Stihl 4140 · Section L · 11 of 28 · 28 parts
Air filter, Spacer flange
Fits FS 55, FS 55 C, FS 55 R, FS 55 RC, FS 55 T.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (28)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4140 124 2800 | Filter Fitment / change note → | 1 |
| 2 | 4140 140 2850 | Filter housing Fitment / change note → | 1 |
| 3 | 4140 141 3700 | Lever Fitment / change note → | 1 |
| 4 | 4140 141 3801 | Choke shutter Fitment / change note → → replaced by 4601 007 1009 TI 28/2004 | 1 |
| 5 | 4140 141 3800 NLA | Choke shutter Fitment / change note → | 1 |
| 6 | 9417 003 7512 | Push nut 4.0x9.6x1.8 Fitment / change note → | 1 |
| 7 | 9210 261 0700 | Hexagon nut M5 | 2 |
| 8 | 4140 141 0502 | Filter cover Fitment / change note → → replaced by 4140 140 1001 TI 28/2004 | 1 |
| 9 | 4140 141 0500 NLA | Filter cover Fitment / change note → | 1 |
| 10 | 4140 129 0900 | Gasket | 1 |
| 11 | 4140 120 0619 | Carburetor C1Q-S186A | 1 |
| 12 | 4140 120 0620 | Carburetor C1Q-S187A | 1 |
| 13 | 4140 120 0606 NLA | Carburetor C1Q-S71 | 1 |
| 14 | 4140 120 0603 NLA | Carburetor C1Q-S66 → replaced by 4140 120 0606 TI 36/2002 | 1 |
| 15 | 4140 120 0610 NLA | Carburetor C1Q-S58A Fitment / change note → → replaced by 4140 120 0603 TI 27/2001 | 1 |
| 16 | 4140 120 0600 NLA | Carburetor C1Q-S44A Fitment / change note → | 1 |
| 17 | 4140 120 0601 NLA | Carburetor C1Q-S53A Fitment / change note → | 1 |
| 18 | 4114 149 1205 | Gasket | 1 |
| 19 | 4140 121 1605 | Spacer flange Fitment / change note → | 1 |
| 20 | 4140 182 7601 | Tensioner Fitment / change note → | 1 |
| 21 | 4140 182 7602 | Tensioner Fitment / change note → | 1 |
| 22 | 9022 313 0680 | Spline screw IS-M4x16 | 1 |
| 23 | 4137 123 8900 | Pin Fitment / change note → | 1 |
| 24 | 9417 003 7512 | Push nut 4.0x9.6x1.8 Fitment / change note → | 1 |
| 25 | 9075 478 4159 | Pan head self-tapping screw IS-D5x24 | 2 |
| 26 | 9007 319 1135 | Hexagon head screw M5x65 | 2 |
| 27 | 4140 129 0906 | Gasket | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4140 007 1050 | Set of gaskets | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · HL 45 / FC 55 / FS 55 / FS 45
HL 45, FC 55, FS 45/55: structured spacer flange
New spacer flange accompanies the three-screw carburetor.
- Only the named HL 45, FC 55, FS 55 and FS 45 configurations are covered. Shared IPL sheets do not extend this note to FS 38/46 or unnamed C/L/R/RC/T variants. The HL 45 header says series 4232; 4140 powerhead navigation is not a series-equivalence claim.
- Spacer flange 4140 121 1600 changes to 4140 121 1605 with introduction of the new carburetor. The new inner surface is structured for optimized gas flow; the drawing distinguishes the two versions.
- The previous flange remains available for older machines and/or other models. The TI does not declare an unrestricted standalone conversion or establish a serial cutoff.
- Introduction of the overall model update is in progress, not a dated universal serial cutoff. Availability is historical 2001 factory supply, not current stock. No hardware fitment or operation was tested.
Source: TI 27/2001, p. 4 · TI 27/2001, p. 7 · TI 27/2001, p. 8 — Section2.2, diagram and summary row3/remark1.
Part numbers (2)
- 4140 121 1600 — Spacer flangePrevious; retained · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 121 1605 — Structured spacer flangeNew with updated carburetor · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
Conditional replacement · HL 45 / FC 55 / FS 55 / FS 45
HL 45, FC 55, FS 45/55: tensioner and loop-handle cable
Integral-pivot tensioner precedes a separate serial-bound loop-handle cable change.
2 51 188 982 — From this serial for the stated further loop-handle throttle-cable/tensioner modification only; not the whole update.
- Only the named HL 45, FC 55, FS 55 and FS 45 configurations are covered. Shared IPL sheets do not extend this note to FS 38/46 or unnamed C/L/R/RC/T variants. The HL 45 header says series 4232; 4140 powerhead navigation is not a series-equivalence claim.
- Tensioner 4140 182 7600 was first replaced by interim 4140 182 7602, which pivots on an integrally molded spacer-flange pin. Separate pin 4137 123 8900 and push nut 9417 003 7512 are omitted at this tensioner. The summary retains previous parts for older machines/other models; this is not a machine-wide deletion of the push nut, which remains at the choke.
- A further line modification from serial number 2 51 188 982 introduces tensioner 4140 182 7601 and cable 4140 180 1105 on all machines with a loop handle. The longer sheath extends over the whole tensioner and is held by it. The summary replaces cable 4140 180 1100 and retains it and interim tensioner 7602 for older machines/other models.
- This serial applies to the stated loop-handle cable/tensioner modification, not the complete emissions package or a model-production interval. No bike-handle cable application is inferred.
- Introduction of the overall model update is in progress, not a dated universal serial cutoff. Availability is historical 2001 factory supply, not current stock. No hardware fitment or operation was tested.
Source: TI 27/2001, p. 4 · TI 27/2001, p. 5 · TI 27/2001, p. 7 · TI 27/2001, p. 8 — Section2.3, both tensioner illustrations and summary rows4–7/remarks1.
Part numbers (7)
- 4140 182 7600 — TensionerOriginal · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 182 7602 — Integral-pivot tensionerInterim · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 182 7601 — TensionerFurther line modification · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4137 123 8900 — Bearing pinOmitted at new tensioner · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 9417 003 7512 — Push nutOmitted at tensioner, retained at choke · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 180 1100 — Throttle cablePrevious · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 180 1105 — Throttle cableNew; loop-handle machines only · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
Conditional replacement · HL 45 / FC 55 / FS 55 / FS 45
HL 45, FC 55, FS 45/55: universal replacement filter housing
Unmarked replacement cover serves both carburetor generations; production markings are distinct.
- Only the named HL 45, FC 55, FS 55 and FS 45 configurations are covered. Shared IPL sheets do not extend this note to FS 38/46 or unnamed C/L/R/RC/T variants. The HL 45 header says series 4232; 4140 powerhead navigation is not a series-equivalence claim.
- With the new carburetor, the hinge moves outboard to improve screw access; production cover markings change from LD to H 3/4 and L 1. The modified choke shutter 4140 141 3801 is orange rather than the previous black 4140 141 3800.
- Use new complete filter housing 4140 140 2850 for a damaged housing irrespective of old/new carburetor version. It includes unmarked replacement cover 4140 141 0502, with no setting symbols, making it universal within the named model scope. Do not confuse it with the marked production cover.
- Previous cover 4140 141 0500 remains available for LD/BIS carburetors 4140 120 0600/0601/0610. Previous housing 4140 140 2800 is deleted; its new counterpart is not supplied separately, use complete item8. The summary includes housing, lever, choke shutter, push nut, filter and cover.
- Lever 4140 141 3700, choke push nut 9417 003 7512 and filter 4140 124 2800 are unchanged. The old choke shutter remains listed for older machines/other models. Push-nut omission in section2.3 does not apply here.
- Introduction of the overall model update is in progress, not a dated universal serial cutoff. Availability is historical 2001 factory supply, not current stock. No hardware fitment or operation was tested.
Source: TI 27/2001, p. 5 · TI 27/2001, p. 7 · TI 27/2001, p. 8 — Section2.4, diagram and summary rows8–14/remarks1,3–5.
Part numbers (12)
- 4140 140 2850 — Complete filter housingUniversal replacement · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 140 2800 — Filter housing subassemblyPrevious; deleted · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 141 0500 — LD filter coverPrevious; retained for LD/BIS · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 141 0502 — Unmarked replacement filter coverIncluded with new housing · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 141 3800 — Black choke shutterPrevious · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 141 3801 — Orange choke shutterNew · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 141 3700 — Choke leverUnchanged · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 9417 003 7512 — Choke push nutUnchanged · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 124 2800 — FilterUnchanged · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 120 0600 — C1Q-S44 carburetorLD cover application · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 120 0601 — C1Q-S53 carburetorLD cover application · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 120 0610 — C1Q-S58 carburetorLD cover application · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
Wrong number or missing part for the FS 55, FS 55 C, FS 55 R, FS 55 RC, FS 55 T? Report a correction →