← HS 72, HS 74, HS 76 · HS 75, HS 80, HS 85

Stihl 4226 · Section L · 11 of 17 · 27 parts

Cutter bar HS 85 1 45 528 443 (46.1999)

Fits HS 85.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1110111212131415161718192202122344567789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (27)

PosPart numberDescriptionQty
1 4226 641 4600 Guide 550 mm / 22'' 2
2 not sold separately Blade 550 mm not available as a separate item 1
3 not sold separately Blade 550 mm not available as a separate item 1
4 4226 713 6600 Pin 1
5 4226 713 1700 Flat spring 550 mm 1
6 4226 790 9101 NLA Blade guard 550 mm / 22'' 1
7 4226 641 4601 NLA Guide 700 mm / 28'' 2
8 not sold separately Blade 700 mm not available as a separate item 1
9 not sold separately Blade 700 mm not available as a separate item 1
10 4226 713 1701 Flat spring 700 mm 1
11 4226 790 9102 NLA Blade guard 700 mm / 28'' 1
12 4226 641 4603 NLA Guide 1000 mm / 40'' 2
13 not sold separately Blade 1000 mm / 40" not available as a separate item 1
14 not sold separately Blade 1000 mm / 40" not available as a separate item 1
15 4226 713 1703 NLA Flat spring 1000 mm 1
16 4226 790 9105 NLA Blade guard 1000 mm / 40" 1
17 4226 648 6700 Slider
18 9022 341 0980 Spline screw IS-M5x16
19 9220 263 0702 Hexagon nut M5
20 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 2
21 4226 792 9000 Guide guard 1
22 4226 740 3350 NLA Catcher blade 700 mm, 1000 mm option 1
Not numbered on the diagram — assemblies, kits and options
— 4226 710 5911 NLA Cutter bar assy. 550 mm Fitment / change note → no longer available from factory 1
— 4226 710 6056 NLA Blade 550 mm 1
— 4226 710 5921 NLA Cutter bar assy. 700 mm Fitment / change note → no longer available from factory 1
— 4226 710 6058 NLA Blade 700 mm 1
— 4226 710 6060 NLA Blade 1000 mm / 40" 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: 550 ES (21 in) longer-slot blade assembly

Check first slot: old 28 mm, new 31 mm; old blades forbidden on new gearbox.

  • Figure 366TI014 KN measures the FIRST SLOT: old 28 mm (1.10 in), new 31 mm (1.22 in). Check this slot before fitting individual blades. ORIGINAL-TYPE BLADES MUST NOT be used with the NEW gearbox. New assemblies should also be used for older machines (remark 2); this is not authorization to mix gearbox parts.
  • Table item 7 assembly includes the listed top and bottom blades. All other parts remain as before. Every listed original assembly/blade is supplied only while factory stocks last (remark 1).
  • TI length labels are retained exactly; later IPL inch labels and later blade revisions do not silently replace them. Existing catalog rows, notes, positions and later serial restrictions remain unchanged.
  • X 36 209 590 applies ONLY to item 10, the 700 ES assembly. It is not a universal blade or gearbox cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 4 — HS 72–85: 550 ES (21 in) longer-slot blade assembly.

Part numbers (6)
  • 4226 710 5910 — Original cutting blade assembly 550 ES (21 in)original version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 5911 — New cutting blade assembly 550 ES (21 in)new version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6001 — Original 550 ES (21 in) top bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6021 — New 550 ES (21 in) top bladenew version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6002 — Original 550 ES (21 in) bottom bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6022 — New 550 ES (21 in) bottom bladenew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: 700 ES (27 in) longer-slot blade assembly

Check first slot: old 28 mm, new 31 mm; old blades forbidden on new gearbox.

X 36 209 590 — Item 10, 700 ES assembly only; not every blade.

  • Figure 366TI014 KN measures the FIRST SLOT: old 28 mm (1.10 in), new 31 mm (1.22 in). Check this slot before fitting individual blades. ORIGINAL-TYPE BLADES MUST NOT be used with the NEW gearbox. New assemblies should also be used for older machines (remark 2); this is not authorization to mix gearbox parts.
  • Table item 10 assembly includes the listed top and bottom blades. All other parts remain as before. Every listed original assembly/blade is supplied only while factory stocks last (remark 1).
  • TI length labels are retained exactly; later IPL inch labels and later blade revisions do not silently replace them. Existing catalog rows, notes, positions and later serial restrictions remain unchanged.
  • X 36 209 590 applies ONLY to item 10, the 700 ES assembly. It is not a universal blade or gearbox cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 4 — HS 72–85: 700 ES (27 in) longer-slot blade assembly.

Part numbers (6)
  • 4226 710 5920 — Original cutting blade assembly 700 ES (27 in)original version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 5921 — New cutting blade assembly 700 ES (27 in)new version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6004 — Original 700 ES (27 in) top bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6024 — New 700 ES (27 in) top bladenew version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6005 — Original 700 ES (27 in) bottom bladeoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 710 6025 — New 700 ES (27 in) bottom bladenew version · TI04/1997 exact named HS models and version restrictions

Wrong number or missing part for the HS 85? Report a correction →