← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section N · 13 of 15 · 22 parts

Deflector

Fits FR 108.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110101111121213141515161617181922220333456778899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (22)

PosPart numberDescriptionQty
1 4119 710 8103 Deflector 1
2 0000 716 3101 Backing plate 1
3 9022 373 1025 Spline screw IS-M5x23 4
4 4119 716 3203 Skirt 1
5 4119 710 6000 Blade 1
6 4118 713 4105 Blade 1
7 9074 478 4125 Pan head self-tapping screw IS-5x14 2
8 not sold separately O-ring 4x2 not available as a separate item 4
9 0000 716 3100 Backing plate 1
10 9074 478 2970 Pan head self-tapping screw IS-P4x10 2
11 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 4
12 9022 341 0980 Spline screw IS-M5x16 4
13 4133 007 1007 Deflector kit 1
14 4133 007 1008 Deflector kit 1
15 4133 713 4110 Blade 1
16 9074 478 4405 Pan head self-tapping screw IS-P6x14 1
17 4117 710 8200 Limit stop Ø 200 Fitment / change note → 1
18 not sold separately O-ring 4x2 not available as a separate item 3
19 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 3
20 9022 341 0980 Spline screw IS-M5x16 3
Not numbered on the diagram — assemblies, kits and options
— 4119 007 1027 Deflector kit 1
— 0000 007 1300 Set of O-rings N 4x2-EPDM70 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FR 108

FR 108: seven historically approved cutting heads

Supercut, Autocut, Polymatic, Polycut and Fixed Line Head identifiers; guard and line-size conditions still apply.

  • Page 2 illustration keys 1–7: Supercut 2-2 (4002 710 2142); Supercut 20-2 (4002 710 2162); Autocut 25-2 (4002 710 2108); Autocut 30-2 (4002 710 2107); Polymatic 30-2 (4002 710 2120); Polycut 40-3 (4111 710 2100); Fixed Line Head (4001 713 2100). Numbers obscured in extracted text were checked on the original scan.
  • This brushcutter MUST NOT be used for felling operations. The universal deflector requires its skirt before using cutting heads; a line-limiting blade MUST be fitted for heads using nylon line. Use the head-specific line roster, not a blanket approval of every diameter.
  • The approval is the dated FR 108 instruction, not a claim that every later similarly named head or brushcutter is interchangeable. Source heading says backpack brushcutters, but this bulletin establishes FR 108; no additional model binding is inferred.
  • Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.

Source: TI 4/1995, p. 2 · TI 4/1995, p. 4 · TI 4/1995, p. 6 — seven historically approved cutting heads.

Part numbers (7)
  • 4002 710 2142 — Supercut 2-2historically approved; source key 1 · FR 108; TI 04/1995 conditions
  • 4002 710 2162 — Supercut 20-2historically approved; source key 2 · FR 108; TI 04/1995 conditions
  • 4002 710 2108 — Autocut 25-2historically approved; source key 3 · FR 108; TI 04/1995 conditions
  • 4002 710 2107 — Autocut 30-2historically approved; source key 4 · FR 108; TI 04/1995 conditions
  • 4002 710 2120 — Polymatic 30-2historically approved; source key 5 · FR 108; TI 04/1995 conditions
  • 4111 710 2100 — Polycut 40-3historically approved; source key 6 · FR 108; TI 04/1995 conditions
  • 4001 713 2100 — Fixed Line Headhistorically approved; source key 7 · FR 108; TI 04/1995 conditions

Service note · FR 108

FR 108: metal tools prohibit felling

Circular saw blades are only approved for limbing standing timber up to 8 ft (2.4 m), with the required limit stop.

  • Page 2 illustration keys 8–12: cutting blade 230-4 (4001 713 3801); cutting blade 230-8 (4001 713 3803); brush knife 250-3 (4112 713 4100); circular saw blade 200 scratcher tooth (4112 713 4201); circular saw blade 200 chisel tooth (4112 713 4203).
  • The asterisks attach to BOTH circular saw blades: ONLY approved for limbing standing timber up to 8 ft (2.4 m). The separate bold restriction applies to the brushcutter: MUST NOT be used for felling operations. Page 1 references cutting wild growth, weeds, scrub/shrubs, cutting/thinning young stands and orchard grafting cuts; these general descriptions do not override the specific no-felling and saw-blade restrictions.
  • Limit stop (page 4 key 12) MUST always be fitted before using circular saw blades; it is screwed rigidly to the gearhead flange at a fixed position relative to the cutting tool. Historical approval is conditional, not a universal saw-blade fitment.
  • Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.

Source: TI 4/1995, p. 1 · TI 4/1995, p. 2 · TI 4/1995, p. 4 — metal tools prohibit felling.

Part numbers (5)
  • 4001 713 3801 — Cutting blade 230-4historical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
  • 4001 713 3803 — Cutting blade 230-8historical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
  • 4112 713 4100 — Brush knife 250-3historical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
  • 4112 713 4201 — Circular saw blade 200; scratcher toothhistorical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
  • 4112 713 4203 — Circular saw blade 200; chisel toothhistorical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions

Service note · FR 108

FR 108: mandatory skirt, line blade and saw limit stop

Universal and cutting-head deflector kits differ from bare guards; kit contents and later IPL numbers remain separate.

  • Deflectors for cutting heads (key 8) and universal deflector (key 9) screw rigidly to the gearhead flange at fixed positions. Skirt (key 10) extends universal deflector 9 and MUST always be fitted before using cutting heads. Line-limiting blade (key 11) trims excess nylon line and MUST always be fitted with nylon-line heads. Saw-blade limit stop (key 12) MUST always be fitted for circular saw blades; no-felling and 8 ft limbing restrictions remain.
  • Universal deflector kit 4119 007 1013 includes deflector, skirt, line-limiting blade and mounting hardware. 4119 713 4500 is the deflector ONLY. Cutting-head deflector kit 4133 007 1002 includes deflector, line-limiting blade and mounting hardware; 4133 710 8101 is deflector ONLY. Limit stop 4117 710 8200 includes mounting hardware.
  • Retained 2012 FR 108 sheet N lists kit 4119 007 1027 and deflector 4119 710 8103, and cutting-head kits 4133 007 1007/1008, unlike the 1995 identifiers. Preserve both editions; no undocumented supersession or automatic kit equivalence inferred. Limit-stop number 4117 710 8200 agrees. Source figure keys are not later IPL positions.
  • Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.

Source: TI 4/1995, p. 2 · TI 4/1995, p. 4 · TI 4/1995, p. 6 — mandatory skirt, line blade and saw limit stop.

Part numbers (5)
  • 4119 007 1013 — Universal deflector kitincludes skirt, blade and hardware · FR 108; TI 04/1995 conditions
  • 4119 713 4500 — Universal deflectorbare deflector only · FR 108; TI 04/1995 conditions
  • 4133 007 1002 — Cutting-head deflector kitincludes blade and hardware · FR 108; TI 04/1995 conditions
  • 4133 710 8101 — Cutting-head deflectorbare deflector only · FR 108; TI 04/1995 conditions
  • 4117 710 8200 — Saw-blade limit stopincludes hardware; mandatory with saw blades · FR 108; TI 04/1995 conditions

Wrong number or missing part for the FR 108? Report a correction →