Stihl 4238 · Section H · 8 of 13 · 36 parts
Air filter, Shroud
Fits TS 410, TS 420.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (36)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | not sold separately | Auxiliary filter not available as a separate item | 1 |
| 2 | not sold separately | Air filter not available as a separate item | 1 |
| 3 | 4238 140 1000 | Filter cover Fitment / change note → | 1 |
| 4 | 0000 963 0809 | Bushing Fitment / change note → | 4 |
| 5 | 0000 951 1109 | Screw IS-M5x20 Fitment / change note → | 4 |
| 6 | 4238 080 1600 | Shroud | 1 |
| 7 | 4238 080 1602 | Shroud | 1 |
| 8 | 0000 967 3799 | Warning pictogram TS | 1 |
| 9 | 0000 967 4000 | Warning pictogram Filler cap | 1 |
| 10 | 4238 182 1000 | Throttle trigger | 1 |
| 11 | 9371 470 2640 | Cylindrical pin 5x24 | 1 |
| 12 | 4238 182 4500 | Torsion spring | 1 |
| 13 | 4238 182 0800 | Lockout lever | 1 |
| 14 | 4238 791 0600 | Handle molding | 1 |
| 15 | 9074 477 4130 | Pan head self-tapping screw IS-P5x16 | 2 |
| 16 | 4238 084 7400 | Grommet | 1 |
| 17 | 4238 182 0900 | Switch shaft | 1 |
| 18 | 4238 182 4700 | Flat spring | 1 |
| 19 | 4238 430 0501 | Switch | 1 |
| 20 | 4238 435 6001 | Bracket | 1 |
| 21 | 4238 087 8300 | Rubber buffer | 1 |
| 22 | 4238 087 8301 | Rubber buffer | 1 |
| 23 | 4238 080 2201 | Cap | 1 |
| 24 | 4238 430 6500 | Control panel | 1 |
| 26 | 4238 123 7500 | Grommet | 1 |
| 27 | 9074 478 4425 | Pan head self-tapping screw IS-P6x19 | 4 |
| 28 | 4238 080 2200 | Cap | 1 |
| 29 | 9022 319 0981 | Screw IS-M5x17 | 1 |
| 30 | 4223 967 3700 | Instruction label | 1 |
| 31 | 4238 967 3702 NLA | Instruction label | 1 |
| 32 | 4238 967 3703 NLA | Instruction label | 1 |
| 33 | 0000 967 4054 | Warning Spark arresting screen | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4238 140 4403 | Air filter | 1 |
| — | 4238 140 4404 | Air filter | 1 |
| — | 4238 080 1604 | Shroud | 1 |
| — | 4238 080 1603 | Shroud | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 410 / TS 420
TS 410 / TS 420: cyclone air path and no-cleaning filter rule
Replace the filter at the stated service trigger; do not clean its element.
- Section 1.1 says remove the filter cover and replace the air filter only if there is a noticeable power loss OR more than a year of extended use has elapsed since the last change. DO NOT CLEAN the air filter: the source warns of filter-element damage and consequential engine damage. The average-life claim does not override the power-loss trigger.
- Contaminated air enters tank housing (1); its integrated cyclone spins heavier/larger particles down into the tank housing. The dirty-air stream passes through molded hose (3), to fan-side crankcase half (2), then out of the machine.
- Precleaned air takes the separate route through air filter (4), auxiliary filter (5), then carburetor (6). The illustration separates the tank housing into components only to explain flow; it is not an instruction to split the welded housing.
- Figure item numbers are not filter order numbers. This section supplies neither a filter-cleaning method nor a separate auxiliary-filter service interval, and none is inferred.
- Retained 2007 source guidance, not present-day stock availability. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 37/2007, p. 2 · TI 37/2007, p. 3 · TI 37/2007, p. 9 — TS 410 / TS 420: cyclone air path and no-cleaning filter rule.
No additional parts-table entry added.
Service note · TS 410 / TS 420
TS 410 / TS 420: repair allowances: remaining jobs and no-labor rows
Handling allowance, miscellaneous repairs and no labor have different meanings.
- For trained/qualified personnel in properly equipped shops, in MINUTES: (21) repair/replace clutch, shoes or springs = 20; (22) replace rear handle frame or handle housing = 45; (23) replace muffler = 25; (24) replace air filter or filter housing = 15; (25) repair/replace stop switch INCLUDING circuit testing = 35.
- Row 40 miscellaneous/unlisted repairs = 15. Row 45 HANDLING ALLOWANCE ONLY — NO LABOR = 10. Row 50 NO LABOR = 0. The 10-minute handling allowance is not a repair labor estimate, and the explicit zero in row 50 is not the dash in engine-replacement row 1.
- The table has rows 1–25, 40, 45 and 50: 28 listed activities, NOT 50 rows or 50 completed repairs. The numbering gaps do not imply lost pages. Footer identifies 2007 Technical Documentation D1/MTK-fr; no prices or warranty approval are supplied.
- Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 37/2007, p. 16 — repair allowances: remaining jobs and no-labor rows.
No additional parts-table entry added.
Service note · TS 410 / TS 420
TS 410 / TS 420: new tank housing requires new cover and screws
The tank/filter joint has an explicit serial introduction, unlike the carburetor stages.
- Tank housing 4238 350 0813 becomes 4238 350 0850, with modified threaded inserts for the filter cover (arrows in 370TI048). New tank housing INCLUDES improved filter cover and new screws; summary item 13 includes items 14,15,17 and refers other unchanged parts to the spare-parts list.
- Section 2 states modifications introduced at serial #170 073 909 for the tank housing/filter cover/screw connection. The summary also says introduction CONTINUOUSLY. Preserve BOTH source statements; do not extend this section-specific serial to the carburetor stages or the separately described fan cover, and do not invent a universal early/late matcher.
- Old tank housing is no longer available; new housing can also be used on older machines. Whenever a NEW TANK HOUSING is installed, ALWAYS fasten the NEW FILTER COVER with the NEW SCREWS. Retained old bushings or an unchanged filter-cover number do not waive this requirement.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 22/2009, p. 4 · TI 22/2009, p. 5 · TI 22/2009, p. 7 — new tank housing requires new cover and screws.
Part numbers (4)
- 4238 350 0813 — Tank housingPrevious · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 350 0850 — Tank housing with improved insertsNew; includes new cover/screws · TS 410 / TS 420; source revision and pairing restrictions apply
- 4238 140 1000 — Filter coverNew revision required with new housing · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 951 1109 — New filter-cover screwRequired with new housing · TS 410 / TS 420; source revision and pairing restrictions apply
Service note · TS 410 / TS 420
TS 410 / TS 420: C-index filter cover retains its number but changes bushings
New lead-in screws also change strength class; integrated bushings are not spares.
- Filter cover 4238 140 1000 retains its number. Figure 370TI049 identifies the NEW cover as index C OR HIGHER, with permanently integrated knurled bushings replacing old separate bushing 0000 963 0809. New knurled bushings are NOT available as spare parts; old bushing remains available for previous covers.
- FOUR previous IS-M5x20-12.9 screws 9022 371 1020 are replaced by IS-M5x20-10.9 screws 0000 951 1109. New screws have a LEAD-IN (drawing 6) to simplify mounting. Preserve both 20 mm length and changed 12.9-to-10.9 class; the same M5 size does not make an arbitrary screw equivalent. No tightening torque is given.
- Previous screw remains available FOR OTHER APPLICATIONS. Summary row 14 marks the previous cover version discontinued and the new version usable on older machines, despite the unchanged order number; row 17 permits new screws on older machines. New tank housing still requires BOTH new cover AND new screws. No separate new bushing number is invented from the -*- summary cell.
- Historical English 2009 source for TS 410 and TS 420, series 4238; supply statements are not present-day stock claims. No physical interchange test was performed.
Source: TI 22/2009, p. 5 · TI 22/2009, p. 7 — C-index filter cover retains its number but changes bushings.
Part numbers (4)
- 4238 140 1000 — Filter coverSame number; C-index or higher new version · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 963 0809 — Separate bushingRetained for previous cover · TS 410 / TS 420; source revision and pairing restrictions apply
- 9022 371 1020 — IS-M5x20-12.9 screwPrevious; other-application supply · TS 410 / TS 420; source revision and pairing restrictions apply
- 0000 951 1109 — IS-M5x20-10.9 screw with lead-inNew; four screws · TS 410 / TS 420; source revision and pairing restrictions apply
Wrong number or missing part for the TS 410, TS 420? Report a correction →