← Edgers & other equipment · series 4133

Stihl 4133 · Section L · 10 of 16 · 35 parts

Bike handle

Fits FS 72, FS 74, FS 76.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415151616171718192202122222324252627272829330456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (35)

PosPart numberDescriptionQty
1 4126 791 1700 Two-handed handle bar 1
2 4126 791 0801 Handle molding, outer 1
3 4126 182 4506 Torsion spring 1
4 4126 182 0800 Lockout lever 1
5 4126 182 6210 Collar screw 1
6 4126 791 0811 Handle molding, inner 1
7 4126 182 1700 Slide control 1
8 4126 182 4700 Detent spring 1
9 4126 182 6200 Collar screw 1
10 4126 442 1600 Contact spring 1
11 4126 182 6210 Collar screw 1
12 4126 182 4500 Torsion spring 1
13 4126 182 1001 Throttle trigger 1
14 4126 442 1610 Contact spring 1
15 9099 021 1890 Self-tapping screw 2.9x25 Fitment / change note → 5
16 9210 260 0700 Hexagon nut M5 2
17 9022 341 1070 Spline screw IS-M5x30 2
18 4121 791 7200 Sleeve Fitment / change note → 1
19 4133 791 7610 Support 1
20 4133 791 0900 Clamp 1
21 4133 791 0905 Clamp 1
22 9022 341 1350 Spline screw IS-M6x25 6
23 4133 180 1115 Throttle cable 1
24 not sold separately Lead 1010 mm / 40'' 1
25 not sold separately Lead 1040 mm / 40.9'' 1
26 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 3
27 0751 030 8470 Grommet no longer available from factory 3
28 not sold separately Hose 755 mm / 29 3/4'' 1
29 not sold separately Handle molding, outer not available as a separate item 1
30 not sold separately Handle molding, inner not available as a separate item 1
Not numbered on the diagram — assemblies, kits and options
— 4133 007 1010 Bike handle kit Fitment / change note → 1
— 4126 790 1303 Control handle 1
— 0751 010 1110 Lead 10 m / 33' not illustratedoption 1
— 4203 711 7201 Hose 960 mm / 37 13/16'' 1
— 4126 790 1350 Handle, left Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 74 / FS 76

FS 74, FS 76: left bike-handle grip supplied as an assembly

4126 790 1350 replaces separate moldings; the two C2.9×25 screws retain their number.

  • The new complete left-hand handle 4126 790 1350 consists of outer molding item1, inner molding item2 and TWO self-tapping C2.9×25 screws 9099 021 1890 (item3). The original outer molding is 4126 791 0805 and inner molding 4126 791 0815.
  • Only the complete new grip is supplied as a spare instead of the two moldings. Original moldings are supplied until factory stocks are exhausted; the new moldings are not available separately. The screw number stays unchanged. The drawing shows the two halves and both screws; no separate new molding numbers are invented.
  • These parts and the support also occur in bike-handle kit 4133 007 1010, which is supplied unmodified until existing factory stocks are exhausted. Introduction is in progress. This section9 grip is not the section10 loop-handle control; do not transfer its 2.5 Nm torque here.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 10 · TI 1/1994, p. 11 — FS 74, FS 76: left bike-handle grip supplied as an assembly.

Part numbers (5)
  • 4126 790 1350 — New complete left-hand grip, includes items1–3replacement-assembly · FS 74, FS 76: left bike-handle grip supplied as an assembly
  • 4126 791 0805 — Original outer grip moldingoriginal · FS 74, FS 76: left bike-handle grip supplied as an assembly
  • 4126 791 0815 — Original inner grip moldingoriginal · FS 74, FS 76: left bike-handle grip supplied as an assembly
  • 9099 021 1890 — Unchanged C2.9×25 self-tapping screw, two per gripretained-component · FS 74, FS 76: left bike-handle grip supplied as an assembly
  • 4133 007 1010 — Bike-handle kit; unmodified stock rulekit · FS 74, FS 76: left bike-handle grip supplied as an assembly

Service note · FS 74 / FS 76 / FS 81 / FS 86 / FS 96 / FS 106 / FS 160 / FS 180

FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection

4126 791 7610 → 4126 791 7611; 24mm tubes require sleeve 4121 791 7200.

  • Modified support 4126 791 7611 (item4) replaces 4126 791 7610 for 25.4 mm (1 in) and 26 mm (approximately 1 1/16 in) drive tubes. For 24 mm (approximately 15/16 in) tubes, fit sleeve 4121 791 7200 (item5). The scan clearly prints 1 1/16, not 11/16; extracted text lost the space.
  • Exact assignment table: FS 76 and FS 81 have 24 mm tubes, sleeve REQUIRED; FS 74 has 25.4 mm, NO sleeve; FS 86, FS 96, FS 106, FS 160 and FS 180 have 26 mm, NO sleeve. These are the listed historical bike-handle configurations, not a universal specification for every variant bearing those model names.
  • Introduction is in progress. Original support stock is supplied only until exhausted. The support is included in bike-handle kit 4133 007 1010, whose unmodified stock is also supplied until exhausted; this kit reference belongs to section9 FS 74/76, not an asserted conversion kit for every model in the diameter table.
  • The figure shows the support and sleeve together with the surrounding clamp pieces. No new part number for those other pieces or clamp torque is supplied; no measured physical fit test is claimed.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 10 · TI 1/1994, p. 11 — FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection.

Part numbers (4)
  • 4126 791 7610 — Original handlebar supportoriginal · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4126 791 7611 — Modified handlebar supportreplacement · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4121 791 7200 — Required sleeve only for the listed 24mm drive tubesconditional-component · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4133 007 1010 — Section9 FS74/76 bike-handle kit, not all table modelskit · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection

Wrong number or missing part for the FS 72, FS 74, FS 76? Report a correction →