← Cut-off machines · series 4201

Stihl 4201 · Section D · 4 of 24 · 14 parts

Muffler

Fits TS 510, TS 760.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101123456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (14)

PosPart numberDescriptionQty
1 1111 149 0600 Muffler gasket 1
2 1111 140 0613 Muffler 1
3 4205 140 0601 Muffler Fitment / change note → 1
4 1111 140 0609 Muffler Fitment / change note → 1
5 1111 141 9005 NLA Screen 1
6 9099 021 0810 Self-tapping screw 4.2x9.5 1
7 9022 341 1010 Spline screw IS-M5x18 2
8 1111 149 0602 Muffler gasket 1
9 1111 140 0614 Muffler 1
10 4205 140 0602 Muffler Fitment / change note → 1
11 1111 140 0610 Muffler Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 1111 007 1050 Set of gaskets 1
— 1111 007 1052 Set of gaskets 1
— 1111 007 1051 NLA Set of gaskets 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · TS 510 / TS 760

TS 510 / TS 760: EPA mufflers add a heat-conducting plate

Model-specific replacements retain original non-EPA availability.

  • Historical TI07/1998 for TS 510 and TS 760, type 4205. The exact-model 2012 IPL is filed under catalog family 4201; that navigation key does not change the TI type. Later sheets are comparison/navigation evidence, not proof that later carburetor revisions share the 1998 settings. Historical factory availability is not current stock or verified physical interchange. No hardware operation was performed.
  • Mufflers WITH SPARK ARRESTING SCREEN are replaced by modified versions with an ADDITIONAL HEAT-CONDUCTING PLATE. The TI does not describe removal of the screen or give a separate order number for the added plate.
  • TS 510 original 1111 140 0609 → EPA muffler 4205 140 0601. TS 760 original 1111 140 0610 → EPA muffler 4205 140 0602. Each includes THE SAME PARTS AS BEFORE. Keep the TS510 and TS760 assignments distinct; the heat plate is not a universal conversion kit.
  • Introduction is CONTINUOUS, with no numeric serial cutoff. Both original mufflers REMAIN AVAILABLE FOR MACHINES WITHOUT EPA PERMIT. This does not authorize unrestricted substitution for an EPA machine.
  • The later muffler IPL retains all four numbers and also lists other muffler versions. Those additional later rows do not erase the 1998 screen-equipped/heat-plate restriction. No installation torque, emission test result or full EPA conversion procedure is supplied.
  • The footer’s last-TI pointers TS760:31.97 and TS510/760:26.96, copyright1998 and documentation6249 are bibliographic history, not delegated muffler instructions or production cutoffs.

Source: TI 7/1998, p. 5 — Section 3 full muffler text, summary and remark.

Part numbers (4)
  • 1111 140 0609 — Muffler with spark arresting screenOriginal; non-EPA availability · TS 510; only the stated version and restrictions
  • 4205 140 0601 — EPA muffler with added heat-conducting plateNew · TS 510; only the stated version and restrictions
  • 1111 140 0610 — Muffler with spark arresting screenOriginal; non-EPA availability · TS 760; only the stated version and restrictions
  • 4205 140 0602 — EPA muffler with added heat-conducting plateNew · TS 760; only the stated version and restrictions

Wrong number or missing part for the TS 510, TS 760? Report a correction →