Stihl 4221 · Section C · 3 of 20 · 11 parts
Tank vent 1 44 493 244 (47.1999)
Fits TS 460.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (11)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4221 350 5801 | Tank vent Fitment / change note → | 1 |
| 2 | 0000 358 1812 | Filter Fitment / change note → | 1 |
| 3 | 4114 353 1600 | Valve → replaced by 1128 353 1600 TI 25/1996 | 1 |
| 4 | 0000 358 1810 | Filter | 1 |
| 5 | 4223 353 2300 | Cap | 1 |
| 6 | 1129 141 8600 | Hose 102 mm | 1 |
| 7 | not sold separately | Hose 3.1x5.7x135 mm, R3 not available as a separate item | 1 |
| 8 | 0000 350 3502 | Pickup body | 1 |
| 9 | 4221 353 9200 | Grommet | 1 |
| 10 | 4221 351 1500 | Expansion tank | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 930 2803 | Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · TS 460
TS 460 tank vent: second filter1812 seats flush to the collar
Vent 4221 350 5801 stays unchanged; added filter is 0000 358 1812, not the TS 400 filter.
- A SECOND sintered filter, item 1, is added to protect the vent valve against contamination. Cross-section 337TI008KN shows it at the lower vent opening, distinct from the existing upper filter. When replacing it, press it ONLY UNTIL FLUSH AGAINST THE COLLAR. No numeric seating depth or vent-pressure specification is given.
- The summary retains tank vent 4221 350 5801 and adds included filter 0000 358 1812. Other parts as before. This is addition of a second filter, not replacement of the earlier upper filter or authority to substitute TS 400 filter 0000 358 1811 from TI 45.
- Introduction is a RUNNING CHANGE, with no numeric serial. The unchanged vent continues while stocks last. Neither the retained number nor HS 276 B carburetor serialX33 998 043 identifies second-filter contents.
- The exactTS460 tank-vent IPL provides navigation for these two numbers but has its own1999/1 44 493 244 applicability. That later sheet does not set this1996 introduction boundary. Last-TI 49.95 and documentation 5930/copyright 1996 are provenance, not additional fitment assertions.
- This is historical source guidance, not present stock or a verified physical interchange. Later IPL sheets are navigation, not a reconstruction of the 1996 configuration. No hardware operation was performed.
Source: TI 46/1996, p. 3 — TS 460 tank vent: second filter1812 seats flush to the collar.
Part numbers (2)
- 4221 350 5801 — Tank ventUnchanged number; second filter added · TS 460; historical unchanged stock remains possible
- 0000 358 1812 — Second sintered filter, item 1New lower filter · TS 460 vent; press only flush to collar; not TS 4001811
Wrong number or missing part for the TS 460? Report a correction →