Stihl 4180 · Section N · 13 of 21 · 21 parts
Angle drive 0°, 30° (24.2005)
Fits HL 100, HL 100 K.
Parts (21)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4230 640 0556 | Gear housing | 1 |
| 2 | 9503 003 0100 | Grooved ball bearing 6000 | 1 |
| 3 | 9503 003 9853 | Grooved ball bearing 609-2Z | 2 |
| 4 | 4130 640 7301 | Set of pinions | 1 |
| 5 | 4230 642 0606 | Drive shaft | 1 |
| 6 | 9455 621 0750 | Circlip 9x1 | 1 |
| 7 | 9456 621 2660 | Circlip 24x1.2 | 1 |
| 8 | 9503 003 5190 | Grooved ball bearing 6001-2RS | |
| 9 | 9456 621 3100 | Circlip 28x1.2 | 1 |
| 10 | 4226 641 6500 | Screw plug | 1 |
| 11 | 4230 642 0405 | Drive pinion | 1 |
| 12 | 9455 621 0850 | Circlip 10x1 | 1 |
| 13 | 4230 640 0550 NLA | Gear housing | 1 |
| 14 | 9503 003 9850 | Grooved ball bearing 609 → replaced by 9503 003 9853 TI 46/2000 | 1 |
| 15 | 9503 003 9853 | Grooved ball bearing 609-2Z | 1 |
| 16 | 4230 640 7300 NLA | Set of pinions | 1 |
| 17 | 9022 341 1300 | Spline screw IS-M6x20 | 2 |
| 18 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 4 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4230 640 0105 | Gearhead 30° | 1 |
| — | 4230 640 0100 NLA | Gearhead 0° | 1 |
| — | 0781 120 1109 | Gear lubricant 80 g not illustratedoption | 1 |
2012 service parts catalogue. Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Wrong number or missing part for the HL 100, HL 100 K? Report a correction →