Stihl 4133 · Section K · 9 of 16 · 11 parts
Loop handle
Fits FS 72, FS 74, FS 76.
Historical fitment & changes (7) — includes parts and conditions not shown on this drawing.
Parts (11)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4130 790 1315 | Loop handle | 1 |
| 2 | 4130 790 8450 | Barrier bar | 1 |
| 3 | 9222 068 0900 | Square nut M6 | 2 |
| 4 | 9022 341 1370 | Spline screw IS-M6x30 | 2 |
| 5 | 4123 791 7400 | Clamp | 2 |
| 6 | 9291 021 0140 | Washer 6.4 | 2 |
| 7 | 9022 341 1350 | Spline screw IS-M6x25 | 2 |
| 8 | 4121 791 7200 | Sleeve Fitment / change note → | 1 |
| 10 | 4123 790 1300 | Loop handle Fitment / change note → | 1 |
| 11 | 4123 791 7400 | Clamp | 2 |
| 12 | 9022 341 1260 | Spline screw IS-M6x12 | 2 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 74
FS 74: loop-handle kit keeps number 4133 007 1011
Only modified kits are available; includes control handle4133 790 1301 and matching controls.
- Page12 footnote2 assigns loop-handle kit 4133 007 1011 specifically to FS 74. Its number is unchanged; it includes item1 (complete control handle 4133 790 1301), item3 (inner molding 4126 790 1102) and items5–7 (spring, trigger and interlock). The table lists these inclusions, not extra duplicate loose parts beyond the complete handle.
- Only the modified kit and complete handle are factory-available. The modification applies when converting a bike-handle FS 74 to a loop handle; it is not the FS 76 kit 4133 007 1020. The original kit number alone does not prove the contents have the new controls.
- New spring4126 182 4507 requires the new trigger4126 182 1007 and inner molding4126 790 1102 for an old-handle retrofit; old components cannot individually enter the modified handle. Interlock changes to4126 182 0806. Control-half screws:2.5 Nm (1.8 lbf ft). FS74 production change starts at X 24 974 840; no retrospective kit manufacture date is inferred.
- Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.
Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 74: loop-handle kit keeps number 4133 007 1011.
Part numbers (6)
- 4133 007 1011 — Unchanged-number FS74 loop-handle conversion kitkit · FS 74: loop-handle kit keeps number 4133 007 1011
- 4133 790 1301 — Complete control handle, item1included-assembly · FS 74: loop-handle kit keeps number 4133 007 1011
- 4126 790 1102 — New inner molding, item3included-component · FS 74: loop-handle kit keeps number 4133 007 1011
- 4126 182 4507 — New torsion spring, item5included-component · FS 74: loop-handle kit keeps number 4133 007 1011
- 4126 182 1007 — New throttle trigger, item6included-component · FS 74: loop-handle kit keeps number 4133 007 1011
- 4126 182 0806 — New interlock, item7included-component · FS 74: loop-handle kit keeps number 4133 007 1011
Service note · FS 76
FS 76: loop-handle kit keeps number 4133 007 1020
Only modified kits are available; complete handle4123 790 1313 uses the4123 inner molding.
- Page12 footnote3 assigns both loop-handle kit 4133 007 1020 and complete control handle 4123 790 1313 to FS 76. Both keep their numbers; only modified versions are factory-available. The kit includes item2 (complete handle) and items4–7; the complete handle includes items4–7. These are inclusion relationships, not duplicate required loose parts.
- Item4 is inner molding 4123 790 1102 (replaces4123 790 1101), not the4126 molding used for FS72/74. Items5–7 are spring4126 182 4507, trigger4126 182 1007 and interlock4126 182 0806. Original individual parts are no longer factory-available; other parts remain unchanged.
- The kit converts bike-handle FS76 to loop handle. Spring retrofit to an old handle requires the new trigger and correct new inner molding together; original components cannot individually enter the modified handle. Control-half screws:2.5 Nm (1.8 lbf ft). FS76 production threshold:X 24 958 612; the unchanged kit/handle number does not identify an old assembly revision.
- Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.
Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 76: loop-handle kit keeps number 4133 007 1020.
Part numbers (7)
- 4133 007 1020 — Unchanged-number FS76 loop-handle conversion kitkit · FS 76: loop-handle kit keeps number 4133 007 1020
- 4123 790 1313 — Unchanged-number FS76 complete control handle, item2included-assembly · FS 76: loop-handle kit keeps number 4133 007 1020
- 4123 790 1101 — Original FS76 inner molding, item4original · FS 76: loop-handle kit keeps number 4133 007 1020
- 4123 790 1102 — New FS76 inner molding, item4included-component · FS 76: loop-handle kit keeps number 4133 007 1020
- 4126 182 4507 — New torsion spring, item5included-component · FS 76: loop-handle kit keeps number 4133 007 1020
- 4126 182 1007 — New throttle trigger, item6included-component · FS 76: loop-handle kit keeps number 4133 007 1020
- 4126 182 0806 — New interlock, item7included-component · FS 76: loop-handle kit keeps number 4133 007 1020
Service note · FS 74 / FS 76 / FS 88 / FS 108
FS 74/76/88/108 normal loop handles: barrier conversion kit 1030
Kit includes shoulder strap, deflector, barrier bar and sleeve-use instruction sheet.
- Kit 4130 007 1030 converts FS 74, FS 76, FS 88 and FS 108 NORMAL LOOP HANDLES to loop handles with barrier bar. It is not the discontinued bike-handle-to-loop kits described in section 2.
- Page 2 lists a shoulder strap, deflector, barrier bar and instruction sheet on sleeve 4121 791 7200. After conversion, grass cutting blades and brush knives may be used WITH deflector 4119 713 4500; the deflector condition is not waived by owning the kit.
- Page 8 lists kit 1030 for FS 74 R, 76 R, 88 R and 108 R, consisting of sleeve 9, strap 41, deflector sub-kit 42 and bar 30. See the reviewed complete-accessory-versus-sub-kit note for ordering numbers and limits; the machine-specific sub-kit bill of materials remains a documented source gap.
- Historical TI 39/1995 guidance for its specified configurations, not universal attachment approval, present stock or verified physical interchange. No hardware operation was performed.
- These exact-model IPLs are navigation aids, not evidence of an installed revision. Shared FS 72/74/76 sheet does NOT extend the conversion to FS 72. Only the four named normal-loop-handle configurations are assigned this kit.
Source: TI 39/1995, p. 2 · TI 39/1995, p. 8 — FS 74/76/88/108 normal loop handles: barrier conversion kit 1030.
Part numbers (3)
- 4130 007 1030 — Normal-loop to barrier-bar conversion kitSource-listed component; restrictions in conditions · FS74/76/88/108 normal loop handles: barrier conversion kit1030
- 4121 791 7200 — Sleeve addressed by supplied instruction sheetSource-listed component; restrictions in conditions · FS74/76/88/108 normal loop handles: barrier conversion kit1030
- 4119 713 4500 — Required universal deflectorSource-listed component; restrictions in conditions · FS74/76/88/108 normal loop handles: barrier conversion kit1030
Conditional replacement · FS 74 / FS 76 / FS 88 / FS 108
FS 74/76/88/108 R: older replacement versus production choice
Original and new handle assignments retain production, replacement and variant restrictions.
- Each model has TWO distinct rows: former handle 1 → handle 6, –/X, remark 2 for older-machine replacement; and former handle 1 → handles 6 OR 7, X/X, remark 3. Do not turn the older-machine row into a blanket production/barrier conversion.
- Source series and tube B: FS 74 R = 4133 / item 32 (4133 711 0212 → 4133 711 0213); FS 76 R = 4133 / item 34 (4124 710 7102 → 4124 710 7103); FS 88 R = 4126 / item 34 (same pair); FS 108 R = 4135 / item 36 (4117 710 7101 → 4117 710 7102).
- Page 5 remark 3 says the new tube is used in production AND replacement, also for bike-handle machines. Section 6 remark 14 says the original item 32/34/36 tubes remain available as spares for OLDER LOOP-HANDLE machines. New-tube cross-configuration use does not erase that old-tube restriction.
- Former handle 1 (4123 790 1300) remains available as spare for other models. Kit 4130 007 1030 is the separate four-model normal-loop-to-barrier accessory discussed on pages 2 and 8, not a new bike-to-loop kit.
- Page 5 A refers to the handle figure on page 4 AND the matching item in section 6; B is a drive-tube item number, not a diameter or complete assembly part number. X/X means standard production AND replacement; –/X means replacement only. Blank tube-number cells with remark 1 mean new instruction label with the SAME tube number, not removal of the tube.
- New handle 6 is 4130 790 1316. Handle 7 is NOT available as a separate item: use handle 6 plus barrier bar 30 (4130 791 4400). Neither assembly choice alone authorizes a cutting tool: the page 2 blade/barrier/universal-deflector restrictions still apply.
- The printed source is December 21, 1995; introduction is in progress with mixed inventories, not a serial cutoff or proof of installed revision. Catalog title says New Zealand only while the printed matrix includes Southeast Asia; territory discrepancy retained. Historical TI 39/1995 guidance, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL navigation only; shared-sheet companion models are NOT added to the source assignment. Printed source series identifiers are retained separately from catalog navigation series.
Source: TI 39/1995, p. 4 · TI 39/1995, p. 5 · TI 39/1995, p. 6 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 5, FS 74/76/88/108 R: older replacement versus production choice; section 6 row/remark joins.
Part numbers (9)
- 4123 790 1300 — Former handle 1Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4130 790 1316 — New loop handle 6Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4130 791 4400 — Barrier bar 30; combine with handle 6 for form 7Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4133 711 0212 — Former tube item 32Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4133 711 0213 — New tube item 32Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4124 710 7102 — Former tube item 34Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4124 710 7103 — New tube item 34Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4117 710 7101 — Former tube item 36Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
- 4117 710 7102 — New tube item 36Source matrix/table component; restrictions in conditions · FS 74/76/88/108 R: older replacement versus production choice
Service note · FS 74 / FS 76 / FS 88 / FS 108
FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit
The four listed components do not turn a deflector sub-kit into the complete conversion.
- Item 40 is deflector kit for cutting tools 4130 007 1030, for FS 74 R, FS 76 R, FS 88 R and FS 108 R. It consists of items 9,41,42,30: sleeve 4121 791 7200, shoulder strap 4130 710 9000, deflector KIT 4119 007 1013 and barrier bar 4130 791 4400.
- Item 42 (4119 007 1013) is a sub-kit, NOT the complete item 40 conversion and NOT the same ordering number as universal deflector 4119 713 4500. Page 2 requires the latter WITH the barrier bar for grass cutting blades or brush knives. The source does not list a complete sub-kit bill of materials here; remark 16 refers to the machine parts list.
- The kit includes the sleeve, but remark 9 limits its use to 24 mm (0.945 in) drive tubes. Page 2 also specifies the kit-supplied sleeve instruction sheet; that separate sheet has not been recovered in the bounded source review.
- This is normal-loop-to-barrier conversion, NOT the discontinued bike-to-loop kits 43–48. The item 40 component list does not add handle 6, arbitrary mounting fasteners or a cutting blade to the package.
- Historical TI 39/1995 guidance dated December 21, 1995, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL links are navigation only, not a verified 1995 kit bill of materials. Shared sheets do NOT add FS 62, FS 72 or FS 180 to these kit assignments. Catalog title New Zealand only conflicts with the printed cover and Southeast Asia matrix entries; territory discrepancy retained.
Source: TI 39/1995, p. 2 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 6, FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit; section 2 stock limits and component-table joins.
Part numbers (6)
- 4130 007 1030 — Complete accessory conversion kit, item 40TI-listed kit or included component; restrictions in conditions · FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit
- 4121 791 7200 — Sleeve, item 9; use only on 24 mm tubeTI-listed kit or included component; restrictions in conditions · FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit
- 4130 710 9000 — Shoulder strap, item 41TI-listed kit or included component; restrictions in conditions · FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit
- 4119 007 1013 — Deflector sub-kit, item 42TI-listed kit or included component; restrictions in conditions · FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit
- 4130 791 4400 — Barrier bar, item 30TI-listed kit or included component; restrictions in conditions · FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit
- 4119 713 4500 — Required universal deflector; page 2TI-listed kit or included component; restrictions in conditions · FS 74/76/88/108 R: complete accessory kit versus deflector sub-kit
Service note · FS 74
FS 74: 25.4 mm bike-to-loop kit 4133 007 1011
Historical model, tube diameter and included-handle distinctions remain explicit.
- Item 47 is for 25.4 mm (1 in) drive tubes on FS 74; includes loop handle 1 (4123 790 1300), NOT metal handle 3. Do not round 25.4 mm to the FS 76 kit diameter or inherit FS 72 from the shared sheet.
- Original bike-handle-to-loop conversion kit supplied only while factory stocks last (remark 4). Section 2 says NO NEW VERSIONS of these kits will be offered; future conversions use individual handle components. This is not withdrawal of accessory kit 4130 007 1030.
- The printed inclusion is not an exhaustive kit bill of materials: remark 16 refers component parts to the parts list for the machine concerned. Retained 01-2012 IPLs are later references, not established 1995 kit-content evidence. Do not fill the historical kit from neighboring drawing rows.
- Historical TI 39/1995 guidance dated December 21, 1995, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL links are navigation only, not a verified 1995 kit bill of materials. Shared sheets do NOT add FS 62, FS 72 or FS 180 to these kit assignments. Catalog title New Zealand only conflicts with the printed cover and Southeast Asia matrix entries; territory discrepancy retained.
Source: TI 39/1995, p. 3 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 6, FS 74: 25.4 mm bike-to-loop kit 4133 007 1011; section 2 stock limits and component-table joins.
Part numbers (2)
- 4133 007 1011 — Original bike-to-loop conversion kitTI-listed kit or included component; restrictions in conditions · FS 74: 25.4 mm bike-to-loop kit 4133 007 1011
- 4123 790 1300 — Included loop handle, item 1TI-listed kit or included component; restrictions in conditions · FS 74: 25.4 mm bike-to-loop kit 4133 007 1011
Service note · FS 76
FS 76: 24 mm bike-to-loop kit 4133 007 1020
Historical model, tube diameter and included-handle distinctions remain explicit.
- Item 48 is for 24 mm (0.945 in) drive tubes on FS 76; includes loop handle 1 (4123 790 1300), NOT metal handle 3. Its diameter matches item 45 but its kit number and handle membership differ; they are NOT interchangeable kit identities.
- Original bike-handle-to-loop conversion kit supplied only while factory stocks last (remark 4). Section 2 says NO NEW VERSIONS of these kits will be offered; future conversions use individual handle components. This is not withdrawal of accessory kit 4130 007 1030.
- The printed inclusion is not an exhaustive kit bill of materials: remark 16 refers component parts to the parts list for the machine concerned. Retained 01-2012 IPLs are later references, not established 1995 kit-content evidence. Do not fill the historical kit from neighboring drawing rows.
- Historical TI 39/1995 guidance dated December 21, 1995, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL links are navigation only, not a verified 1995 kit bill of materials. Shared sheets do NOT add FS 62, FS 72 or FS 180 to these kit assignments. Catalog title New Zealand only conflicts with the printed cover and Southeast Asia matrix entries; territory discrepancy retained.
Source: TI 39/1995, p. 3 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 6, FS 76: 24 mm bike-to-loop kit 4133 007 1020; section 2 stock limits and component-table joins.
Part numbers (2)
- 4133 007 1020 — Original bike-to-loop conversion kitTI-listed kit or included component; restrictions in conditions · FS 76: 24 mm bike-to-loop kit 4133 007 1020
- 4123 790 1300 — Included loop handle, item 1TI-listed kit or included component; restrictions in conditions · FS 76: 24 mm bike-to-loop kit 4133 007 1020
Wrong number or missing part for the FS 72, FS 74, FS 76? Report a correction →