← BG 45, BG 46, BG 55, BG 65, BG 85 · BR 45 C · SH 55, SH 85

Stihl 4229 · Section N · 12 of 17 · 25 parts

Fan housing inside SH 55 (04.2001), (45.2001), (18.2002)

Fits SH 55.

Parts diagrams →

Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131314151618192202122232425263456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (25)

PosPart numberDescriptionQty
1 4229 700 4153 Fan housing, inside 1
2 not sold separately Fan housing, inside no longer available from factory 1
3 9443 825 7130 Hollow rivet 7.5x1x6.8 3
4 4203 350 5801 NLA Tank vent → replaced by 0000 350 5800 TI 18/2002 1
5 4223 353 9201 Grommet 1
6 4229 358 7702 Hose 1
7 0000 350 3502 Pickup body 1
8 0000 967 3700 Warning pictogram HS 1
9 0000 967 3693 Warning pictogram Filler cap 1
10 0000 967 3500 NLA Instruction label 1
11 9075 478 4159 Pan head self-tapping screw IS-D5x24 3
12 0000 350 0517 Filler cap 1
13 0000 350 0900 Rope 1
14 9645 951 3890 O-ring 35x3-FPM 80 1
15 0000 350 0525 Filler cap 1
16 9645 948 7734 O-ring 25x3.5 1
18 1113 182 8901 Pin 1
19 0000 997 0603 Compression spring 1
20 4228 182 9300 Starting throttle lock 1
21 9074 478 4425 Pan head self-tapping screw IS-P6x19 3
22 4229 430 0202 Stop switch 1
23 4229 440 1900 Lead 2
24 4229 182 1005 Throttle trigger 1
25 4229 180 1101 Throttle cable 1
26 4229 740 7100 Antistatic wire 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BG 55 / BG 65 / BG 85 / SH 55 / SH 85

BG/SH 55, 65, 85: later tank-vent replacement variants

The manual overlaps “up to 2002” and “from 2002”; grommet and sealing-ring versions remain distinct without a serial cutoff.

  • Later component evidence: January 2005, not a contemporaneous 1999 instruction or proof of original equipment. The introduction covers BG 45/46/55/65/85 and SH 55/85; this TI29-linked note is limited to BG 55/65/85 and SH 55/85 and the explicitly stated component variants. Catalog assembly links are navigation, not proof that all revisions fit.
  • Section 9.5.2, printed 33 / PDF34, calls for vent replacement if pressure does not equalize. Remove the filter housing via 9.1.1 and note the vent installed position. Unlike the incorrect carburetor-removal reference elsewhere,9.1.1 includes filter-housing removal; it is not corrected to the choke section 9.1.2.
  • For machines labeled up to 2002, pull out the vent and then its grommet. Install in reverse sequence. For machines labeled from 2002, carefully pry out the vent together with its sealing ring, always use a new sealing ring, and install in reverse sequence. The middle-column new-ring sentence continues the from 2002 branch.
  • The source includes 2002 in both labels and gives no exact date or serial boundary. Inspect the actual vent assembly; do not normalize the overlap to before/after 2002 or infer interchangeability. Grommet and sealing ring are distinct illustrated items, not established substitutes. No vent, ring or grommet number, insertion depth or torque is supplied. Assembly destinations show related housing families, not a verified changeover or fit for every catalog revision.
  • The component manual requires the instruction manual safety precautions and applicable local regulations for any engine run. Fuel work is outdoors only, away from fire, flame, sparks or heat; wipe up spilled fuel immediately. These are source-reviewed reference notes, not a complete repair instruction or hardware verification. Exact owner-manual and remaining component dependencies stay open.

TI dependency: TI 29/1999, p. 5 — TI29 section5.3 component dependency; January2005 later tank-vent replacement variants.

Later manual evidence: STIHL Series 4140 Components BG, SH service manual (2005-01), section later tank-vent replacement variants, PDF pages 1, 3, 4, 22, 34

No parts-table entry added. Tool references, where present, are retained in the manual notes above.

Service note · BG 55 / BG 65 / BG 85 / SH 55 / SH 85

BG/SH 55, 65, 85: later integral fuel tank and cleaning

The fuel tank is integral with the inner fan housing; damage requires that complete housing, not a separately replaceable tank.

  • Later component evidence: January 2005, not a contemporaneous 1999 instruction or proof of original equipment. The introduction covers BG 45/46/55/65/85 and SH 55/85; this TI29-linked note is limited to BG 55/65/85 and SH 55/85 and the explicitly stated component variants. Catalog assembly links are navigation, not proof that all revisions fit.
  • Section 9.6.1, printed 33 / PDF34: the fuel tank forms part of the inner fan housing and cannot be replaced separately. If damaged, replace the complete inner fan housing. This does not identify a replacement housing number or establish interchange between housing revisions or BG/SH models.
  • The diaphragm pump draws fuel through the hose and pickup-body filter. Fine filter pores can clog with dirt, restricting flow and causing starvation. For fuel-supply trouble, check the tank and pickup body first and clean the tank if necessary. Pickup-body removal 9.6.2 and fuel hoses 9.6.3 are reviewed in separate notes; the general tank note does not replace those access procedures.
  • For cleaning, observe the fuel-system precautions in section 2, unscrew the filler cap and drain the tank; add a small amount of clean gasoline, close the tank and shake the machine vigorously, then open and drain it again. Dispose of fuel properly. The source supplies no volume, solvent substitution, dwell time or present-day repair method for a damaged tank. No fuel handling or hardware test was performed.
  • The component manual requires the instruction manual safety precautions and applicable local regulations for any engine run. Fuel work is outdoors only, away from fire, flame, sparks or heat; wipe up spilled fuel immediately. These are source-reviewed reference notes, not a complete repair instruction or hardware verification. Exact owner-manual and remaining component dependencies stay open.

TI dependency: TI 29/1999, p. 5 — TI29 section5.3 component dependency; January2005 later integral fuel tank and cleaning.

Later manual evidence: STIHL Series 4140 Components BG, SH service manual (2005-01), section later integral fuel tank and cleaning, PDF pages 1, 3, 4, 34

No parts-table entry added. Tool references, where present, are retained in the manual notes above.

Service note · BG 55 / BG 65 / BG 85 / SH 55 / SH 85

BG/SH 55, 65, 85: later fuel pickup-body service

The pickup-body filter is drawn out with the specified hook and checked for contamination; no filter interchange or cleaning method is supplied.

  • Later component evidence: January 2005, not a contemporaneous 1999 instruction or proof of original equipment. The introduction covers BG 45/46/55/65/85 and SH 55/85; this TI29-linked note is limited to BG 55/65/85 and SH 55/85 and the explicitly stated component variants. Catalog assembly links are navigation, not proof that all revisions fit.
  • Section 9.6.2, printed 34 / PDF35: unscrew the filler cap and drain the tank. Use hook 5910 893 8800 to draw the pickup body out of the tank. Pull the pickup body off its fuel hose, check for contamination and replace if necessary. Install in reverse sequence.
  • The hook is a historical servicing tool, not a fuel-system replacement part. The page supplies no pickup-body number, filtering grade, replacement interval or cleaning method for the filter itself. The preceding tank-cleaning instructions do not authorize washing the pickup filter or deleting it. No hose-length or insertion-depth value is given.
  • The component manual requires the instruction manual safety precautions and applicable local regulations for any engine run. Fuel work is outdoors only, away from fire, flame, sparks or heat; wipe up spilled fuel immediately. These are source-reviewed reference notes, not a complete repair instruction or hardware verification. Exact owner-manual and remaining component dependencies stay open.

TI dependency: TI 29/1999, p. 5 — TI29 section5.3 component dependency; January2005 later fuel pickup-body service.

Later manual evidence: STIHL Series 4140 Components BG, SH service manual (2005-01), section later fuel pickup-body service, PDF pages 1, 3, 4, 16, 35

Part numbers (1)
  • 5910 893 8800 — Hook for pickup bodyWithdraw pickup body through tank opening · January2005 fuel pickup-body service; not a replacement filter

Service note · BG 55 / BG 65 / BG 85 / SH 55 / SH 85

BG/SH 55, 65, 85: later fuel-hose removal and layout limits

Fuel-hose service retains the installed position and a wrong starter reference; the following fan-access column is not silently made a hose-removal step.

  • Later component evidence: January 2005, not a contemporaneous 1999 instruction or proof of original equipment. The introduction covers BG 45/46/55/65/85 and SH 55/85; this TI29-linked note is limited to BG 55/65/85 and SH 55/85 and the explicitly stated component variants. Catalog assembly links are navigation, not proof that all revisions fit.
  • Section 9.6.3, printed 34 / PDF35, middle column: unscrew the filler cap and drain the tank, remove the fan housing with rewind starter, remove the carburetor via 9.2.2, remove the pickup body and pull off the tank vent via 9.5.2. Pull out the fuel hoses as illustrated, note their installed position and reinstall in reverse sequence.
  • The housing/starter instruction prints reference 7.2, but 7.2 is rope rotor/pawl; fan housing with rewind starter is section 7.1. The earlier reviewed starter-access note supplies that context. Preserve the printed cross-reference error without requiring a rotor/pawl teardown for hose access.
  • The middle column ends with reverse assembly. The unheaded right column then discusses spark-plug removal, piston locking and model-specific outer fan-housing removal, continued on the next page under 10.1 Fanwheel. Its placement before that heading is retained as a layout ambiguity; the separate fan procedure is reviewed in its own later-manual note. Do not silently append piston locking or fanwheel removal to the fuel-hose procedure.
  • No hose number, length, bore, routing dimensions, sealant, substitute material or hose interchange is supplied here. The drawing indicates withdrawal and installed position, not a fully dimensioned routing specification. Vent variants remain subject to their overlapping 2002 labels; catalog housing links do not select a machine revision.
  • The component manual requires the instruction manual safety precautions and applicable local regulations for any engine run. Fuel work is outdoors only, away from fire, flame, sparks or heat; wipe up spilled fuel immediately. These are source-reviewed reference notes, not a complete repair instruction or hardware verification. Exact owner-manual and remaining component dependencies stay open.

TI dependency: TI 29/1999, p. 5 — TI29 section5.3 component dependency; January2005 later fuel-hose removal and layout limits.

Later manual evidence: STIHL Series 4140 Components BG, SH service manual (2005-01), section later fuel-hose removal and layout limits, PDF pages 1, 3, 4, 16, 35

No parts-table entry added. Tool references, where present, are retained in the manual notes above.

Wrong number or missing part for the SH 55? Report a correction →