoff is established.
Source: TI 42/1997, p. 3 · TI 42/1997, p. 4 — Section1 fuel-system description; sections2.1.2 tank capacity and2.1.3 ignition.
No additional parts-table entry added.
Historical fitment · FS 450
FS 450: heat shield introduction, earlier-unit retrofit and temporary tank packaging
From serial 1 40 379 982; shield fits earlier delivered FS 450 units, but bundled supply with the unchanged-number tank was time-limited.
1 40 379 982 — FS 450 heat-shield production introduction; retrofit also permitted for all FS 450 units delivered before this bulletin.
- ALL FS 450 clearing saws from machine number 1 40 379 982 are equipped with heat shield 4128 021 2800. This is series 4128, model FS 450 only; the shared catalog sheet does not add FS 400 or FS 480, and reused shield numbers do not add SP models.
- The shield improves thermal insulation. Figure 256TI002 KN places shield (1) BETWEEN the crankcase and fuel tank, showing its orientation and mounting alignment in the exploded stack. No dimensions, tightening torque, material specification or complete disassembly procedure are supplied; this is not a fabrication template.
- Service note, effective immediately in this 1998 bulletin: FS 450 machines EQUIPPED WITH THIS HEAT SHIELD may be supplied to customers. The shield can be installed in ALL FS 450 units delivered to date. This is historical delivery and retrofit guidance, not a claim that this alone satisfies present-day delivery requirements or a documented recall of all unmodified units.
- Parts availability: heat shield 4128 021 2800 will be supplied together with fuel tank 4128 350 0400 for a LIMITED PERIOD. Summary prints 4128 350 0400 in BOTH original and new columns; item 1 shield has --- original and 4128 021 2800 new. Remark 1 says only the modified version is available from the factory and explicitly points back to Parts availability. Do not turn the temporary bundle into a permanent tank-kit contents guarantee or invent a separate revised tank number. All other parts as before.
- Retained FS 400/450/480 E sheet calls the exact shield number an Insert at position 8, but lists fuel tank 4128 350 0401 at position 1, not the TI 0400. This note binds the exact FS 450 shield row; the later tank-number relationship is UNESTABLISHED and no 0400-to-0401 supersession is inferred. Original catalog rows remain unchanged.
- Last TI20.98 is a bibliographic pointer, not a missing prerequisite for this self-contained change. Historical factory supply is not current stock, universal fitment or a verified physical installation. No hardware operation was performed.
Source: TI 31/1998, p. 1 — Complete page: serial introduction, illustrated location, immediate service/retrofit guidance, temporary packaging, summary and remark.
Part numbers (2)
- 4128 350 0400 — Fuel tank; same number in original/new columnsModified supply only; shield bundled for limited period · FS 450 only; historical availability qualification
- 4128 021 2800 — Heat shield; table item 1 / figure callout 1New; earlier FS 450 retrofit permitted · FS 450 only; between crankcase and tank
Wrong number or missing part for the FS 400, FS 450, FS 480? Report a correction →