Stihl 4226 · Section O · 14 of 17 · 14 parts
AV carrier HS 85
Fits HS 85.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (14)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4226 790 3301 | AV carrier | 1 |
| 2 | 4226 791 7200 | Sleeve | 2 |
| 3 | 4226 160 2502 | Brake cable | 1 |
| 4 | 4226 162 5002 | Lever | 1 |
| 5 | 4226 162 5900 | Insert | 1 |
| 6 | 4226 791 2805 | Annular buffer | 3 |
| 7 | 4226 791 9700 | Washer | 3 |
| 8 | 9022 341 1010 | Spline screw IS-M5x18 | 2 |
| 9 | 9022 341 0980 | Spline screw IS-M5x16 | 1 |
| 10 | 4226 791 7300 | Plug | 3 |
| 11 | 4226 791 1701 | Handlebar | 1 |
| 12 | 4226 791 0610 | Clamp | 1 |
| 13 | 9216 261 0700 | Hexagon nut M5 | 2 |
| 14 | 9022 341 1070 | Spline screw IS-M5x30 | 2 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · HS 85
HS 85: blade-guide and handle torques
Three HS85-only values; model-specific fasteners and mounting locations retained.
- HS85 ONLY, Nm: IS-M5x25 blade guide/gear housing 9.5; IS-M5x16 rubber buffer/gear housing 5.5; IS-M5x30 handle halves 2.5. Do not transfer HS75/80 buffer or handle values.
- Current early cutter sheet shows IS-M5x20 while this TI specifies IS-M5x25 for the blade guide; preserve the configuration/fastener difference. Later cutter-sheet serial boundaries are not supplied by this TI and are not inferred here.
- Historical HS 75, HS 80 and HS 85 type 4226 evidence, restricted to the models named in this note. Replacement of HS 72/74/76 is not parts interchangeability. No serial cutoff or calendar introduction date is supplied. No hardware operation was performed.
Source: TI 17/1996, p. 1 · TI 17/1996, p. 7 — HS85 blade-guide and handle torques.
No additional parts-table entry added.
Wrong number or missing part for the HS 85? Report a correction →