Stihl 4238 · Section D · 4 of 13 · 23 parts
Rewind starter
Fits TS 410, TS 420.
Historical fitment & changes (9) — includes parts and conditions not shown on this drawing.
Parts (23)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4238 190 0404 | Starter cover Fitment / change note → | 1 |
| 2 | 4238 190 0401 | Starter cover Fitment / change note → | 1 |
| 3 | 1110 084 9102 | Bushing | 1 |
| 4 | 4238 195 9000 | Washer | 1 |
| 5 | 4224 190 0600 | Rewind spring Fitment / change note → | 1 |
| 6 | 9104 003 0410 | Self-tapping screw P3x6 Fitment / change note → | 2 |
| 7 | 4238 190 1001 | Rope rotor Fitment / change note → | 1 |
| 8 | 4238 190 0601 | Rewind spring Fitment / change note → → replaced by 4238 190 0300 TI 21/2009 | 1 |
| 9 | 4223 190 1001 | Rope rotor Fitment / change note → | 1 |
| 10 | 0000 195 7200 | Pawl Fitment / change note → | 1 |
| 11 | 0000 958 0923 | Washer | 1 |
| 12 | 1118 195 3500 | Spring | 1 |
| 13 | 1121 195 3400 | Starter grip Fitment / change note → | 1 |
| 14 | not sold separately | Starter rope Ø 4x995 mm not available as a separate item | 1 |
| 15 | 0000 190 3414 | Starter grip ElastoStart Ø 4.5 mm Fitment / change note → | 1 |
| 16 | 0000 190 2901 | Starter rope Ø 4.5 mm Fitment / change note → → replaced by 0000 190 3500 TI 21/2009 | 1 |
| 17 | 4238 967 1500 | Model plate TS 410 | 1 |
| 18 | 4238 967 1501 | Model plate TS 420 | 1 |
| 19 | 9220 260 1100 | Hexagon nut M8 | 3 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4238 190 0302 | Starter cover with rewind starter Fitment / change note → → replaced by 4238 190 0404, 4238 190 1001 TI 21/2009 | 1 |
| — | 0000 190 3500 | Grip with starter rope Fitment / change note → | 1 |
| — | 0000 930 2297 | Starter rope Ø 4 mm x 30 m Fitment / change note → option | 1 |
| — | 0000 930 2295 NLA | Starter rope Ø 4.5mm / 28 pieces Fitment / change note → option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 410 / TS 420
TS 410 / TS 420: engine, spindle and starter specifications
Engine speeds and spindle speed are different measurements; wheel torque differs by model.
- Both models: stratified-scavenging two-cycle engine, displacement 4.07 cu in (66.7 cm³), bore 1.97 in (50 mm), stroke 1.34 in (34 mm), ISO 7293 power 4.3 hp at 9000 rpm and engine torque 2.8 lbf ft (3.8 Nm). These are historical specifications, not new bench measurements.
- Both models: idle 2500 rpm, clutch engagement 3800 rpm, ENGINE cutoff 10100 rpm; MAXIMUM SPINDLE speed to ANSI B175.4-2006 is separately printed as 5350 rpm. Do not use spindle speed as the engine adjustment limit or silently recalculate one printed value from another.
- Torque AT THE CUTTING WHEEL: TS 410 = 5.6 lbf ft (7.6 Nm); TS 420 = 5.9 lbf ft (8.0 Nm). These are operating torques, NOT fastener-tightening torques.
- Both starters are single-pawl systems. Starter-rope diameter × length is 0.177 in × 37.2 in (4.5 mm × 945 mm). Rounded inch/metric source pairs are preserved; this is not a complete starter replacement procedure.
- Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 37/2007, p. 10 — engine, spindle and starter specifications.
No additional parts-table entry added.
Service note · TS 410 / TS 420
TS 410 / TS 420: gasket kit, carburetor kit and application-specific consumables
Blank application cells are not permission to use every listed compound everywhere.
- Gasket set 4238 007 1003 is for the SHORTBLOCK. Carburetor-parts set 4238 007 1060 is expressly for C1Q-S118; the later shared catalog title C1Q-S118C / C1Q-167A does not extend that kit claim to all variants.
- Lubricating grease 0781 120 1111 (225 g tube) is listed for oil seals, sliding and bearing points. STIHL special lubricant 0781 417 1315 is for the rope-rotor bearing bore and rewind spring in the starter cover. Dirko HT RED 0783 830 2000 is for the engine pan and OUTSIDE of oil seals.
- Press Fluid OH 723 = 0781 957 9000; STIHL multi-purpose grease = 0781 120 1109; Loctite 242 = 0786 111 2101; Loctite 270 = 0786 111 2109; Loctite 648 = 0786 111 2117. Each of these rows has a BLANK USE CELL on the original page. Do not borrow an adjacent row’s use or treat the three Loctite products as interchangeable.
- The unnumbered standard solvent-based degreasant must contain NO CHLORINATED OR HALOGENATED HYDROCARBONS. Its listed use is cleaning mating faces and carburetor, crankshaft stub and flywheel cone. No order number, blend, cure schedule or substitution specification is printed.
- Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 37/2007, p. 15 — gasket kit, carburetor kit and application-specific consumables.
Part numbers (10)
- 4238 007 1003 — Gasket setShortblock · TS 410 / TS 420; source restrictions apply
- 4238 007 1060 — Carburetor parts setC1Q-S118 only as printed · TS 410 / TS 420; source restrictions apply
- 0781 120 1111 — Lubricating grease, 225 gOil seals, sliding and bearing points · TS 410 / TS 420; source restrictions apply
- 0781 417 1315 — STIHL special lubricantRope rotor bore and rewind spring · TS 410 / TS 420; source restrictions apply
- 0781 957 9000 — Press Fluid OH 723Use cell blank · TS 410 / TS 420; source restrictions apply
- 0781 120 1109 — STIHL multi-purpose greaseUse cell blank · TS 410 / TS 420; source restrictions apply
- 0783 830 2000 — Dirko HT redEngine pan and seal exterior · TS 410 / TS 420; source restrictions apply
- 0786 111 2101 — Loctite 242Use cell blank · TS 410 / TS 420; source restrictions apply
- 0786 111 2109 — Loctite 270Use cell blank · TS 410 / TS 420; source restrictions apply
- 0786 111 2117 — Loctite 648Use cell blank · TS 410 / TS 420; source restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: two-stage complete starter replacement
Complete assemblies may retrofit; stage-two individual parts have narrower restrictions.
- Cover identifies TS 410 and TS 420, series 4238. First stage replaces complete starter cover with rewind starter 4238 190 0300 by 4238 190 0301, with more durable rope, rewind spring and pawl. Previous complete 0300 assembly is no longer factory available; complete 0301 can also be used on older machines.
- Second stage replaces complete 4238 190 0301 by 4238 190 0302, adding optimized cover, 4224-series rewind spring and new rotor, while carrying forward the first-stage rope and pawl. Complete 0302 can also be used on older machines. Complete 0301 remains factory available UNTIL availability of complete 0302, not indefinitely.
- Summary rows 1/2 list old assembly items 3,4,5,8 and new items 3,4,6,7,9; rows 12/13 list old items 14–16 and new items 14–17. Other unchanged parts are referred to the spare-parts list; these are not exhaustive bills of materials. The 4224 (TS 700/800) spring reference does not extend whole-starter fitment to those models.
- Introduction is CONTINUOUS with no numeric serial cutoff. Whole-assembly retrofit does NOT authorize fitting the stage-two spring, cover or rotor separately into complete 0300/0301 starters; their section-specific limits control.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 21/2009, p. 1 · TI 21/2009, p. 4 · TI 21/2009, p. 6 — two-stage complete starter replacement.
Part numbers (3)
- 4238 190 0300 — Complete starter cover with rewind starterOriginal; discontinued · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 190 0301 — Complete starter cover with rewind starterFirst stage; transitional supply · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 190 0302 — Complete starter cover with rewind starterSecond stage; older-machine retrofit · TS 410 / TS 420; source revision and pairing restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: new 4 mm rope and retained ElastoStart supply
Cut-length rope comes from bulk stock; the older 4.5 mm system remains supported.
- New grip-with-rope 0000 190 3500 replaces ElastoStart grip Ø 4.5 mm 0000 190 3414 with rope 0000 190 2901 in stage-one starter 4238 190 0301. New assembly includes grip 1121 195 3400 and more durable Ø 4 mm × 995 mm (39-inch) rope; exploded drawing 370TI039 identifies old grip/rope 1/2 and new grip/rope 3/4.
- New 995 mm rope is NOT individually available cut to length: cut it from Ø 4 mm × 30 m (100-foot) bulk stock 0000 930 2297. This replaces Ø 4.5 mm / 28-piece supply 0000 930 2295 for the new system. Summary -*- is no individual cut-length order number, not a missing numerical dimension.
- New grip-with-rope 0000 190 3500 may also be used on older machines with previous ElastoStart grip 0000 190 3414. The previous ElastoStart grip remains available; old rope 0000 190 2901 AND 28-piece supply 0000 930 2295 remain available for machines retaining that previous grip. Do not collapse replacement in new production into universal withdrawal of the old rope system.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 21/2009, p. 2 · TI 21/2009, p. 3 · TI 21/2009, p. 6 — new 4 mm rope and retained ElastoStart supply.
Part numbers (6)
- 0000 190 3414 — ElastoStart grip Ø 4.5 mmPrevious; remains available · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 190 2901 — Starter rope Ø 4.5 mmRetained for previous grip · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 190 3500 — Grip with starter ropeNew; grip plus 995 mm rope · TS 410 / TS 420; source revision and pairing restrictions apply
- 1121 195 3400 — Starter gripIncluded in new assembly · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 930 2297 — Starter rope Ø 4 mm × 30 mBulk stock for 995 mm length · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 930 2295 — Starter rope Ø 4.5 mm / 28 piecesRetained for previous grip · TS 410 / TS 420; source revision and pairing restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: special knots at both ends and flush rotor placement
Preserve the source knot drawing, 4–8 mm tail and upward-facing rotor end.
- Cut the new Ø 4 mm × 995 mm (39-inch) rope using a HOT BLADE or MELT THE ENDS after cutting to prevent unraveling. This is a source service note, not a complete starter repair procedure.
- Use the SPECIAL KNOTS shown in figure 370TI040 at BOTH the new grip 1121 195 3400 and the rope rotor. Protruding length A is 4–8 mm (printed .1–.3 inch). The diagram is the knot specification; no named knot or unverified prose tying sequence is substituted.
- Figure 370TI044: insert the rotor-end special knot into its pocket with the rope end facing UPWARD and FLUSH WITH THE OUTERMOST EDGE of the knot pocket. This avoids contact between rope and pawl spring. The 4–8 mm knot-tail dimension and the installed flush-edge requirement are separate requirements, not contradictory substitutes. No rewind preload turns are supplied.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 21/2009, p. 2 · TI 21/2009, p. 3 — special knots at both ends and flush rotor placement.
Part numbers (2)
- 1121 195 3400 — New starter gripSpecial grip-end knot · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 930 2297 — Ø 4 mm bulk ropeCut to 995 mm; source knots required · TS 410 / TS 420; source revision and pairing restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: first-stage spring and steel-pin pawl
Both new components can also serve the original complete starter.
- In complete starter 4238 190 0301, rewind spring 4282 190 0600 becomes 4238 190 0601; pawl 4116 195 7200 becomes 0000 195 7200. New pawl has a STEEL PIN. Figure 370TI039 labels spring 5 and pawl 6.
- New spring 4238 190 0601 AND pawl 0000 195 7200 can also be used with original complete starter 4238 190 0300. Previous spring 4282 190 0600 and pawl 4116 195 7200 remain available FOR OTHER SERIES; this is not unrestricted cross-series fitment.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 21/2009, p. 3 · TI 21/2009, p. 6 — first-stage spring and steel-pin pawl.
Part numbers (4)
- 4282 190 0600 — Rewind springPrevious; other-series supply · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 190 0601 — Rewind springFirst-stage replacement; original assembly compatible · TS 410 / TS 420; source revision and pairing restrictions apply
- 4116 195 7200 — PawlPrevious; other-series supply · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 195 7200 — Steel-pin pawlNew; original assembly compatible · TS 410 / TS 420; source revision and pairing restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: screw-mounted spring only for stage-two starter
The 4224 spring uses two P3x6 screws on the new cover.
- In complete starter 4238 190 0302, rewind spring 4238 190 0601 is replaced by screw-mounted 4224 190 0600. Figure 370TI041 shows previous spring 1, new spring 2, screws 3 and new cover 4. Mount the new spring on the new cover with TWO P3x6 screws 9104 003 0410.
- New spring 4224 190 0600 may ONLY be installed in machines with complete starter 4238 190 0302. Previous spring 4238 190 0601 remains available for machines with complete starters 4238 190 0300 AND 4238 190 0301. No screw torque, drilling conversion or spring preload is specified.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 21/2009, p. 4 · TI 21/2009, p. 6 — screw-mounted spring only for stage-two starter.
Part numbers (4)
- 4238 190 0601 — Rewind springRetained for 0300/0301 · TS 410 / TS 420; source revision and pairing restrictions apply
- 4224 190 0600 — Screw-mounted rewind springOnly complete 0302 · TS 410 / TS 420; source revision and pairing restrictions apply
- 9104 003 0410 — Screw P3x6Two; spring to new cover · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 190 0302 — Complete starterRequired stage-two context · TS 410 / TS 420; source revision and pairing restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: new starter cover recognized by spring screw holes
The bare cover replacement is restricted to the stage-two complete starter.
- Bare starter cover 4238 190 0401 becomes 4238 190 0404 within complete starter 4238 190 0302. Figure 370TI042 shows old LEFT and new RIGHT; new cover is recognizable by the HOLES for screw-mounting the new rewind spring.
- New bare cover 4238 190 0404 may ONLY be installed in machines with complete starter 4238 190 0302. Old bare cover 4238 190 0401 remains available for complete starters 4238 190 0300 AND 4238 190 0301. Do not confuse bare-cover numbers 0401/0404 with complete-assembly numbers 0300/0301/0302; no drill-to-convert instruction is supplied.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 21/2009, p. 4 · TI 21/2009, p. 6 — new starter cover recognized by spring screw holes.
Part numbers (3)
- 4238 190 0401 — Bare starter coverPrevious; retained for 0300/0301 · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 190 0404 — Bare starter cover with spring screw holesOnly complete 0302 · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 190 0302 — Complete starterStage-two assembly · TS 410 / TS 420; source revision and pairing restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: stage-two rotor and specified bearing lubricant
The new rotor geometry is matched to the new spring and cover.
- Rope rotor 4223 190 1001 is replaced by 4238 190 1001 in complete starter 4238 190 0302. Figure 370TI043 shows old LEFT/new RIGHT and arrows at changed geometry, optimized for the new spring and cover. No dimensions are supplied to machine one rotor into the other.
- New rotor 4238 190 1001 may ONLY be installed in machines with complete starter 4238 190 0302. Previous rotor 4223 190 1001 remains available for complete starters 4238 190 0300 AND 4238 190 0301.
- When repairing the rope rotor, the source says to ENCAPSULATE THE HUB AND PAWL BEARING with lubricant 0781 120 1111. No quantity or generic substitute is specified; this is not permission to lubricate every starter surface indiscriminately.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 21/2009, p. 5 · TI 21/2009, p. 6 — stage-two rotor and specified bearing lubricant.
Part numbers (3)
- 4223 190 1001 — Rope rotorPrevious; retained for 0300/0301 · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 190 1001 — Rope rotorNew; only complete 0302 · TS 410 / TS 420; source revision and pairing restrictions apply
- 0781 120 1111 — LubricantRotor hub and pawl bearing · TS 410 / TS 420; source revision and pairing restrictions apply
Wrong number or missing part for the TS 410, TS 420? Report a correction →