← HS 72, HS 74, HS 76 · HS 75, HS 80, HS 85

Stihl 4226 · Section G · 7 of 10 · 35 parts

Cutter bar 550mm / 22'', 700mm / 28'', 1000mm / 40''

Fits HS 72, HS 74, HS 76.

Parts diagrams →

Historical fitment & changes (9) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11101011111213131415161719220212223242526272833334456778899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (35)

PosPart numberDescriptionQty
1 4226 641 4600 Guide 550 mm / 22'' 2
2 4226 710 6052 Blade 550 mm 1
3 4226 713 6600 Pin Fitment / change note → 2
4 4226 713 1700 Flat spring 550 mm 1
5 4226 790 9100 Blade guard 550 mm / 22'' 1
6 4226 792 9101 Cutter guard 1
7 9022 341 0980 Spline screw IS-M5x16 Fitment / change note →
8 9220 260 0701 Hexagon nut M5 Fitment / change note →
9 4226 648 6700 Slider Fitment / change note →
10 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 2
11 4226 641 4601 NLA Guide 700 mm / 28'' 2
12 4226 710 6057 NLA Blade 700 mm 1
13 4226 713 1701 Flat spring 700 mm 1
14 4226 790 9104 NLA Blade guard 700 mm / 28'' 1
15 not sold separately Blade 550 mm not available as a separate item 1
16 not sold separately Blade 550 mm not available as a separate item 1
17 4226 790 9101 NLA Blade guard 550 mm / 22'' 1
19 4226 792 9000 Guide guard Fitment / change note → 1
20 not sold separately Blade 700 mm not available as a separate item 1
21 not sold separately Blade 700 mm not available as a separate item 1
22 4226 790 9102 NLA Blade guard 700 mm / 28'' 1
23 4226 641 4603 NLA Guide 1000 mm / 40'' Fitment / change note → 1
24 4226 713 1703 NLA Flat spring 1000 mm Fitment / change note → 1
25 not sold separately Blade 1000 mm / 40" not available as a separate item 1
26 not sold separately Blade 1000 mm / 40" not available as a separate item 1
27 4226 790 9105 NLA Blade guard 1000 mm / 40" Fitment / change note → 1
28 4226 740 3350 NLA Catcher blade 700 mm, 1000 mm Fitment / change note → option 1
Not numbered on the diagram — assemblies, kits and options
— 4226 710 5901 Cutter bar assy. 550 mm Fitment / change note → 1
— 4226 710 5941 NLA Cutter bar assy. 700 mm Fitment / change note → 1
— 4226 710 5911 NLA Cutter bar assy. 550 mm Fitment / change note → 1
— 4226 710 6056 NLA Blade 550 mm 1
— 4226 710 5921 NLA Cutter bar assy. 700 mm Fitment / change note → 1
— 4226 710 6058 NLA Blade 700 mm 1
— 4226 710 5951 NLA Cutter bar assy. 1000 mm Fitment / change note → 1
— 4226 710 6060 NLA Blade 1000 mm / 40" 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 76

HS 76: 1000 ES cutter-bar assembly and fitted quantities

Assembly includes items 1–9, not separately listed blade guard item 10.

  • New cutter-bar assembly 1000 ES 4226 710 5950 for HS 76 includes items 1–9: blades 1000 (1,2), each including pin(3); guide 1000(4); flat spring 1000(5); NINE sliders(6); SIX IS-M5 x 16 screws(7); SIX M5 nuts(8); guide guard(9). Blade guard 1000 item 10 is separately listed, not claimed included.
  • Blade MOQ 4, pin MOQ 5, slider MOQ 10, screw MOQ 20 and nut MOQ 10 are ORDER quantities, not assembly fitting counts. No serial or permission to extend HS 76 1000 ES assembly to HS 72/74 from shared IPL sheet.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 4 — HS 76: 1000 ES cutter-bar assembly and fitted quantities.

Part numbers (11)
  • 4226 710 5950 — Cutter-bar assembly1000 ESincludes1–9 · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 710 6007 — Blade1000 item1includes pin · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 710 6008 — Blade1000 item2includes pin · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 713 6600 — Pin item3included with each blade · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 641 4603 — Guide1000 item4included · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 713 1703 — Flat spring1000 item5included · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 648 6700 — Slider item69 fitted · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 9022 341 0980 — IS-M5 x16 screw item76 fitted · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 9220 260 0701 — M5 nut item86 fitted · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 792 9000 — Guide guard item9included · HS 76: 1000 ES cutter-bar assembly and fitted quantities
  • 4226 790 9105 — Blade guard1000 item10separately listed · HS 76: 1000 ES cutter-bar assembly and fitted quantities

Service note · HS 76

HS 76: cutter guard removed from historical standard equipment

Deleted cutter guard is not the guide guard or transport blade guard.

  • Cutter guard 4226 792 9105 deleted on ALL HS 76 versions to increase cutting capacity. This is a historical equipment change, not a general instruction to remove guards from machines. Do not confuse it with guide guard 4226 792 9000 or blade guard 4226 790 9105. No production serial or other-model applicability provided.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 5 — HS 76: cutter guard removed from historical standard equipment.

Part numbers (3)
  • 4226 792 9105 — Cutter guarddeleted on HS76 · HS 76: cutter guard removed from historical standard equipment
  • 4226 792 9000 — Guide guarddistinct part; not this deletion · HS 76: cutter guard removed from historical standard equipment
  • 4226 790 9105 — Blade guard1000distinct part; not this deletion · HS 76: cutter guard removed from historical standard equipment

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76: cutter locknut property class matched to screw

New M 5 locknut replaces old nut on all cutter-bar versions.

  • M5 locknut 9220 260 0701 replaces 9216 263 0700 on ALL cutter-bar versions of the named models. New property class matches IS-M5 x 16 screw 9022 341 0980 for reliability; numeric grade and torque not supplied. Old locknut remains supplied for OTHER MODELS. Introduction IN PROGRESS, no serial.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 5 — HS 72 / 74 / 76: cutter locknut property class matched to screw.

Part numbers (3)
  • 9216 263 0700 — M5 locknutold; other models · HS 72 / 74 / 76: cutter locknut property class matched to screw
  • 9220 260 0701 — M5 locknutnew matched property class · HS 72 / 74 / 76: cutter locknut property class matched to screw
  • 9022 341 0980 — IS-M5 x16 screwmatching screw · HS 72 / 74 / 76: cutter locknut property class matched to screw

Service note · HS 76

HS 76: optional catcher plate keeps cuttings off the hedge

Cutter-bar-mounted accessory is not standard equipment or a guard replacement.

  • Catcher plate 4226 740 3350 is a future SPECIAL ACCESSORY, mounted on cutter bar as a shovel to remove cuttings rather than let them fall back onto hedge. Detailed instruction sheet accompanies it. Exploded and assembled views show plate alongside cutter bar; no dimensions, torque or unprovided installation procedure inferred. TI 31.92 reference is bibliography, not accepted manual. Footer June 29,1994.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 8 — HS 76: optional catcher plate keeps cuttings off the hedge.

Part numbers (1)
  • 4226 740 3350 — Catcher plateoptional HS76 accessory · HS 76: optional catcher plate keeps cuttings off the hedge

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: 550 DS (21 in) longer-slot blade assembly

Check first slot: old 28 mm, new 31 mm; old blades forbidden on new gearbox.

  • Figure 366TI014 KN measures the FIRST SLOT: old 28 mm (1.10 in), new 31 mm (1.22 in). Check this slot before fitting individual blades. ORIGINAL-TYPE BLADES MUST NOT be used with the NEW gearbox. New assemblies should also be used for older machines (remark 2); this is not authorization to mix gearbox parts.
  • Table item 3 assembly includes the listed blade. All other parts remain as before. Every listed original assembly/blade is supplied only while factory stocks last (remark 1).
  • TI length labels are retained exactly; later IPL inch labels and later blade revisions do not silently replace them. Existing catalog rows, notes, positions and later serial restrictions remain unchanged.
  • X 36 209 590 applies ONLY to item 10, the 700 ES assembly. It is not a universal blade or gearbox cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 4 — HS 72–85: 550 DS (21 in) longer-slot blade assembly.

Part numbers (4)
  • 4226 710 5900 — Original cutting blade assembly 550 DS (21 in)original version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 5901 — New cutting blade assembly 550 DS (21 in)new version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6000 — Original 550 DS (21 in) bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6020 — New 550 DS (21 in) bladenew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: 700 DS (27 in) longer-slot blade assembly

Check first slot: old 28 mm, new 31 mm; old blades forbidden on new gearbox.

  • Figure 366TI014 KN measures the FIRST SLOT: old 28 mm (1.10 in), new 31 mm (1.22 in). Check this slot before fitting individual blades. ORIGINAL-TYPE BLADES MUST NOT be used with the NEW gearbox. New assemblies should also be used for older machines (remark 2); this is not authorization to mix gearbox parts.
  • Table item 5 assembly includes the listed blade. All other parts remain as before. Every listed original assembly/blade is supplied only while factory stocks last (remark 1).
  • TI length labels are retained exactly; later IPL inch labels and later blade revisions do not silently replace them. Existing catalog rows, notes, positions and later serial restrictions remain unchanged.
  • X 36 209 590 applies ONLY to item 10, the 700 ES assembly. It is not a universal blade or gearbox cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 4 — HS 72–85: 700 DS (27 in) longer-slot blade assembly.

Part numbers (4)
  • 4226 710 5940 — Original cutting blade assembly 700 DS (27 in)original version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 5941 — New cutting blade assembly 700 DS (27 in)new version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6003 — Original 700 DS (27 in) bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6023 — New 700 DS (27 in) bladenew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: 550 ES (21 in) longer-slot blade assembly

Check first slot: old 28 mm, new 31 mm; old blades forbidden on new gearbox.

  • Figure 366TI014 KN measures the FIRST SLOT: old 28 mm (1.10 in), new 31 mm (1.22 in). Check this slot before fitting individual blades. ORIGINAL-TYPE BLADES MUST NOT be used with the NEW gearbox. New assemblies should also be used for older machines (remark 2); this is not authorization to mix gearbox parts.
  • Table item 7 assembly includes the listed top and bottom blades. All other parts remain as before. Every listed original assembly/blade is supplied only while factory stocks last (remark 1).
  • TI length labels are retained exactly; later IPL inch labels and later blade revisions do not silently replace them. Existing catalog rows, notes, positions and later serial restrictions remain unchanged.
  • X 36 209 590 applies ONLY to item 10, the 700 ES assembly. It is not a universal blade or gearbox cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 4 — HS 72–85: 550 ES (21 in) longer-slot blade assembly.

Part numbers (6)
  • 4226 710 5910 — Original cutting blade assembly 550 ES (21 in)original version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 5911 — New cutting blade assembly 550 ES (21 in)new version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6001 — Original 550 ES (21 in) top bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6021 — New 550 ES (21 in) top bladenew version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6002 — Original 550 ES (21 in) bottom bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6022 — New 550 ES (21 in) bottom bladenew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: 700 ES (27 in) longer-slot blade assembly

Check first slot: old 28 mm, new 31 mm; old blades forbidden on new gearbox.

X 36 209 590 — Item 10, 700 ES assembly only; not every blade.

  • Figure 366TI014 KN measures the FIRST SLOT: old 28 mm (1.10 in), new 31 mm (1.22 in). Check this slot before fitting individual blades. ORIGINAL-TYPE BLADES MUST NOT be used with the NEW gearbox. New assemblies should also be used for older machines (remark 2); this is not authorization to mix gearbox parts.
  • Table item 10 assembly includes the listed top and bottom blades. All other parts remain as before. Every listed original assembly/blade is supplied only while factory stocks last (remark 1).
  • TI length labels are retained exactly; later IPL inch labels and later blade revisions do not silently replace them. Existing catalog rows, notes, positions and later serial restrictions remain unchanged.
  • X 36 209 590 applies ONLY to item 10, the 700 ES assembly. It is not a universal blade or gearbox cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 4 — HS 72–85: 700 ES (27 in) longer-slot blade assembly.

Part numbers (6)
  • 4226 710 5920 — Original cutting blade assembly 700 ES (27 in)original version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 5921 — New cutting blade assembly 700 ES (27 in)new version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6004 — Original 700 ES (27 in) top bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6024 — New 700 ES (27 in) top bladenew version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6005 — Original 700 ES (27 in) bottom bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6025 — New 700 ES (27 in) bottom bladenew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: 1000 ES (39 in) longer-slot blade assembly

Check first slot: old 28 mm, new 31 mm; old blades forbidden on new gearbox.

  • Figure 366TI014 KN measures the FIRST SLOT: old 28 mm (1.10 in), new 31 mm (1.22 in). Check this slot before fitting individual blades. ORIGINAL-TYPE BLADES MUST NOT be used with the NEW gearbox. New assemblies should also be used for older machines (remark 2); this is not authorization to mix gearbox parts.
  • Table item 13 assembly includes the listed top and bottom blades. All other parts remain as before. Every listed original assembly/blade is supplied only while factory stocks last (remark 1).
  • TI length labels are retained exactly; later IPL inch labels and later blade revisions do not silently replace them. Existing catalog rows, notes, positions and later serial restrictions remain unchanged.
  • X 36 209 590 applies ONLY to item 10, the 700 ES assembly. It is not a universal blade or gearbox cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 4 — HS 72–85: 1000 ES (39 in) longer-slot blade assembly.

Part numbers (6)
  • 4226 710 5950 — Original cutting blade assembly 1000 ES (39 in)original version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 5951 — New cutting blade assembly 1000 ES (39 in)new version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6007 — Original 1000 ES (39 in) top bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6027 — New 1000 ES (39 in) top bladenew version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6008 — Original 1000 ES (39 in) bottom bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6028 — New 1000 ES (39 in) bottom bladenew version · TI04/1997 exact named HS models and version restrictions

Wrong number or missing part for the HS 72, HS 74, HS 76? Report a correction →