Stihl 1111 · Section G · 7 of 13 · 31 parts
Ignition system
Fits 076.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (31)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1111 400 1303 | Ignition module Fitment / change note → → replaced by 1111 400 1301 TI 33/1995 | 1 |
| 2 | not sold separately | Ignition lead 290 mm not available as a separate item | 1 |
| 3 | 0000 989 1010 | Grommet | 1 |
| 4 | 1110 442 7000 NLA | Contact sleeve no longer available from factory | 1 |
| 5 | 1111 448 1200 | Lead retainer | 1 |
| 6 | 1111 405 8800 | Hose | 1 |
| 7 | 9291 021 0120 | Washer 5.3 | 3 |
| 8 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 3 |
| 9 | 1111 404 1204 | Flywheel Fitment / change note → | 1 |
| 10 | 9210 261 1140 | Hexagon nut M8x1 | 1 |
| 11 | 1110 350 0501 | Filler cap | 1 |
| 12 | 1110 353 8102 | Insert | 1 |
| 13 | 0000 951 5800 NLA | Grub screw | 1 |
| 14 | 1120 358 8105 | Vent insert | 1 |
| 15 | 9645 945 2820 | O-ring 25x2.5 | 1 |
| 16 | 1117 350 0905 | Filler cap retainer | 1 |
| 17 | 9099 021 2360 | Self-tapping screw 3.5x9.5 | 1 |
| 18 | 1110 350 0500 | Filler cap | 1 |
| 19 | 1110 353 2108 | Valve body | 1 |
| 20 | 1110 353 1600 | Valve | 1 |
| 21 | 0000 350 3500 | Pickup body | 1 |
| 22 | 1111 358 1500 NLA | Felt sleeve optionno longer available from factory | 1 |
| 23 | 4702 358 7700 | Hose | 1 |
| 24 | 1111 353 2500 | Elbow connector | 1 |
| 25 | not sold separately | Hose 3.1x5.7x135 mm, R3 not available as a separate item | 1 |
| 27 | 9041 216 0300 | Pan head screw M3x4 | 1 |
| 28 | 9045 371 0960 | Socket head screw M5x12 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m option | 1 |
| — | 0000 930 2251 | Ignition lead 10 m option | 1 |
| — | 0000 930 2803 | Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption | 1 |
| — | 0712 923 8004 | Hose 3.1x5.7 mm x 10 m, R3 not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 051 / 076
051 / 076: series 1111 replacement ignition assignment
1111 400 1303 and the listed flywheel pairing for series 1111; 290 mm ignition lead.
- Listed configuration: 1111 400 1303 with flywheel 1111 404 1204.
- Printed ignition-lead length: 290 mm (11 7/16 in). Preserve the printed metric and inch values; no rounding correction is inferred.
- TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
- Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
- Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
- Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
- Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.
Part numbers (2)
- 1111 400 1303 — Replacement ignition moduleAssigned replacement · 051 / 076, series 1111, only with the listed flywheel branch
- 1111 404 1204 — Listed configuration flywheelRequired pairing · 051 / 076, series 1111; listed configuration only
Wrong number or missing part for the 076? Report a correction →