Stihl 4201 · Section C · 3 of 24 · 29 parts
Cylinder
Fits TS 510, TS 760.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
This drawing carries 2 bore sizes — Ø 52 mm , Ø 58 mm . Not interchangeable — measure your cylinder before ordering. The catalogue lists them on one sheet for one machine and never says which variant each belongs to, so this guide does not either.
Parts (29)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1111 029 2300 | Cylinder gasket | 1 |
| 2 | 1111 020 1200 | Cylinder with piston Ø 52 mm Fitment / change note → | 1 |
| 3 | 1111 030 2000 | Piston Ø 52 mm | 1 |
| 4 | 1115 034 3001 | Piston ring Ø 52x1.5 mm | 2 |
| 5 | 1111 034 1501 | Piston pin 13x8x39 | 1 |
| 6 | 9462 650 1300 | Snap ring 13 | 2 |
| 7 | 1111 025 2200 | Plug Fitment / change note → | 1 |
| 8 | 1111 020 9400 | Decompression valve Fitment / change note → | 1 |
| 9 | 9636 003 0420 | Sealing ring 6.5x9.5 Fitment / change note → | 1 |
| 10 | 9036 371 1020 | Socket head screw M5x20 | 4 |
| 11 | 4205 020 1201 | Cylinder with piston Ø 52 mm Fitment / change note → | 1 |
| 12 | 1111 029 2301 | Cylinder gasket | 1 |
| 13 | 1111 020 1206 | Cylinder with piston Ø 58 mm Fitment / change note → | 1 |
| 14 | 1111 030 2002 | Piston Ø 58 mm | 1 |
| 15 | 1111 034 3006 | Piston ring Ø 58x1.5 mm | 2 |
| 16 | 1111 034 1500 | Piston pin 13x8x44 | 1 |
| 17 | 1124 020 9400 | Decompression valve | 1 |
| 18 | 9022 313 0935 | Spline screw IS-M5x8 | 1 |
| 19 | 0000 953 1009 | Stud | 4 |
| 20 | 9291 021 0140 | Washer 6.4 | 4 |
| 21 | 9210 319 0900 | Hexagon nut M6 | 4 |
| 22 | 4205 020 1200 | Cylinder with piston Ø 58 mm Fitment / change note → | 1 |
| 23 | 4205 084 1600 | Cover | 1 |
| 24 | 0000 400 7000 | Spark plug NGK BPMR7A | 1 |
| 25 | 0000 998 0603 | Torsion spring → replaced by 0000 998 0604 TI 30/1995 | 1 |
| 26 | 1106 405 1000 | Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1111 007 1050 | Set of gaskets | 1 |
| — | 1111 007 1052 | Set of gaskets | 1 |
| — | 1111 007 1051 NLA | Set of gaskets | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · TS 510 / 051
TS 510 / 051: unchanged cylinder number and decompression port
Cylinder 1111 020 1200 retains its number; its plugged port supports older TS 510 and 051 use.
- Section 4 and drawing 328TI014 explicitly concern the TS 510 cylinder. The tapped decompression-valve hole has long been present in replacement cylinder 1111 020 1200 and sealed with plug 1111 025 2200. The bulletin permits this cylinder for TS 510 of ANY VERSION and, as previously, the 051 chainsaw. It does not grant this cylinder to TS 760 or to 050 merely because they share catalog sheets.
- The table repeats cylinder-with-piston number 1111 020 1200 in BOTH columns and says factory supply is only the modified version (remark 1). Its stated contents are item 2 sealing ring and item 3 plug, NOT decompression valve item 1. A same-number replacement cylinder does not prove the machine originally had decompression or that the valve is included.
- New decompression valve 1111 020 9400 includes item 2 sealing ring A6.5x9.5, number 9636 003 0420. The cylinder instead includes that sealing ring and plug 1111 025 2200. Drawing 328TI014 shows the alternative valve/plug arrangement and separate sealing-ring callouts; it is not an instruction to install valve and plug together in one hole.
- The easy-starting production event is X 24 093 969, but the note says the tapped replacement-cylinder hole already existed. Do not date first existence of the threaded cylinder to that event. The reference to earlier TS 460 decompression explanations does not supply TS 510 torque or leak-test instructions.
- Later exact TS 510/760 sheet C lists the same cylinder, plug, valve and sealing ring alongside other cylinders/valves. Link only the named TS 510 assertion here. The shared 050/051 cylinder sheet is context for the explicitly named 051, not added 050 applicability.
- Historical TI26/1996 section 4: cylinder applicability is explicitly TS 510 and 051; listed new decompression valve is the TS 510 detail. Shared sheets do not add TS 760 or 050. Historical supply is not current stock. No hardware operation was performed.
Source: TI 26/1996, p. 1 · TI 26/1996, p. 9 — TS 510 / 051: unchanged cylinder number and decompression port.
Part numbers (4)
- 1111 020 1200 — Cylinder with piston TS 510 / 051Same number; modified-only supply · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
- 1111 025 2200 — Cylinder port plugIncluded with replacement cylinder · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
- 1111 020 9400 — Decompression valveTS 510 valve; includes sealing ring · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
- 9636 003 0420 — Sealing ring A6.5x9.5Included with valve and cylinder · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
Conditional replacement · TS 510 / TS 760
TS 510 / TS 760: EPA cylinder changes preserve dimensions but split by model
TS510 and TS760 power ratings and cylinder numbers are not interchangeable.
- Historical TI07/1998 for TS 510 and TS 760, type 4205. The exact-model 2012 IPL is filed under catalog family 4201; that navigation key does not change the TI type. Later sheets are comparison/navigation evidence, not proof that later carburetor revisions share the 1998 settings. Historical factory availability is not current stock or verified physical interchange. No hardware operation was performed.
- The combustion chamber and overflow ducts are modified to optimize combustion and reduce pollutant emissions. DISPLACEMENT, BORE, STROKE AND MOUNTING DIMENSIONS remain unchanged. That statement does not mean the two models share a bore or authorize mixing cylinder versions; the TI supplies no numerical bore or stroke values.
- TS 510 original cylinder with piston 1111 020 1200 → EPA version 4205 020 1201. TS 760 original 1111 020 1206 → EPA version 4205 020 1200. Note the opposite 1200/1201 endings on the new numbers; they must retain their MODEL assignments. Each new assembly includes THE SAME PARTS AS BEFORE.
- Maximum engine rating of EPA machines is 3.9 kW (5.3 bhp) for TS510 and 4.35 kW (5.8 bhp) for TS760. These are POWER ratings, not rpm, displacement, independent measurements or evidence of a common output.
- Introduction is CONTINUOUS, without a serial cutoff. Both original cylinder versions REMAIN AVAILABLE FOR MACHINES WITHOUT EPA PERMIT. Preserved mounting dimensions are not unrestricted EPA/non-EPA compatibility.
- The later cylinder IPL retains all four numbers and describes the TS510 pair as 52 mm and TS760 pair as 58 mm. Those sizes are later comparison evidence, not numerical dimensions printed in TI07.
Source: TI 7/1998, p. 4 · TI 7/1998, p. 5 — Section 2.1 and full cylinder summary/remark.
Part numbers (4)
- 1111 020 1200 — Cylinder with pistonOriginal; non-EPA availability · TS 510; only the stated version and restrictions
- 4205 020 1201 — Cylinder with pistonNew EPA version · TS 510; only the stated version and restrictions
- 1111 020 1206 — Cylinder with pistonOriginal; non-EPA availability · TS 760; only the stated version and restrictions
- 4205 020 1200 — Cylinder with pistonNew EPA version · TS 760; only the stated version and restrictions
Wrong number or missing part for the TS 510, TS 760? Report a correction →