← TS 460

Stihl 4221 · Section D · 4 of 20 · 12 parts

Clutch

Fits TS 460.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111223456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (12)

PosPart numberDescriptionQty
1 4221 162 1000 Cover washer 1
2 4221 160 2000 Clutch 1
3 1122 162 0800 Clutch shoe 3
4 0000 997 0911 Tension spring → replaced by 0000 997 0912 TI 10/2008 3
5 1122 162 3005 Retainer 3
6 1125 647 7800 Washer 1
7 0000 993 0509 Ring 1
8 4221 700 2500 V-belt pulley 1
9 9529 003 4181 Needle cage 1516 2 1
10 0000 958 1024 Washer 1
11 4221 195 0600 Starter cup → replaced by 4224 190 0550 TI 26/2008 1
12 9211 260 1340 Hexagon nut M10x1 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · TS 460

TS 460 crankshaft blocking: only new strip 4221 893 5900

Former locking strips damage the piston; size-21 long insert 5910 893 5616 is for the clutch.

  • Page 8 section 6.1 and the two tool illustrations identify item 1 locking strip 4221 893 5900 for blocking the crankshaft, and item 2 size-21 long insert 5910 893 5616 for releasing/tightening the clutch. Item numbers 1 and 2 are figure callouts, not quantities or alternative part numbers.
  • ONLY the new locking strip (item 1) may be used to block the TS 460 crankshaft. The source explicitly warns that former STIHL servicing-tool locking strips WILL DAMAGE THE PISTON. Neither the generic locking pin in standard accessories nor a superficially similar strip overrides that warning.
  • The new strip is also stated to suit all STIHL engines with a CENTRAL, VERTICAL SPARK-PLUG SEAT. Both geometric conditions remain required; no list of additional exact models or permission for angled/off-centre plug seats is inferred.
  • The drawings show tool form only, not dimensions for manufacturing a substitute. No clutch torque or removal direction is given in this section, and no crankshaft was blocked.
  • Historical TI 43/1995 description of TS 460, type 4221, not current supply, measured performance or a complete repair procedure. No hardware operation was performed. The sheet link identifies the exact model/component only; no later IPL revision is backdated to 1995.

Source: TI 43/1995, p. 8 — TS 460 crankshaft blocking: only new strip 4221 893 5900.

Part numbers (2)
  • 4221 893 5900 — New locking strip, item 1specified · Required to block TS 460 crankshaft; broader statement limited to central, vertical spark-plug seats
  • 5910 893 5616 — Size 21 insert, long, item 2specified · Releasing/tightening TS 460 clutch

Wrong number or missing part for the TS 460? Report a correction →