← FS 25-4, FS 65-4

Stihl 4170 · Section N · 13 of 14 · 6 parts

Transport guard

Fits FS 25-4, FS 65-4.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
123456
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (6)

PosPart numberDescriptionQty
1 4116 790 3901 Transport guard Ø 350 1
2 4116 792 4300 Clamping wire 1
3 4119 790 3901 Transport guard Ø 225 Fitment / change note → 1
4 4119 792 4300 Clamping wire 1
5 4119 790 3906 Transport guard Ø 255 Fitment / change note → 1
6 4119 792 4305 Clamping wire 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 25-4 / FS 65-4

FS 25-4 / FS 65-4: transport guards and service consumables

Accessory application ranges are not extra cutting-tool approvals; lubricant destinations stay distinct.

  • Page 6 section 4 lists transport guard 4116 790 3900 for all metal cutting tools;4119 790 3906 for cutting blades 230-4 and255-8 plus circular blade 225 scratcher/chisel;4119 790 3901 for circular blades 200 and225 scratcher/chisel. These are ACCESSORY application ranges, not approval of255-8 or225mm blades on these machines; section 3 remains the machine-tool limit.
  • Retained4170 transport-guard sheet lists3901 as Ø225 and3906 as Ø255, shorter/different descriptions than the TI ranges; preserve both, not a silent narrowing or expansion. Guard3900 is not listed there. No invented replacement chain, availability or drawing position.
  • STIHL gear lubricant 1109 (80g) /1110 (225g) is for DRIVE SHAFT IN DRIVE TUBE; heavy-duty gear lubricant 1117 (80g) /1118 (225g) is for GEARHEAD. Full order numbers are in the parts list below. Later4170 gearhead sheet calls1117 “Gear lubricant 80g”; its shorter wording does not merge the historical application distinction.
  • Special oil 0781 417 1315,100ml bottle: rewind spring and rope-rotor bearing bore, NOT the engine-oil specification. Page 7 section 4.2: saw set4020 893 5000 for200/225 CHISEL-TOOTH circular blades; sharpening template4020 890 5500 for brush knife. No sharpening angles or scratcher-tooth saw-setting permission is supplied.
  • Historical TI14/1998, series 4170: FS 25-4 and FS 65-4 only, with stated handle restrictions. Not FS 25/FS 65 two-strokes or later 4-MIX engines. No serial cutoff or current-stock promise is supplied. No hardware operation was performed.

Source: TI 14/1998, p. 6 · TI 14/1998, p. 7 — Page 6 entire section 4 accessory table; page 7 section 4.2 sharpening aids.

Part numbers (10)
  • 4116 790 3900 — Transport guardHistorical accessory/consumable · All metal cutting tools per TI
  • 4119 790 3906 — Transport guardHistorical accessory/consumable · 230-4,255-8 cutting blades;225 scratcher/chisel circular blades
  • 4119 790 3901 — Transport guardHistorical accessory/consumable · 200 and225 scratcher/chisel circular blades
  • 0781 120 1109 — Gear lubricant 80gHistorical accessory/consumable · Drive shaft in drive tube
  • 0781 120 1110 — Gear lubricant 225gHistorical accessory/consumable · Drive shaft in drive tube
  • 0781 120 1117 — Heavy-duty gear lubricant 80gHistorical accessory/consumable · Gearhead
  • 0781 120 1118 — Heavy-duty gear lubricant 225gHistorical accessory/consumable · Gearhead
  • 0781 417 1315 — Special oil 100mlHistorical accessory/consumable · Starter rewind spring and rope-rotor bearing bore
  • 4020 893 5000 — Saw setHistorical accessory/consumable · 200/225 circular blades CHISEL TOOTH
  • 4020 890 5500 — Sharpening templateHistorical accessory/consumable · Brush knife

Wrong number or missing part for the FS 25-4, FS 65-4? Report a correction →