← Edgers & other equipment · series 4133

Stihl 4133 · Section J · 8 of 16 · 30 parts

Handle

Fits FS 72, FS 74, FS 76.

Parts diagrams →

Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141415161718192202121222334566789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (30)

PosPart numberDescriptionQty
1 4126 791 0821 Handle molding, outer 1
1 4123 791 0801 Handle molding, outer 1
2 4126 182 4506 Torsion spring 1
3 4126 182 0806 Lockout lever Fitment / change note → 1
4 4126 182 6210 Collar screw 1
5 4126 790 1102 Handle molding, inner Fitment / change note → 1
5 4123 790 1102 Handle molding, inner Fitment / change note → 1
6 4126 791 5300 Connector tag 2
7 4126 182 1705 Slide control 1
8 4126 182 4705 Detent spring 1
9 4126 182 6205 Collar screw 1
10 4126 182 4505 Torsion spring 1
11 9417 003 7510 Push nut 1
12 4126 182 1007 Throttle trigger Fitment / change note → 1
13 4133 791 9400 Hose clamp 2
13 4123 791 9400 Hose clamp 2
14 4126 792 6100 Square washer 4
15 9022 341 0980 Spline screw IS-M5x16 2
16 9074 478 3065 Pan head self-tapping screw IS-P4x19 4
17 4126 182 4507 Torsion spring Fitment / change note → 1
18 4133 180 1105 Throttle cable 1
19 not sold separately Lead 480 mm / 18.9'' 1
20 not sold separately Lead 565 mm / 22.2'' 1
21 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 4
22 0751 030 8470 Grommet no longer available from factory 3
23 not sold separately Hose 170 mm / 6 3/4'' 1
Not numbered on the diagram — assemblies, kits and options
— 4133 790 1301 Control handle Fitment / change note → 1
— 4123 790 1313 Control handle Fitment / change note → 1
— 0751 010 1110 Lead 10 m / 33' not illustratedoption 1
— 4203 711 7201 Hose 960 mm / 37 13/16'' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 72 / FS 74 / FS 76

FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions

Spring 4126 182 4507 requires the new throttle trigger AND matching new inner molding.

  • This change is for machines with LOOP handles. Except for the new torsion spring, the new parts may be fitted in the original control handle. Spring 4126 182 4507 (item5) may be fitted to the original handle ONLY together with new throttle trigger 4126 182 1007 (item6) and the new model-correct inner molding (item3 or4).
  • The original versions of these parts cannot be used individually in the modified handle. Do not flatten this to bidirectional individual interchange or permit spring-only retrofit. The exploded drawing identifies inner molding3/4, spring5, trigger6 and interlock7.
  • Throttle trigger 4126 182 1006 → 4126 182 1007; interlock lever 4126 182 0805 → 4126 182 0806; FS72/74 inner molding 4126 790 1101 → 4126 790 1102; FS76 inner molding 4123 790 1101 → 4123 790 1102. Original individual versions are no longer factory-available. All other parts remain as before.
  • Production thresholds: FS 72 from X 24 956 489; FS 74 from X 24 974 840; FS 76 from X 24 958 612. These are exact model-conditioned changes, not general model-identification intervals or thresholds for the separately listed FS86/96/106 spare-handle row.
  • The screws joining the two control-handle halves now tighten to 2.5 Nm (1.8 lbf ft). This is not the bike-handle grip screw torque, support clamp torque or a general fastener setting. The modification also applies to loop-handle conversion kits for bike-handle FS 74 and FS 76.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions.

Part numbers (9)
  • 4126 182 4507 — Additional torsion spring; grouped retrofit onlyconditional-component · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4126 182 1006 — Original throttle triggeroriginal · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4126 182 1007 — New throttle triggerreplacement · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4126 182 0805 — Original throttle interlockoriginal · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4126 182 0806 — New throttle interlockreplacement · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4126 790 1101 — Original FS72/74 inner moldingoriginal · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4126 790 1102 — New FS72/74 inner moldingreplacement · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4123 790 1101 — Original FS76 inner moldingoriginal · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions
  • 4123 790 1102 — New FS76 inner moldingreplacement · FS 72, FS 74, FS 76: control-handle retrofit has grouped-part restrictions

Service note · FS 74

FS 74: loop-handle kit keeps number 4133 007 1011

Only modified kits are available; includes control handle4133 790 1301 and matching controls.

  • Page12 footnote2 assigns loop-handle kit 4133 007 1011 specifically to FS 74. Its number is unchanged; it includes item1 (complete control handle 4133 790 1301), item3 (inner molding 4126 790 1102) and items5–7 (spring, trigger and interlock). The table lists these inclusions, not extra duplicate loose parts beyond the complete handle.
  • Only the modified kit and complete handle are factory-available. The modification applies when converting a bike-handle FS 74 to a loop handle; it is not the FS 76 kit 4133 007 1020. The original kit number alone does not prove the contents have the new controls.
  • New spring4126 182 4507 requires the new trigger4126 182 1007 and inner molding4126 790 1102 for an old-handle retrofit; old components cannot individually enter the modified handle. Interlock changes to4126 182 0806. Control-half screws:2.5 Nm (1.8 lbf ft). FS74 production change starts at X 24 974 840; no retrospective kit manufacture date is inferred.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 74: loop-handle kit keeps number 4133 007 1011.

Part numbers (6)
  • 4133 007 1011 — Unchanged-number FS74 loop-handle conversion kitkit · FS 74: loop-handle kit keeps number 4133 007 1011
  • 4133 790 1301 — Complete control handle, item1included-assembly · FS 74: loop-handle kit keeps number 4133 007 1011
  • 4126 790 1102 — New inner molding, item3included-component · FS 74: loop-handle kit keeps number 4133 007 1011
  • 4126 182 4507 — New torsion spring, item5included-component · FS 74: loop-handle kit keeps number 4133 007 1011
  • 4126 182 1007 — New throttle trigger, item6included-component · FS 74: loop-handle kit keeps number 4133 007 1011
  • 4126 182 0806 — New interlock, item7included-component · FS 74: loop-handle kit keeps number 4133 007 1011

Service note · FS 76

FS 76: loop-handle kit keeps number 4133 007 1020

Only modified kits are available; complete handle4123 790 1313 uses the4123 inner molding.

  • Page12 footnote3 assigns both loop-handle kit 4133 007 1020 and complete control handle 4123 790 1313 to FS 76. Both keep their numbers; only modified versions are factory-available. The kit includes item2 (complete handle) and items4–7; the complete handle includes items4–7. These are inclusion relationships, not duplicate required loose parts.
  • Item4 is inner molding 4123 790 1102 (replaces4123 790 1101), not the4126 molding used for FS72/74. Items5–7 are spring4126 182 4507, trigger4126 182 1007 and interlock4126 182 0806. Original individual parts are no longer factory-available; other parts remain unchanged.
  • The kit converts bike-handle FS76 to loop handle. Spring retrofit to an old handle requires the new trigger and correct new inner molding together; original components cannot individually enter the modified handle. Control-half screws:2.5 Nm (1.8 lbf ft). FS76 production threshold:X 24 958 612; the unchanged kit/handle number does not identify an old assembly revision.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 76: loop-handle kit keeps number 4133 007 1020.

Part numbers (7)
  • 4133 007 1020 — Unchanged-number FS76 loop-handle conversion kitkit · FS 76: loop-handle kit keeps number 4133 007 1020
  • 4123 790 1313 — Unchanged-number FS76 complete control handle, item2included-assembly · FS 76: loop-handle kit keeps number 4133 007 1020
  • 4123 790 1101 — Original FS76 inner molding, item4original · FS 76: loop-handle kit keeps number 4133 007 1020
  • 4123 790 1102 — New FS76 inner molding, item4included-component · FS 76: loop-handle kit keeps number 4133 007 1020
  • 4126 182 4507 — New torsion spring, item5included-component · FS 76: loop-handle kit keeps number 4133 007 1020
  • 4126 182 1007 — New throttle trigger, item6included-component · FS 76: loop-handle kit keeps number 4133 007 1020
  • 4126 182 0806 — New interlock, item7included-component · FS 76: loop-handle kit keeps number 4133 007 1020

Service note · FS 72 / FS 74 / FS 86 / FS 96 / FS 106

FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment

4133 790 1301 retains its number; page12 footnote4 specifies the five named models.

  • Complete control handle 4133 790 1301 (item1) keeps its number and is assigned by footnote4 to FS 72, FS 74, FS 86, FS 96 and FS 106. Only the modified assembly is factory-available. FS 81 shares a catalog sheet with FS86 but is NOT in this source row; FS76 uses the separate4123 790 1313 assembly.
  • The handle includes items3 and5–7: new inner molding4126 790 1102 (replaces4126 790 1101), additional spring4126 182 4507, new trigger4126 182 1007 and new interlock4126 182 0806. Original individual molding/trigger/interlock versions are no longer factory-available. Other parts remain as before.
  • Page11 group restriction accompanies this table: a spring retrofit to an original handle requires the new trigger AND new inner molding together; original components cannot be installed individually in the modified handle. Control-half screws now2.5 Nm (1.8 lbf ft). No production thresholds are given for FS86, FS96 or FS106; do not copy the FS72/74/76 thresholds onto them.
  • FS72 starts the control change at X 24 956 489 and FS74 at X 24 974 840. The separate conversion-kit footnotes assign4133 007 1011 to FS74 and4133 007 1020 to FS76; they do not establish conversion kits for every model in this complete-handle row.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment.

Part numbers (6)
  • 4133 790 1301 — Complete modified control handle; unchanged number, five named modelsunchanged-number · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 790 1101 — Original inner molding, item3original · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 790 1102 — New inner molding, item3included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 182 4507 — Torsion spring, item5included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 182 1007 — New trigger, item6included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 182 0806 — New interlock, item7included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment

Wrong number or missing part for the FS 72, FS 74, FS 76? Report a correction →