Stihl 4135 · Section M · 12 of 15 · 22 parts
Gear head
Fits FR 108.
Historical fitment & changes (9) — includes parts and conditions not shown on this drawing.
Parts (22)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4135 641 0300 | Gear housing | 1 |
| 2 | 4117 717 2800 | Guard ring | 1 |
| 3 | 4117 642 8200 | E-clip | 1 |
| 4 | 9503 003 0100 | Grooved ball bearing 6000 | 2 |
| 5 | not sold separately | Drive pinion not available as a separate item | 1 |
| 6 | not sold separately | Spur bevel gear not available as a separate item | 1 |
| 7 | 9503 003 5040 | Grooved ball bearing 6000-RS | 1 |
| 8 | 9455 621 0850 | Circlip 10x1 | 1 |
| 9 | 9456 621 2960 | Circlip 26x1.2 | 1 |
| 10 | 4126 642 0600 | Drive shaft | 1 |
| 11 | 9503 003 5190 | Grooved ball bearing 6001-2RS | 1 |
| 12 | 9456 621 3100 | Circlip 28x1.2 | 1 |
| 13 | 4119 713 6500 | Screw plug | 1 |
| 14 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 2 |
| 15 | 0000 958 0503 | Washer | 2 |
| 16 | 4126 710 3800 | Thrust plate | 1 |
| 17 | 4126 713 1600 | Thrust washer | 1 |
| 18 | 4126 713 3100 | Rider plate | 1 |
| 19 | 4126 642 7600 | Collar nut M10x1 l/h thread | 1 |
| 20 | 0781 120 1117 | Gear lubricant 80 g Fitment / change note → option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4135 640 0100 | Gearhead | 1 |
| — | 4117 640 7300 | Set of pinions | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FR 108
FR 108: seven historically approved cutting heads
Supercut, Autocut, Polymatic, Polycut and Fixed Line Head identifiers; guard and line-size conditions still apply.
- Page 2 illustration keys 1–7: Supercut 2-2 (4002 710 2142); Supercut 20-2 (4002 710 2162); Autocut 25-2 (4002 710 2108); Autocut 30-2 (4002 710 2107); Polymatic 30-2 (4002 710 2120); Polycut 40-3 (4111 710 2100); Fixed Line Head (4001 713 2100). Numbers obscured in extracted text were checked on the original scan.
- This brushcutter MUST NOT be used for felling operations. The universal deflector requires its skirt before using cutting heads; a line-limiting blade MUST be fitted for heads using nylon line. Use the head-specific line roster, not a blanket approval of every diameter.
- The approval is the dated FR 108 instruction, not a claim that every later similarly named head or brushcutter is interchangeable. Source heading says backpack brushcutters, but this bulletin establishes FR 108; no additional model binding is inferred.
- Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 2 · TI 4/1995, p. 4 · TI 4/1995, p. 6 — seven historically approved cutting heads.
Part numbers (7)
- 4002 710 2142 — Supercut 2-2historically approved; source key 1 · FR 108; TI 04/1995 conditions
- 4002 710 2162 — Supercut 20-2historically approved; source key 2 · FR 108; TI 04/1995 conditions
- 4002 710 2108 — Autocut 25-2historically approved; source key 3 · FR 108; TI 04/1995 conditions
- 4002 710 2107 — Autocut 30-2historically approved; source key 4 · FR 108; TI 04/1995 conditions
- 4002 710 2120 — Polymatic 30-2historically approved; source key 5 · FR 108; TI 04/1995 conditions
- 4111 710 2100 — Polycut 40-3historically approved; source key 6 · FR 108; TI 04/1995 conditions
- 4001 713 2100 — Fixed Line Headhistorically approved; source key 7 · FR 108; TI 04/1995 conditions
Service note · FR 108
FR 108: metal tools prohibit felling
Circular saw blades are only approved for limbing standing timber up to 8 ft (2.4 m), with the required limit stop.
- Page 2 illustration keys 8–12: cutting blade 230-4 (4001 713 3801); cutting blade 230-8 (4001 713 3803); brush knife 250-3 (4112 713 4100); circular saw blade 200 scratcher tooth (4112 713 4201); circular saw blade 200 chisel tooth (4112 713 4203).
- The asterisks attach to BOTH circular saw blades: ONLY approved for limbing standing timber up to 8 ft (2.4 m). The separate bold restriction applies to the brushcutter: MUST NOT be used for felling operations. Page 1 references cutting wild growth, weeds, scrub/shrubs, cutting/thinning young stands and orchard grafting cuts; these general descriptions do not override the specific no-felling and saw-blade restrictions.
- Limit stop (page 4 key 12) MUST always be fitted before using circular saw blades; it is screwed rigidly to the gearhead flange at a fixed position relative to the cutting tool. Historical approval is conditional, not a universal saw-blade fitment.
- Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 1 · TI 4/1995, p. 2 · TI 4/1995, p. 4 — metal tools prohibit felling.
Part numbers (5)
- 4001 713 3801 — Cutting blade 230-4historical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
- 4001 713 3803 — Cutting blade 230-8historical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
- 4112 713 4100 — Brush knife 250-3historical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
- 4112 713 4201 — Circular saw blade 200; scratcher toothhistorical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
- 4112 713 4203 — Circular saw blade 200; chisel toothhistorical metal-tool approval; see restrictions · FR 108; TI 04/1995 conditions
Service note · FR 108
FR 108: pivot mounting, controls and drive geometry
Flexible connection and six-bushing rigid drive are distinct; tool mounting is M 10 x 1 left-hand thread.
- Handle adjusts along the shaft for operating position. Anti-vibration elements lie between engine and support frame; pivot-mounted engine follows drive-tube movements to reduce loads on the flexible drive shaft. Source describes AV system and controls as on FR 106, without establishing all-part interchange.
- Control illustration 360 TI 002: throttle trigger lock (4), throttle trigger (5), slide control (6). Starting throttle, run and stop positions are selected one-handed. Claimed handling, safety and fatigue benefits are source descriptions, not independently measured results.
- Clutch has lined shoes pivot-mounted on the flywheel. Rigid drive shaft is supported by SIX bushings; do not confuse it with the flexible engine connection. Gearhead is described as same as FS 66 through 108 and FR 106, but the TI supplies no universal parts substitution roster for that range.
- Cutting-tool mounting (page 4 key 7) is M 10 x 1 LEFT-HAND thread, described as on FS 74,76,86,88,106,108 and FR 106. Gearhead is a helical bevel drive with printed ratio 1.33. Source lists engine speed 12,000 rpm separately from maximum output-shaft/tool-mounting speed 9,000 rpm; they are not interchangeable limits.
- Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 1 · TI 4/1995, p. 3 · TI 4/1995, p. 4 · TI 4/1995, p. 5 — pivot mounting, controls and drive geometry.
No additional parts-table entry added.
Service note · FR 108
FR 108: head-specific nylon line and Polycut blades
Orange 0.095 in fits the seven listed heads; red 0.105 in is limited to Fixed Line Head and Polycut 40-3.
- Orange 0.095 in line applies to Supercut 2-2/20-2, Autocut 25-2/30-2, Polymatic 30-2, Fixed Line Head and Polycut 40-3. Packages:50 ft=0000 930 2587;1/2 lb=0000 930 2582;1 lb=0000 930 2579;3 lb=0000 930 2246;5 lb=0000 930 2247.
- Red 0.105 in line applies ONLY to the listed Fixed Line Head and Polycut 40-3:35 ft=0000 930 2586;1 lb=0000 930 2578. Do not extend that row to the other five heads. Lengths/weights are supplied package sizes, not installed cutting-line lengths or machine quantities.
- Thermoplastic blades for Polycut 40-3 are set 4111 007 1001 of 12 blades. Twelve is the supply-set count, not 12 simultaneously installed blades. Deflector/skirt and line-limiting requirements still apply to the actual cutting-head configuration.
- Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 2 · TI 4/1995, p. 6 — head-specific nylon line and Polycut blades.
Part numbers (8)
- 0000 930 2587 — Orange 0.095 in line;50 fthistorical head-specific consumable · FR 108; TI 04/1995 conditions
- 0000 930 2582 — Orange 0.095 in line;1/2 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
- 0000 930 2579 — Orange 0.095 in line;1 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
- 0000 930 2246 — Orange 0.095 in line;3 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
- 0000 930 2247 — Orange 0.095 in line;5 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
- 0000 930 2586 — Red 0.105 in line;35 fthistorical head-specific consumable · FR 108; TI 04/1995 conditions
- 0000 930 2578 — Red 0.105 in line;1 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
- 4111 007 1001 — Polycut 40-3 thermoplastic blades;set 12historical head-specific consumable · FR 108; TI 04/1995 conditions
Service note · FR 108
FR 108: tool-specific sharpening aids
5.5 mm round file belongs to the chisel-tooth circular saw blade 200, not every metal cutting tool.
- File holder 5605 750 4343 includes round file 0811 411 8108, diameter 5.5 mm, for circular saw blade 200 CHISEL TOOTH. Do not apply that filing specification to scratcher-tooth blade 200 or brush knife.
- Sharpening template 0457 342 2629 is for brush knife 250. STIHL balancer 5910 850 2600 is described as universal in this sharpening-aid table; that wording is not a universal cutting-tool fitment approval. The page does not provide filing angles or a full sharpening procedure.
- Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 6 — tool-specific sharpening aids.
Part numbers (4)
- 5605 750 4343 — File holderincludes 5.5 mm round file; chisel-tooth 200 · FR 108; TI 04/1995 conditions
- 0811 411 8108 — Round file 5.5 mmincluded with holder; chisel-tooth 200 · FR 108; TI 04/1995 conditions
- 0457 342 2629 — Sharpening templatebrush knife 250 · FR 108; TI 04/1995 conditions
- 5910 850 2600 — STIHL balanceruniversal within listed sharpening context · FR 108; TI 04/1995 conditions
Service note · FR 108
FR 108: transport guards and separate lubricants
Transport covers are not operating deflectors; rigid-shaft grease 1109 and gearhead lubricant 1117 stay distinct.
- Transport guard 4119 790 3906 is listed for cutting blades 230-4/230-8 and brush knife 250-3. Guard 4119 790 3901 is for circular saw blade 200, scratcher or chisel tooth. These are transport guards, NOT the mandatory operating deflector or saw limit stop. Later FR 108 sheet O lists the same numbers with 255/225 mm guard descriptions; those guard diameters are not replacements for the blade-size names.
- STIHL multipurpose grease 0781 120 1109,80 g (3 oz) tube, is for the RIGID DRIVE SHAFT IN TUBE. STIHL gear lubricant 0781 120 1117,80 g (3 oz) tube, is for the GEARHEAD and also appears in section 4.2. Do not merge their applications or extend the rigid-shaft instruction to the flexible shaft.
- Later FR 108 sheet K lists 0781 120 1110 as 225 g gear lubricant, whereas this TI names 0781 120 1109 multipurpose grease. These edition/package descriptions are retained without inventing a supersession, chemical equivalence or starter-rope replacement from unrelated catalog annotations.
- Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 5 · TI 4/1995, p. 7 — transport guards and separate lubricants.
Part numbers (4)
- 4119 790 3906 — Transport guard230-4/230-8 and 250-3 tools · FR 108; TI 04/1995 conditions
- 4119 790 3901 — Transport guard200 scratcher/chisel circular saw blades · FR 108; TI 04/1995 conditions
- 0781 120 1109 — Multipurpose grease;80 grigid shaft in tube · FR 108; TI 04/1995 conditions
- 0781 120 1117 — Gear lubricant;80 ggearhead · FR 108; TI 04/1995 conditions
Service note · FR 108
FR 108: handle, drive and support-frame torques
Gearhead clamps print 8.0 Nm without an imperial value; M4/M5 defaults do not override specific rows.
- All pairs are printed Nm / lbf.ft; spline screws unless otherwise named. Shroud, IS-M 5x12: 5.5 / 4.0. Two halves of control handle, IS-P 4x19: 2.0 / 1.5. Guard to handle molding, IS-P 4x35: 2.0 / 1.5. Clamp on control handle, IS-M 5x16: 3.5 / 2.6.
- Clamp screw in drive-tube sleeve, IS-M 6x25: 7.0 / 5.2. Setscrew in drive-tube sleeve, IS-M 5x10: 3.5 / 2.6. Clamp screws in gearhead, IS-M 5x20: 8.0 Nm; imperial cell is BLANK in the scan, not zero or a printed conversion.
- Bracket to support frame, IS-M 5x10: 3.5 / 2.6. Clamp to support frame, IS-M 5x10: 3.5 / 2.6. Bearing housing to support frame, IS-M 6x12: 10.0 / 7.4. Shackle to support frame, IS-M 6x12: 7.0 / 5.2. Rubber buffer, hexagon nut M6: 5.0 / 3.7.
- Engine mounting, hex-head M10x20: 30.0 / 22.0. Clamp for loop handle AND strain relief cord, IS-M 6x12: 6.0 / 4.4. Grease filler opening in gearhead, screw plug IS-M 11x10: 10.0 / 7.4.
- Screws/nuts M4, ALL OTHERS: 2.5 / 1.8. Screws/nuts M5, ALL OTHERS: 4.5 / 3.3. These residual rows are not universal torque values and do not replace listed component values or the two explicit unspecified tensioner rows. No sequence or complete installation procedure is provided.
- Historical TI 04/1995 guidance for FR 108, series 4135; no serial cutoff is printed. Exact-model IPL links are navigation, not proof of interchange or permission to use these values on an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 8 — handle, drive and support-frame torques.
No additional parts-table entry added.
Service note · FR 108
FR 108: workshop-tool roster and three explicit alternatives
Flange, air-gap gauge and circlip-plier alternatives stay conditional; signal-equipped wrenches are distinct.
- 1113 850 4200 — Test flange: leakage test; 1128 850 4200 — Alternative test flange: footnote 1 alternative to 1113 850 4200; 1111 890 6400 — Setting gauge: ignition module/flywheel air gap; 4118 890 6401 — Alternative setting gauge: footnote 2 alternative to 1111 890 6400; 0000 890 4400 — Puller: removing oil seals; 0000 893 3706 — Jaws profile 3.1: for oil-seal puller; 5910 890 2210 — Installing tool 10: hookless piston snap rings; 5910 893 5608 — Socket 13 mm: crankshaft nut: carrier/flywheel; 5910 890 0301 — Torque wrench: 0.5 to 18 Nm; 5910 890 0302 — Torque wrench: 0.5 to 18 Nm; optical/acoustical signal; 5910 890 0311 — Torque wrench: 6 to 80 Nm; 5910 890 0312 — Torque wrench: 6 to 80 Nm; optical/acoustical signal; 5910 893 8800 — Assembly hook: removing pickup body; 5910 890 2400 — T-handle screwdriver QI-T27x150: IS spline screws; 5910 890 8210 — Crimping tool: wire connectors and lugs; 5910 850 3100 — Assembly stand: holds powerhead for repair; 5910 893 2500 — Flange: assembly stand accessory; 5910 890 2100 — Clamping plate: settings as for FS 106 or FS 108; 0812 542 2104 — Socket: cylinder base screws; 4119 893 7200 — Press arbor: removing/installing main bearings; 0811 641 8380 — Pliers C19: INTERNAL gearhead circlips; 0816 630 1452 — C8 pliers: footnote 5 alternative to C19 pliers; 0811 611 8200 — Pliers A10: EXTERNAL circlips: clutch drum, gearhead, drive pinion; 0816 610 1495 — Circlip pliers: EXTERNAL clutch-drum circlips; 1108 893 4700 — Press arbor: removing clutch drum; 1118 893 7200 — Press arbor: removing/installing ball bearing in clutch housing.
- Footnotes permit ONLY the stated alternatives: flange 1128 850 4200 for 1113 850 4200; gauge 4118 890 6401 for 1111 890 6400; C8 pliers 0816 630 1452 for C19 pliers 0811 641 8380. These are historical tool alternatives, not blanket machine-part interchange.
- Footnote 4, optical/acoustical signal, attaches to torque wrenches 5910 890 0302 and 5910 890 0312, not all four wrench identifiers. The two ranges are 0.5–18 Nm and 6–80 Nm respectively. Assembly-stand accessory settings are referenced as for FS 106 or FS 108; actual setup dimensions are not provided here.
- Removing tool 4119 890 4600 is separately documented with its MANDATORY modification drawing; it must not be treated as an unrestricted tool from this roster. Neither roster nor generic tool name supplies a complete repair procedure.
- Historical TI 04/1995 guidance for FR 108, series 4135; no serial cutoff is printed. Exact-model IPL links are navigation, not proof of interchange or permission to use these values on an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 10 — workshop-tool roster and three explicit alternatives.
Part numbers (26)
- 1113 850 4200 — Test flangeleakage test · FR 108; TI 04/1995 conditions
- 1128 850 4200 — Alternative test flangefootnote 1 alternative to 1113 850 4200 · FR 108; TI 04/1995 conditions
- 1111 890 6400 — Setting gaugeignition module/flywheel air gap · FR 108; TI 04/1995 conditions
- 4118 890 6401 — Alternative setting gaugefootnote 2 alternative to 1111 890 6400 · FR 108; TI 04/1995 conditions
- 0000 890 4400 — Pullerremoving oil seals · FR 108; TI 04/1995 conditions
- 0000 893 3706 — Jaws profile 3.1for oil-seal puller · FR 108; TI 04/1995 conditions
- 5910 890 2210 — Installing tool 10hookless piston snap rings · FR 108; TI 04/1995 conditions
- 5910 893 5608 — Socket 13 mmcrankshaft nut: carrier/flywheel · FR 108; TI 04/1995 conditions
- 5910 890 0301 — Torque wrench0.5 to 18 Nm · FR 108; TI 04/1995 conditions
- 5910 890 0302 — Torque wrench0.5 to 18 Nm; optical/acoustical signal · FR 108; TI 04/1995 conditions
- 5910 890 0311 — Torque wrench6 to 80 Nm · FR 108; TI 04/1995 conditions
- 5910 890 0312 — Torque wrench6 to 80 Nm; optical/acoustical signal · FR 108; TI 04/1995 conditions
- 5910 893 8800 — Assembly hookremoving pickup body · FR 108; TI 04/1995 conditions
- 5910 890 2400 — T-handle screwdriver QI-T27x150IS spline screws · FR 108; TI 04/1995 conditions
- 5910 890 8210 — Crimping toolwire connectors and lugs · FR 108; TI 04/1995 conditions
- 5910 850 3100 — Assembly standholds powerhead for repair · FR 108; TI 04/1995 conditions
- 5910 893 2500 — Flangeassembly stand accessory · FR 108; TI 04/1995 conditions
- 5910 890 2100 — Clamping platesettings as for FS 106 or FS 108 · FR 108; TI 04/1995 conditions
- 0812 542 2104 — Socketcylinder base screws · FR 108; TI 04/1995 conditions
- 4119 893 7200 — Press arborremoving/installing main bearings · FR 108; TI 04/1995 conditions
- 0811 641 8380 — Pliers C19INTERNAL gearhead circlips · FR 108; TI 04/1995 conditions
- 0816 630 1452 — C8 pliersfootnote 5 alternative to C19 pliers · FR 108; TI 04/1995 conditions
- 0811 611 8200 — Pliers A10EXTERNAL circlips: clutch drum, gearhead, drive pinion · FR 108; TI 04/1995 conditions
- 0816 610 1495 — Circlip pliersEXTERNAL clutch-drum circlips · FR 108; TI 04/1995 conditions
- 1108 893 4700 — Press arborremoving clutch drum · FR 108; TI 04/1995 conditions
- 1118 893 7200 — Press arborremoving/installing ball bearing in clutch housing · FR 108; TI 04/1995 conditions
Service note · FR 108
FR 108: twenty historical workshop repair times
Tenths of an hour, not clock-minute decimals; trained staff and an equipped workshop are prerequisites.
- Table header explicitly names FS 88, FS 108 and FR 108. All values are HOURS expressed in tenths: 0.1 hour = 6 minutes. Values assume trained personnel in a properly equipped service workshop; they are historical labor allowances, not guaranteed owner repair durations, prices or mandatory service intervals.
- 1 Crankcase, Short Block: 2.1 h; 2 Crankshaft and/or Bearings: 2.2 h; 3 Crankcase Gasket, Sealing: 2.0 h; 4 Crankshaft seals: 0.7 h; 5 Cylinder and/or Piston: 0.8 h; 6 Ignition: 0.5 h; 7 Fuel Hose, Fuel Supply: 0.5 h; 8 Gear Box, Arbor Assy: 0.6 h; 9 Carburetor: 0.7 h; 10 Fan Housing, Clutch Housing: 0.8 h; 11 Front Handle, Throttle: 0.6 h; 12 Recoil Starter: 0.5 h; 13 Clutch: 0.5 h; 14 Drive Tube, Drive Shaft: 0.5 h; 15 Muffler: 0.4 h; 16 Air Filter, Filter Cover: 0.3 h; 17 Stop Switch: 0.4 h; 18 Fuel Tank: 0.4 h; 19 Replace Arbor Gears: 0.8 h; 20 Misc. Repairs: 0.5 h.
- The TI says this table for the new brushcutters can be added to the STIHL repair-times table. The cut-out border/scissors mark is a layout aid, not another repair instruction. Model names in this table do not establish parts interchange or authorize extending the FR 108 torque table to FS models.
- Historical TI 04/1995 guidance for FR 108, series 4135; no serial cutoff is printed. Exact-model IPL links are navigation, not proof of interchange or permission to use these values on an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 11 — twenty historical workshop repair times.
No additional parts-table entry added.
Wrong number or missing part for the FR 108? Report a correction →