← BR 106

Stihl 4222 · Section C · 3 of 7 · 31 parts

Ignition system

Fits BR 106.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425262728293456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (31)

PosPart numberDescriptionQty
1 4222 400 1200 Flywheel Fitment / change note → 1
2 0000 958 1026 Washer 1
3 9211 260 1360 Hexagon nut M10x1.25 1
4 4222 400 1300 Ignition coil Fitment / change note → 1
5 not sold separately Ignition lead 325 mm not available as a separate item 1
6 0000 989 1010 Grommet 1
7 4222 440 1100 Short circuit wire 1
8 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 2
9 4222 405 0800 Grommet 2
10 4112 432 9202 Grommet 1
11 4126 400 1001 Trigger unit Fitment / change note → 1
12 9022 313 0610 Spline screw IS-M4x6 1
13 4222 704 7900 Washer
14 4222 700 3400 Fanwheel 1
15 9022 341 0980 Spline screw IS-M5x16 4
16 4222 129 0900 Gasket 1
17 4222 120 2200 Flange 1
18 9291 021 0120 Washer 5.3 2
19 9022 341 1050 Spline screw IS-M5x25 2
20 4129 129 0900 Gasket 1
21 4222 120 0600 Carburetor C1Q-SK6A 1
22 4114 149 1205 Gasket 1
23 4222 141 1500 Flange 1
24 4222 121 6900 Baffle 1
25 9022 341 1220 Spline screw IS-M5x48 2
26 4222 141 2200 Manifold 1
27 0000 350 3502 Pickup body 1
28 4222 358 7700 Hose with grommet 1
29 0000 358 1800 Filter 1
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m option 1
— 0000 930 2251 Ignition lead 10 m option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · BR 106

BR 106: series 4222 replacement ignition assignment

4222 400 1300 + 4126 400 1001 with flywheel 4222 400 1200; 325 mm ignition lead.

  • Printed series 4222. Use 4222 400 1300 and 4126 400 1001 with flywheel 4222 400 1200.
  • Printed ignition-lead length: 325 mm (12 13/16 in). Preserve both printed units.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
  • Footnote 1 identifies an ignition coil; footnote 2 identifies a separate trigger unit. These are components of the listed system, not two interchangeable replacement modules.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.

Part numbers (3)
  • 4222 400 1300 — Ignition coilAssigned component · BR 106, printed series 4222, listed combination only
  • 4126 400 1001 — Trigger unitAssigned component · BR 106, printed series 4222, listed combination only
  • 4222 400 1200 — Assigned flywheelRequired pairing · BR 106, printed series 4222

Wrong number or missing part for the BR 106? Report a correction →