← FS 25-4, FS 65-4

Stihl 4170 · Section M · 12 of 14 · 22 parts

Deflector

Fits FS 25-4, FS 65-4.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110101111121213141515161617181922220333456778899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (22)

PosPart numberDescriptionQty
1 4119 710 8103 Deflector 1
2 0000 716 3101 Backing plate 1
3 9022 373 1025 Spline screw IS-M5x23 4
4 4119 716 3203 Skirt 1
5 4119 710 6000 Blade 1
6 4118 713 4105 Blade 1
7 9074 478 4125 Pan head self-tapping screw IS-5x14 2
8 not sold separately O-ring 4x2 not available as a separate item 4
9 0000 716 3100 Backing plate 1
10 9074 478 2970 Pan head self-tapping screw IS-P4x10 2
11 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 4
12 9022 341 0980 Spline screw IS-M5x16 4
13 4133 007 1007 Deflector kit 1
14 4133 007 1008 Deflector kit 1
15 4133 713 4110 Blade 1
16 9074 478 4405 Pan head self-tapping screw IS-P6x14 1
17 4117 710 8200 Limit stop Ø 200 1
18 not sold separately O-ring 4x2 not available as a separate item 3
19 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 3
20 9022 341 0980 Spline screw IS-M5x16 3
Not numbered on the diagram — assemblies, kits and options
— 4119 007 1027 Deflector kit 1
— 0000 007 1300 Set of O-rings N 4x2-EPDM70 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 25-4 / FS 65-4

FS 25-4 / FS 65-4: cutting tools and handle restrictions

Metal-tool and circular-blade limits are explicit; the Autocut 30-2 footnote remains ambiguous.

  • Page 6 section 3 lists eleven approved cutting tools, illustrated by matching numbers1–11. Head 1 Supercut 20-2,2 Autocut 21-2,3 Autocut 25-2,4 Autocut 30-2,5 Polymatic 30-2,6 Polycut 20-3; blades 7–11 are separately restricted. Drawings do not establish guards, harnesses or adapters not printed.
  • UNRESOLVED FOOTNOTE: Autocut 30-2 is marked1); both scan and retained text read “Note for FS 25-4”. This may be a printing error, but it is NOT silently rewritten as “Not for FS 25-4” or treated as unconditional FS 25-4 approval. Confirm an unambiguous exact-model source before selecting Autocut 30-2 for FS 25-4. FS 65-4 has no stated exclusion in this footnote.
  • Footnote 2 on cutting blades 230-4,230-8 and brush knife250-3: NOT FOR LOOP HANDLE UNITS WITHOUT BARRIER BAR. A bare loop handle does not satisfy this condition. Footnote 3 on BOTH circular saw blades 200 (scratcher/chisel): ONLY FOR FS 65-4 WITH BIKE HANDLE; not FS 25-4 or FS 65-4 loop handle, even with barrier.
  • Page 7 section 4.1: 2.4 mm ORANGE nylon line for Supercut 20-2, Autocut 21-2, Autocut 25-2, Autocut 30-2, Polymatic 30-2 and Polycut 20-3; 2.7 mm RED only for Polycut 20-3 in this list. Line compatibility does not remove the unresolved Autocut 30-2/FS 25-4 footnote.
  • The retained 4170 catalog has no individual cutting-head/blade sheet with these eleven numbers. Bind to its deflector context only, with no invented positions or assertion that any cataloged deflector fits every tool. User-accessory references to255-8/225mm blades do not expand this approved machine-tool list.
  • Historical TI14/1998, series 4170: FS 25-4 and FS 65-4 only, with stated handle restrictions. Not FS 25/FS 65 two-strokes or later 4-MIX engines. No serial cutoff or current-stock promise is supplied. No hardware operation was performed.

Source: TI 14/1998, p. 6 · TI 14/1998, p. 7 — Page 6 complete section 3 list, eleven drawings and all footnotes; page 7 section 4.1.

Part numbers (11)
  • 4002 710 2162 — Supercut 20-2Listed cutting tool; restrictions apply · FS 25-4 / FS 65-4
  • 4002 710 2113 — Autocut 21-2Listed cutting tool; restrictions apply · FS 25-4 / FS 65-4
  • 4002 710 2108 — Autocut 25-2Listed cutting tool; restrictions apply · FS 25-4 / FS 65-4
  • 4002 710 2107 — Autocut 30-2Listed cutting tool; restrictions apply · FS 25-4 unresolved footnote; FS 65-4 listed
  • 4002 710 2120 — Polymatic 30-2Listed cutting tool; restrictions apply · FS 25-4 / FS 65-4
  • 4002 710 2130 — Polycut 20-3Listed cutting tool; restrictions apply · FS 25-4 / FS 65-4
  • 4001 713 3801 — Cutting blade 230-4Listed cutting tool; restrictions apply · Not loop handle without barrier bar
  • 4001 713 3803 — Cutting blade 230-8Listed cutting tool; restrictions apply · Not loop handle without barrier bar
  • 4112 713 4100 — Brush knife250-3Listed cutting tool; restrictions apply · Not loop handle without barrier bar
  • 4112 713 4201 — Circular saw blade 200 scratcher toothListed cutting tool; restrictions apply · FS 65-4 bike handle ONLY
  • 4112 713 4203 — Circular saw blade 200 chisel toothListed cutting tool; restrictions apply · FS 65-4 bike handle ONLY

Wrong number or missing part for the FS 25-4, FS 65-4? Report a correction →