Stihl 1121 · Section D · 4 of 17 · 33 parts
Clutch, Chain sprocket
Fits 026.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (33)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1121 162 3201 | Carrier Fitment / change note → | 1 |
| 2 | 1121 162 3205 | Carrier Fitment / change note → | 1 |
| 3 | 1121 162 0802 | Clutch shoe | 3 |
| 4 | 1127 162 3000 | Retainer Fitment / change note → | 3 |
| 5 | 1121 162 3000 | Retainer Fitment / change note → | 3 |
| 6 | 0000 997 5600 | Tension spring | 3 |
| 7 | 1121 162 1001 | Cover washer Fitment / change note → | 1 |
| 8 | 9512 003 2260 | Needle cage 10x13x10 → replaced by 9512 933 2380 TI 55/2000 | 1 |
| 9 | 9512 933 2260 | Needle cage 10x13x10 | 1 |
| 10 | 1121 640 2004 | Chain sprocket 0.325" 7T | 1 |
| 11 | 1121 640 2005 | Chain sprocket 0.325" 8T option | 1 |
| 12 | 0000 958 1032 | Washer Ø 27 mm | 1 |
| 13 | 0000 958 1022 | Washer Ø 27 mm | 1 |
| 14 | 9460 624 0801 | E-clip 8x1.3 | 1 |
| 15 | not sold separately | Clutch drum not available as a separate item | 1 |
| 16 | 0000 642 1236 NLA | Rim sprocket 0.325" 7T | 1 |
| 17 | 0000 642 1234 NLA | Rim sprocket 0.325" 8T | 1 |
| 18 | 0000 642 1240 NLA | Rim sprocket 3/8" Picco 7T option | 1 |
| 19 | 0000 642 1241 NLA | Rim sprocket 3/8" Picco 8T optionno longer available from factory | 1 |
| 20 | 0000 642 1231 | Rim sprocket 3/8" 7T option | 1 |
| 22 | 1121 640 2001 NLA | Chain sprocket 0.325" 8T | 1 |
| 23 | not sold separately | Clutch drum not available as a separate item | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1121 160 2051 | Clutch | 1 |
| — | 1121 007 1037 NLA | Rim sprocket kit 0.325" 7T option | 1 |
| — | 1121 007 1038 NLA | Rim sprocket kit 0.325" 8T option | 1 |
| — | 1121 007 1039 NLA | Rim sprocket kit 3/8" Picco 7T option | 1 |
| — | 1121 007 1040 NLA | Rim sprocket kit 3/8" Picco 8T option | 1 |
| — | 1121 007 1041 | Rim sprocket kit 3/8" 7T option | 1 |
| — | 1121 007 1001 NLA | Rim sprocket kit 0.325" 7T option | 1 |
| — | 1121 007 1002 NLA | Rim sprocket kit 0.325" 8T option | 1 |
| — | 1121 007 1035 NLA | Rim sprocket kit 3/8" 7T option | 1 |
| — | 1121 007 1004 | Rim sprocket kit 3/8" Picco 7T | 1 |
| — | 1121 007 1005 | Rim sprocket kit 3/8" Picco 8T | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 024 / 026
024 / 026: cover washer requires modified clutch parts
Washer 1121 162 1001 must not be fitted with old carrier 1121 162 3205. The modified clutch is a replacement assembly for older machines.
- English USA TI31/2000 introduces a washer between oil pump and clutch to help prevent consequential crankcase/oil-pump damage after clutch-spring failure. That is the source design purpose, not a reproduced failure test or guaranteed protection.
- The cover washer 1121 162 1001 may be installed ONLY with modified carrier 1121 162 3201 and retainers 1127 162 3000. Do not attempt to fit it to the old clutch with carrier 1121 162 3205 and retainers 1121 162 3000: the previous clutch must be installed WITHOUT the washer. TOP on the washer faces the clutch.
- Complete clutch changes from 1121 160 2000 to 1121 160 2050, supplied with the cover washer as a replacement for older machines. Clutch shoe 1121 162 0801 is unchanged, and all other parts are as before. Complete matched-assembly replacement is not permission to add the washer to an old clutch.
- The table says the clutch includes items 1–5, but only numbered rows 2–5 are printed; the spring is drawn without its own numbered/order-number row. Preserve that omission rather than inventing item1 or a spring number.
- The clutch introduction is described as in the near future / in progress. No clutch serial cutoff is given; the page2 tank-system serial must not be applied here.
- The previous complete clutch was available only while factory stocks lasted; previous carriers and retainers remained available for older machines and other models. These historical supply statements neither identify those other models nor establish current inventory.
Source: TI 31/2000, p. 1 — Complete1: washer purpose, mandatory matched carrier/retainers, TOP orientation, all summary rows and three remarks.
Part numbers (8)
- 1121 160 2000 — Clutch completePrevious assembly; while stocks lasted · 024 / 026; English USA TI31/2000 configuration only
- 1121 160 2050 — Clutch complete with cover washerModified replacement for older machines · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 3205 — Clutch carrierPrevious; must remain without cover washer · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 3201 — Clutch carrierModified; required with cover washer · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 0801 — Clutch shoeUnchanged · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 3000 — RetainerPrevious · 024 / 026; English USA TI31/2000 configuration only
- 1127 162 3000 — RetainerModified; required with cover washer · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 1001 — Cover washerNew; TOP faces clutch · 024 / 026; English USA TI31/2000 configuration only
Wrong number or missing part for the 026? Report a correction →