← Edgers & other equipment · series 4130

Stihl 4130 · Section C · 3 of 14 · 36 parts

Muffler, Shroud

Fits FS 36, FS 40, FS 44.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220222324252627282933031440566789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (36)

PosPart numberDescriptionQty
1 4130 149 0600 Muffler gasket 1
2 4130 140 0605 Muffler 1
2 4130 140 0600 Muffler 1
3 4130 141 9000 Screen 1
4 4130 145 3000 NLA Screen frame 1
5 9099 021 2360 Self-tapping screw 3.5x9.5 2
6 9075 478 4265 Pan head self-tapping screw IS-D5x60 4
7 4130 129 0900 Gasket 1
8 4130 120 0601 Carburetor WT-160B 1
8 4130 120 0603 Carburetor WT-492A 1
9 4130 123 7300 Lever 1
10 4130 350 0404 Fuel tank 1
11 not sold separately Hose 3.1x5.7x260 mm, R3 not available as a separate item 1
12 not sold separately Hose 2.2x5.4x35 mm, R1 not available as a separate item 1
13 0000 350 3502 Pickup body 1
14 4223 353 9201 Grommet 1
15 4223 350 5802 Tank vent 1
16 0000 989 0516 Grommet Fitment / change note → 2
17 4130 350 0507 Filler cap 1
18 0000 350 0900 Rope 1
19 0000 353 0600 Hook 1
20 0000 359 1240 Sealing ring 1
22 1122 353 9100 Connector 1
23 4114 353 1600 Valve → replaced by 1128 353 1600 TI 25/1996 1
24 4130 350 6200 Fuel pump → replaced by 4128 120 0100 TI 6/2009 1
25 not sold separately Hose 2.2x5.4x85 mm, R1 not available as a separate item 1
26 4130 180 1101 Throttle cable 1
27 4130 084 0901 Shroud 1
28 9075 478 4155 Pan head self-tapping screw IS-D5x24 4
29 4130 124 0800 Filter 1
30 4130 141 0500 Filter cover 1
31 4130 141 8100 Screw 1
40 4130 180 1105 Throttle cable 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2803 Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption 1
— 0000 930 2802 Hose 2.2x5.4 mm x 1 m, R1 not illustratedoption 1
— 4130 007 1050 Set of gaskets 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 36 / FS 40 / FS 44

FS 36/FS 40/FS 44: same-number tank and longer fuel hoses

Three grommets and squared hose ends; tank number does not identify its version.

  • All tank-wall hoses A are retained by grommets B, 0000 989 0516, THREE per tank. Former pointed ends C become longer, squared ends D. All modified parts in section 1.1 can be installed in older models; this does not remove the separate fan-housing mounting restriction in section 1.2.
  • Lubricate each grommet with a drop of oil before insertion in the tank wall, then coat the hose with oil and push it through into the tank. Pay attention to hose lengths; this TI gives no numeric lengths. Do not import current bulk-hose cut lengths as the historical lengths.
  • Tank 4130 350 0416 includes items 1–4: three grommets and hoses 4130 358 0700, 4130 358 7600 and 4130 358 7601. All tank/hose numbers remain unchanged. Old hoses supplied until factory stocks exhausted; all other parts as before. Tank may arrive original, with grommets, OR with latest mounting modification during changeover.
  • Grommet change was implemented some time previously; summary says introduction in progress. No serial cutoff for either tank change. Current exact-model IPL lists tank 4130 350 0404 and bulk/cut hoses, not the historical 0416 assembly; retain this edition difference without inventing a supersession.
  • Historical TI19/1996 evidence only; no calendar introduction date or current stock status inferred. FS 44 gearhead changes do not apply to FS 36/40 or FC 44. No hardware operation was performed.

Source: TI 19/1996, p. 1 · TI 19/1996, p. 2 — same-number tank and longer fuel hoses.

Part numbers (5)
  • 4130 350 0416 — Fuel tank including items1–4Same number for three possible configurations · FS 36/40/44 historical tank assembly
  • 0000 989 0516 — Grommet, three per tankNew hose retention · FS 36/40/44 historical tank assembly
  • 4130 358 0700 — Hose, item2Same number, longer squared end · FS 36/40/44 historical tank assembly
  • 4130 358 7600 — Hose, item3Same number, longer squared end · FS 36/40/44 historical tank assembly
  • 4130 358 7601 — Hose, item4Same number, longer squared end · FS 36/40/44 historical tank assembly

Historical fitment · FS 36 / FS 40 / FS 44

FS 36/FS 40/FS 44: conditional tank mounting-hole enlargement

Old tank in modified fan housing: 7.5 mm holes; numbers stay unchanged.

  • Modified fan housing has an integrally molded sleeve on each common mounting boss; modified tank has correspondingly larger mounting holes. Drawing 342TI008 arrows identify the bosses, not fuel-hose grommet holes.
  • ONLY when fitting an unmodified tank into a modified fan housing, the tank MOUNTING holes must be drilled to 7.5 mm (19/64 in.). This is conditional compatibility, not unrestricted interchangeability or an instruction to enlarge fuel-hose holes.
  • Both tank changes and the fan-housing change retain their part numbers despite limited interchangeability. The TI supplies no fan-housing part number. Do not treat current IPL fan housing 4130 084 1002 as a newly introduced number.
  • Each modified fan housing is to include separate tank-upgrade instructions. That exact insert is not established in the bounded available manual-cover and document-filename inventory; the TI supplies the diameter and condition but not a complete insert. No drill setup or further procedure fabricated.
  • Historical TI19/1996 evidence only; no calendar introduction date or current stock status inferred. FS 44 gearhead changes do not apply to FS 36/40 or FC 44. No hardware operation was performed.

Source: TI 19/1996, p. 1 · TI 19/1996, p. 2 — conditional tank mounting-hole enlargement.

Part numbers (1)
  • 4130 350 0416 — Fuel tankUnchanged number; inspect mounting configuration · FS 36/40/44

Wrong number or missing part for the FS 36, FS 40, FS 44? Report a correction →