← Blowers & other equipment · series 4203

Stihl 4203 · Section E · 5 of 12 · 25 parts

Fan housing

Fits SR 320, SR 400.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516161718192220212223243456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (25)

PosPart numberDescriptionQty
1 4203 700 4102 Fan housing 1
2 9443 825 7130 Hollow rivet 7.5x1x6.8 Fitment / change note → 6
3 4203 350 7600 Hose 1
4 0000 989 0516 Grommet Fitment / change note → 1
5 0000 350 3502 Pickup body 1
6 0000 358 1800 Filter 1
7 9074 478 4545 Pan head self-tapping screw IS-P6x26.5 9
8 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 6
9 4203 350 0502 Filler cap Fitment / change note → 1
10 0000 350 0900 Rope Fitment / change note → 1
11 0000 353 0701 Ring Fitment / change note → 1
12 4203 700 3401 Fanwheel Fitment / change note → 1
13 9022 341 0980 Spline screw IS-M5x16 3
14 4203 701 0701 Fan housing, outer 1
15 4203 706 2105 Shroud 1
16 9074 478 4425 Pan head self-tapping screw IS-P6x19 5
17 0000 967 3693 Warning pictogram Filler cap 1
18 9022 313 1120 Spline screw IS-M5x58 2
19 9212 421 0700 Lock nut M5 2
20 4203 182 2107 Support 1
21 4203 358 7700 Hose 1
22 1111 353 2500 Elbow connector 1
23 not sold separately Hose 3.1x5.7x135 mm, R3 not available as a separate item 1
24 4203 352 8300 Cap 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2803 Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BR 320 / BR 400 / SR 320 / SR 400

BR / SR 320 / 400: polymer fanwheel has conflicting printed numbers

Prose says 4203 704 3401; illustration and summary say 4203 700 3401.

  • Aluminium die-cast fanwheel 4203 704 3400 is to be replaced with polymer to improve operating efficiency. Original prose prints new number 4203 704 3401; illustration label 2 and summary instead print 4203 700 3401. Both are preserved as CONFLICTING printed identifiers, not two proven interchangeable parts or a resolved supersession. Retained IPL lists 4203 700 3401 but does not erase the TI conflict.
  • Summary new complete fanwheel includes fanwheel item 1 (NOT separately available; -*- is not an order number) and rivet 9443 825 7130 item 2. Original version no longer factory-available. Rivet MOQ10 is not a fitted-rivet count. Introduction in progress, no serial. No installation torque, balancing procedure, or unrestricted mixed-component retrofit supplied.
  • Historical TI 21/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 21/1994, p. 2 — BR / SR 320 / 400: polymer fanwheel has conflicting printed numbers.

Part numbers (4)
  • 4203 704 3400 — Aluminium fanwheeloriginal; no longer factory-available · BR / SR 320 / 400: polymer fanwheel has conflicting printed numbers
  • 4203 704 3401 — Polymer fanwheel number in proseconflicts with illustration/summary · BR / SR 320 / 400: polymer fanwheel has conflicting printed numbers
  • 4203 700 3401 — Polymer fanwheel assembly in illustration/summaryconflicts with prose · BR / SR 320 / 400: polymer fanwheel has conflicting printed numbers
  • 9443 825 7130 — Rivet, item 2included in new assembly · BR / SR 320 / 400: polymer fanwheel has conflicting printed numbers

Service note · BR 320 / BR 400 / SR 320 / SR 400

BR / SR 320 / 400: blind hole becomes a spring-mounting through-hole

Outer fan casing changes geometry without changing its part number.

  • In connection with the new backplate, the BLIND HOLE in the OUTER fan casing becomes a THROUGH-HOLE for mounting the spring. Its part number remains unchanged, but the bulletin does not print that number. No numeric part is invented from the later catalog.
  • No hole diameter, drilling instruction or compatibility of the original blind-hole casing with the new spring assembly is stated. Same-number continuation does not prove identical geometry. The adjacent container section is SR-only; it does not narrow the preceding common fan-casing change.
  • Historical TI 14/1996 evidence, not current stock or a verified physical interchange claim. Introduction is in progress; no numeric serial boundary is given. Shared IPL sheets do not extend this note to BR 320 L or later models. No hardware operation was performed.

Source: TI 14/1996, p. 1 · TI 14/1996, p. 2 — BR / SR 320 / 400: blind hole becomes a spring-mounting through-hole.

No additional parts-table entry added.

Historical fitment · BR 320 / BR 400 / SR 320 / SR 400

BR / SR 320 / 400: untapered 272 mm fuel hose and new grommet

Same-number hose shortens from 295 to 272 mm when grommet 0000 989 0516 is introduced.

  • Fuel hose kit 4203 007 1017 retains its number and includes grommet and hose. Grommet 4221 353 9201 is replaced by 0000 989 0516; the original remains available FOR OTHER MODELS, not an unrestricted same-model replacement.
  • Hose 4203 358 7600 retains its number but changes from 295 mm TO 272 mm. Its ends are NO LONGER TAPERED when the new grommet is introduced. Only the modified hose is available from factory. Figure 352TI003 KN shows LEFT original and RIGHT new grommet; no diameter or taper angle is specified.
  • The current exact-model fan-housing sheets list hose 4203 350 7600, whereas the original TI clearly prints 4203 358 7600. Preserve the unresolved 350/358 difference; no typo correction, alias or inferred substitute is applied. No instruction to shorten an installed old hose is supplied.
  • Historical TI 14/1996 evidence, not current stock or a verified physical interchange claim. Introduction is in progress; no numeric serial boundary is given. Shared IPL sheets do not extend this note to BR 320 L or later models. No hardware operation was performed.

Source: TI 14/1996, p. 3 — BR / SR 320 / 400: untapered 272 mm fuel hose and new grommet.

Part numbers (4)
  • 4203 007 1017 — Fuel hose kit, unchanged numberTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4221 353 9201 — Original grommet, retained for other modelsTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 0000 989 0516 — New grommetTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 358 7600 — Fuel hose, 295 → 272 mm, ends no longer taperedTI14/1996 listed configuration · Only the note’s stated models and configuration

Historical fitment · BR 320 / BR 320 L / BR 400 / SR 320 / SR 400

BR / SR 320, 320 L, 400: two-filter fuel filler cap

Cap 4203 350 0502 replaces 0501 from serial 2 39 791 866; new internals are not separately supplied.

2 39 791 866 — New complete fuel filler cap introduction for the models headed in TI40/1998; not the ignition changeover

  • The complete fuel filler cap 4203 350 0501 is replaced by 4203 350 0502 from serial 2 39 791 866. This is a model-conditioned component introduction, not a model-identification range or a production-year decoder. The ignition-module cutoff is different.
  • The new cap has two sintered-material filters. Section figure 353TI018 KN points to the upper and lower filters; exploded figure 353TI019 KN labels items1–8. The complete cap includes items1–8; inner cap item5 includes filter item6. Neither illustration gives pore size, cleaning instructions or a dismantling/rebuild authorization.
  • For future replacement supply the TI specifies the complete filler cap and the retainer cord/ring only, to simplify inventory and avoid fitting errors. Remark1 says the old COMPLETE cap is no longer available from the factory. New versions of items1–6 are not available separately (remark3); do not reuse the old internal part numbers as new-cap repair parts.
  • The retained2012 BR and SR fan-housing sheets list the exact new cap, rope and ring. This confirms catalog context only; no universal earlier-machine retrofit or reverse 0501-for-0502 permission is printed in TI40.
  • Historical TI 40/1998, series 4203, heading BR/SR 320, 320 L, 400 only. BR 320 L has an exact retained catalog binding; no separate SR 320 L catalog identity is established from the compressed heading. No extension to 340/380/420 successors, current stock or verified physical interchange is implied. No hardware operation was performed.

Source: TI 40/1998, p. 1 · TI 40/1998, p. 2 — Section1 complete,353TI018 KN section and353TI019 KN exploded figure; cap row,serial and remarks1/3.

Part numbers (2)
  • 4203 350 0501 — Original complete fuel filler cap; includes items1–8Previous complete cap; factory supply discontinued · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above
  • 4203 350 0502 — New complete fuel filler cap with two sintered filtersNew complete cap · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above

Historical fitment · BR 320 / BR 320 L / BR 400 / SR 320 / SR 400

BR / SR 320, 320 L, 400: old cap spares and unchanged retainer

Old filters, valve and sealing ring remain spares; cord and ring retain their numbers in both columns.

  • The complete page2 table distinguishes OLD-part availability from NEW-part separability. Items1 and6 are each old filter 0000 358 1810; item2 is old valve 4114 353 1600; item4 is old sealing ring 0000 992 2701. All four rows carry remarks2 and3: the original remains available as a spare, but the new version is not available separately. This qualification must not be erased by the general future complete-cap supply statement.
  • Item3 tank vent has -*- in both original and new columns and only remark3. Item5 inner cap 4133 350 2500 includes item6; its new column is -*- and it has only remark3. Neither row has remark2, so continued old spare availability is not established for the tank vent or inner cap. The -*- placeholder is not a part number, a zero or proof of dimensional sameness.
  • Item7 cord 0000 350 0900 and item8 ring 0000 353 0701 have identical numbers in old and new columns, with blank remark cells. These are the separately supplied retainer components. Figure353TI019 KN shows the cord between the inner cap and retaining ring; the retained2012 catalog calls the cord Rope. No altered cord length or substitution is inferred.
  • Old internal service parts remain tied to the old cap; they are not a bill of materials for rebuilding the new cap. The cap production cutoff 2 39 791 866 does not establish a separate date or serial change for the unchanged cord/ring.
  • Historical TI 40/1998, series 4203, heading BR/SR 320, 320 L, 400 only. BR 320 L has an exact retained catalog binding; no separate SR 320 L catalog identity is established from the compressed heading. No extension to 340/380/420 successors, current stock or verified physical interchange is implied. No hardware operation was performed.

Source: TI 40/1998, p. 1 · TI 40/1998, p. 2 — 353TI019 KN all8 callouts; full page2 cap summary including both filter rows,placeholders,inclusion ranges and every remark.

Part numbers (6)
  • 0000 358 1810 — Original filter; appears at both items1 and6Original remains spare; new filter not separate · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above
  • 4114 353 1600 — Original valve; item2Original remains spare; new valve not separate · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above
  • 0000 992 2701 — Original sealing ring; item4Original remains spare; new ring not separate · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above
  • 4133 350 2500 — Original inner cap; item5 includes item6Old continued supply not stated; new cap not separate · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above
  • 0000 350 0900 — Cord / retained catalog Rope; item7Unchanged, separately supplied retainer · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above
  • 0000 353 0701 — Ring; item8Unchanged, separately supplied retainer · BR/SR 320, 320 L, 400 as headed in TI40/1998; exact catalog models listed above

Wrong number or missing part for the SR 320, SR 400? Report a correction →